×

Modeling the development of large plastic deformations in a rotating disk in the Fidesys program. (Russian. English summary) Zbl 1434.74005

Summary: The paper presents a finite element analysis of the localization of plastic deformations in the region of fracture of the model disk during rotation. At a certain angular velocity of rotation of the disk, an “ejection” is observed experimentally. This effect occurs when the material stability is lost, is analogous to the known “necking” in the specimen tension. In view of the finiteness of the observed experimental displacements and for the detection of the “tightening” effect in a numerical experiment, the equilibrium equations are integrated taking into account the finite deformations. The model calculation was carried out in a quasi-static setting with a step-by-step increase in the rotational speed. The plastic behavior of the metal alloy of the disk material is described according to the Huber-Mises limit surface. The material parameters used in the calculation are determined from the experimental tension curve of the sample. Elasto-plastic governing relations are used in finite deformations with a multiplicative decomposition of the deformation gradient into the elastic and plastic components. In fully plastic deformation of metals, due to the constancy of the first invariant of plastic deformations, the process of deformation is close to isochoric. In such cases, linear isoparametric finite elements show the effect of “volumetric locking”, which distorts the numerical result. Therefore, in calculations we use twenty-node volume finite elements of the second order, which have no specific feature. The calculations were carried out on the IMERS-Fidesis hardware-software complex. The energy and noise efficiency of a cluster in distributed computations is studied. The article concludes by comparing the numerical results with the experimental data and the energy efficiency level of the cluster.

MSC:

74-10 Mathematical modeling or simulation for problems pertaining to mechanics of deformable solids
74C15 Large-strain, rate-independent theories of plasticity (including nonlinear plasticity)
74S05 Finite element methods applied to problems in solid mechanics

Software:

CAE Fidesys
PDFBibTeX XMLCite
Full Text: DOI MNR Link

References:

[1] Airworthiness of aircraft engines, AR-33, 2012
[2] Nozhnitsky Y. A., Fedina Y. A., Shadrin D. V., Servetnik A. N., “New possibilities of using spin rigs to provide gas turbine engine strength reliability”, Vestnik of the Samara State Aerospace University, 14:3-1 (2015), 71-87
[3] Servