×

Limit and shakedown analysis under hydrogen embrittlement condition. (English) Zbl 1392.74076

Summary: A modified shakedown theorem and its solving technique are presented to involve hydrogen embrittlement of steel into limit and shakedown analysis. Firstly, the shakedown theorem for hydrogen embrittled material is derived from a limited kinematic hardening shakedown theorem and hydrogen enhanced localized plasticity mechanism of hydrogen embrittlement. In the presented theorem, hydrogen’s effect is taken into account by the synergistic action of both strength reduction and stress redistribution. Secondly, a novel solving technique is developed based on the basis reduction method, in which the complicated constraints in the resulting nonlinear mathematical programming are released. At last, three numerical examples are carried out to verify the performance of the proposed method and to reveal hydrogen’s effect on the limit and shakedown load of structure. The numerical results are discussed and compared with those from literatures, which proves the accuracy and high efficiency of the introduced solving technique. It is concluded that the proposed theorem can predict the limit and shakedown load of hydrogen embrittled structure reasonably.

MSC:

74P10 Optimization of other properties in solid mechanics

Software:

WARP3D
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Dadfarnia, M; Nagao, A; Wang, S; Martin, ML; Somerday, BP; Sofronis, P, Recent advances on hydrogen embrittlement of structural materials, Int J Fract, 196, 223-243, (2015) · doi:10.1007/s10704-015-0068-4
[2] Fuschi P, Pisano AA, Weichert D (2015) Direct methods for limit and shakedown analysis of structures. Springer, Berlin · doi:10.1007/978-3-319-12928-0
[3] Nagumo M (2016) Mechanistic aspects of fracture I—brittle fracture models. In: Fundamentals of hydrogen embrittlement. Springer, Singapore, pp 197-215
[4] Pt, Sofronis; Liang, Y; Aravas, N, Hydrogen induced shear localization of the plastic flow in metals and alloys, Euro J Mech A Solids, 20, 857-872, (2001) · Zbl 1051.74040 · doi:10.1016/S0997-7538(01)01179-2
[5] Nagumo M (2016) Mechanistic aspects of fracture II—plasticity-dominated fracture models. In: Fundamentals of hydrogen embrittlement. Springer, Singapore, pp 217-239
[6] Liang, Y; Sofronis, P; Aravas, N, On the effect of hydrogen on plastic instabilities in metals, Acta Mater, 51, 2717-2730, (2003) · doi:10.1016/S1359-6454(03)00081-8
[7] Sobotka, J; Dodds, R; Sofronis, P, Effects of hydrogen on steady, ductile crack growth: computational studies, Int J Solids Struct, 46, 4095-4106, (2009) · Zbl 1183.74247 · doi:10.1016/j.ijsolstr.2009.08.002
[8] Novak, P; Yuan, R; Somerday, B; Sofronis, P; Ritchie, R, A statistical, physical-based, micro-mechanical model of hydrogen-induced intergranular fracture in steel, J Mech Phys Solids, 58, 206-226, (2010) · doi:10.1016/j.jmps.2009.10.005
[9] Chen, S; Liu, Y; Li, J; Cen, Z, Performance of the MLPG method for static shakedown analysis for bounded kinematic hardening structures, Eur J Mech A Solids, 30, 183-194, (2011) · Zbl 1261.74034 · doi:10.1016/j.euromechsol.2010.10.005
[10] Liu, Y; Zhang, X; Cen, Z, Lower bound shakedown analysis by the symmetric Galerkin boundary element method, Int J Plast, 21, 21-42, (2005) · Zbl 1112.74552 · doi:10.1016/j.ijplas.2004.01.003
[11] Akoa, F; Hachemi, A; Mouhtamid, S; Pham Dinh, T, Application of lower bound direct method to engineering structures, J Glob Optim, 37, 609-630, (2007) · Zbl 1149.90118 · doi:10.1007/s10898-006-9069-1
[12] Simon, J-W, Direct evaluation of the limit states of engineering structures exhibiting limited, nonlinear kinematical hardening, Int J Plast, 42, 141-167, (2013) · doi:10.1016/j.ijplas.2012.10.008
[13] Weichert, D; Gross-Weege, J, The numerical assessment of elastic-plastic sheets under variable mechanical and thermal loads using a simplified two-surface yield condition, Int J Mech Sci, 30, 757-767, (1988) · Zbl 0669.73029 · doi:10.1016/0020-7403(88)90040-9
[14] Sofronis, P, The influence of mobility of dissolved hydrogen on the elastic response of a metal, J Mech Phys Solids, 43, 1385-1407, (1995) · doi:10.1016/0022-5096(95)00037-J
[15] Heitzer, M; Pop, G; Staat, M, Basis reduction for the shakedown problem for bounded kinematic hardening material, J Glob Optim, 17, 185-200, (2000) · Zbl 1011.74009 · doi:10.1023/A:1008321026063
[16] Gullerud A, Koppenhoefer K, Roy A, Dodds jr R, Healy B, RoyChowdhury S, Walters M, Bichon B, Cochran K, Carlyle A (2012) Warp3D Release 17.3. 2 3D dynamic nonlinear fracture analysis of solids using parallel computers. User and theoretical manual, (University of Illinois) · Zbl 1112.74552
[17] Hachemi, A; Weichert, D, Numerical shakedown analysis of damaged structures, Comput Methods Appl Mech Eng, 160, 57-70, (1998) · Zbl 0939.74058 · doi:10.1016/S0045-7825(97)00283-1
[18] Du, X; Zhang, J; Peng, H; Liu, Y, Plastic limit analysis of modified 9cr-1mo steel pressure vessel containing volume defect with creep damage law, Int J Appl Mech, 9, 1750025, (2017) · doi:10.1142/S1758825117500259
[19] Huang, Y; Stein, E, Shakedown of a cracked body consisting of kinematic hardening material, Eng Fract Mech, 54, 107-112, (1996) · doi:10.1016/0013-7944(95)00119-0
[20] Huang, Y; Stein, E, Prediction of the fatigue threshold for a cracked body using shakedown theory, Fatigue Fract Eng Mater Struct, 18, 363-370, (1995) · doi:10.1111/j.1460-2695.1995.tb00882.x
[21] Li, Y; Yang, Z; Liu, Y; Li, S; Li, G; Hui, W; Weng, Y, The influence of hydrogen on very high cycle fatigue properties of high strength spring steel, Mater Sci Eng A, 489, 373-379, (2008) · doi:10.1016/j.msea.2008.01.089
[22] Nakamura, J; Miyahara, M; Omura, T; Semba, H; Wakita, M; Otome, Y, Degradation of fatigue properties in high pressure gaseous hydrogen environment evaluated by cyclic pressurization tests, Procedia Engineering, 2, 1235-1241, (2010) · doi:10.1016/j.proeng.2010.03.134
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.