×

Unified elastoplastic finite difference and its application. (English) Zbl 1400.74013

Summary: Two elastoplastic constitutive models based on the unified strength theory (UST) are established and implemented in an explicit finite difference code, fast Lagrangian analysis of continua (FLAC/FLAC3D), which includes an associated/non-associated flow rule, strain-hardening/softening, and solutions of singularities. Those two constitutive models are appropriate for metallic and strength-different (SD) materials, respectively. Two verification examples are used to compare the computation results and test data using the two-dimensional finite difference code FLAC and the finite element code ANSYS, and the two constitutive models proposed in this paper are verified. Two application examples, the large deformation of a prismatic bar and the strain-softening behavior of soft rock under a complex stress state, are analyzed using the three-dimensional code FLAC3D. The two new elastoplastic constitutive models proposed in this paper can be used in bearing capacity evaluation or stability analysis of structures built of metallic or SD materials. The effect of the intermediate principal stress on metallic or SD material structures under complex stress states, including large deformation, three-dimensional and non-association problems, can be analyzed easily using the two constitutive models proposed in this paper.

MSC:

74C05 Small-strain, rate-independent theories of plasticity (including rigid-plastic and elasto-plastic materials)
74S20 Finite difference methods applied to problems in solid mechanics

Software:

ANSYS; FLAC3D; FLAC
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Lode, W. Versuche ueber den Einlfuss der mittleren Hauptspannung auf dsa fliessen der metals eisen kupfer und nickel. Z. Physik., 36, 913-939 (1926) · doi:10.1007/BF01400222
[2] Taylor, G I; Quinney, H, The plastic distortion of metals, Phil. Trans. Roy. Soc., 230, 323-362, (1931) · Zbl 0003.08003
[3] Ivey, H J, Plastic stress-strain relations and yield surfaces for aluminium alloys, J. Mech. Eng. Sci., 3, 15-31, (1961) · doi:10.1243/JMES_JOUR_1961_003_005_02
[4] Mair, W M; Pugh, H L D, Effect of pre-strain on yield surfaces in copper, J. Mech. Eng. Sci., 6, 150-163, (1964) · doi:10.1243/JMES_JOUR_1964_006_025_02
[5] Michelis, P, Polyaxial yielding of granular rock, J. Eng. Mech., 111, 1049-1066, (1985) · doi:10.1061/(ASCE)0733-9399(1985)111:8(1049)
[6] Mogi, K, Effect of the intermediate principal stress on rock failure, J. Geophys. Res., 72, 5117-5131, (1967) · doi:10.1029/JZ072i020p05117
[7] William, K J; Warnke, E P, Constitutive model for the triaxial behavior of concrete, 1-30, (1975)
[8] Du, X L; Lu, D C; Gong, Q M; Zhao, M, Nonlinear unified strength criterion for concrete under three-dimensional stress states, J. Eng. Mech., 136, 51-59, (2010) · doi:10.1061/(ASCE)EM.1943-7889.0000055
[9] Green, G E; Bishop, A W, A note on the drained strength of sand under generalized strain conditions, Geotechnique, 19, 144-149, (1969) · doi:10.1680/geot.1969.19.1.144
[10] Lade, P V; Duncan, J M, Cubical triaxial tests on cohesionless soil, J. Soil Mech. Found. Div., 99, 793-812, (1973)
[11] Ochiai, H; Lade, P V, Three-dimensional behavior of sand with anisotropic fabric, Journal of Geotechnical Engineering, 109, 1313-1328, (1983) · doi:10.1061/(ASCE)0733-9410(1983)109:10(1313)
[12] Matsuoka, H; Nakai, T, Stress-deformation and strength characteristics of soil under three difference principal stress, Proceeding of Japan Society of Civil Engineers, 232, 59-70, (1974) · doi:10.2208/jscej1969.1974.232_59
[13] Xing, Y C; Liu, Z D; Zheng, Y R, A failure criterion of loess (in Chinese), Journal of Hydraulic Engineering, 1, 12-19, (1992)
[14] Lade, P V; Duncan, J M, Elastoplastic stress-strain theory for cohesionless soil, J. Geo. Eng. Div., 101, 1037-1053, (1975)
[15] Matsuoka, H; Sun, D A, Extension of spatially mobilized plane (SMP) to frictional and cohesive materials and its application to cemented sands, Soils and Foundations, 35, 63-72, (1995) · doi:10.3208/sandf.35.4_63
[16] Zienkiewicz, O. C. and Pande, G. N. Some Useful Forms of Isotropic Yield Surfaces for Soil and Rock Mechanics, Wiley, New York, 179-190 (1977)
[17] Yu, M H, Advances in strength theories for materials under complex stress state in the 20th century, Appl. Mech. Rev., 55, 169-218, (2002) · doi:10.1115/1.1472455
[18] Yu, M H, Twin shear stress yield criterion, Int. J. Mech. Sci., 25, 71-74, (1983) · doi:10.1016/0020-7403(83)90088-7
[19] Yu, M. H. Unified Strength Theory and Its Applications, Springer, Berlin (2004) · Zbl 1059.74002 · doi:10.1007/978-3-642-18943-2
[20] Vermeer, P A; Borst, R, Non-associated plasticity for soils concrete and rock, Heron, 29, 3-64, (1984)
[21] Yu, M H; Yang, S Y; Fan, S C; Ma, G W, Unified elasto-plastic associated and non-associated constitutive model and its engineering applications, Comput. Struct., 71, 627-636, (1999) · doi:10.1016/S0045-7949(98)00306-X
[22] Itasca Consulting Group. FLAC-Fast Lagrangian Analysis of Continua, User’s manual, Minneapolis (2005)
[23] Itasca Consulting Group. FLAC 3D-Fast Lagrangian Analysis of Continua in 3 Dimensions, User’s manual, Minneapolis (2005)
[24] Marti, J; Cundall, P, A. mixed discretization procedure for accurate modelling of plastic collapse, Int. J. Numer. Anal. Meth. Geomech., 6, 129-139, (1982) · Zbl 0475.73086 · doi:10.1002/nag.1610060109
[25] Bathe, K. J. and Wilson, E. L. Numerical Methods in Finite Element Analysis, Prentice-Hall, New Jersey (1976) · Zbl 0387.65069
[26] Koiter, W T, Stress-strain relations, uniqueness and variational theorems for elastic-plastic materials with singular yield surface, Quart. Appl. Math., 11, 350-354, (1953) · Zbl 0053.14003
[27] Sloan, S W; Booker, J R, Removal of singularities in Tresca and mohr-Coulomb yield functions, Commun. Appl. Numer. Mech., 2, 173-179, (1986) · Zbl 0585.73055 · doi:10.1002/cnm.1630020208
[28] Yu, H S, A close-form solution of stiffness matrix for Tresca and mohr-Coulomb plasticity models, Comput. Struct., 53, 755-757, (1994) · Zbl 0879.73077 · doi:10.1016/0045-7949(94)90116-3
[29] Theocaris, P S; Marketos, E, Elastic-plastic analysis of perforated thin strips of a strain-hardening material, J. Mech. Phys. Solids, 12, 377-390, (1964) · doi:10.1016/0022-5096(64)90033-X
[30] Zienkiewicz, O. C. The Finite Element Method in Engineering Science, McGraw-Hill, New York (1971) · Zbl 0237.73071
[31] Humpheson, C. and Naylor, D. J. The Importance of the Form of the Failure Criterion, University of Wales, Swansea (1975)
[32] Liao, H J; Su, L J; Pu, W C; Yin, J H, Test and numerical analysis of the constitutive relation of a diatomaceous soft rock, Marine Georesources & Geotechnology, 21, 183-200, (2003) · doi:10.1080/713773394
[33] Liao, H J; Pu, W C; Yin, J H, Numerical modeling of the effect of strain rate on the stress-strain relation for soft rock using a 3-D elastic visco-plastic model, Int. J. Rock. Mech. Min., 41, 423-423, (2004) · doi:10.1016/j.ijrmms.2003.12.020
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.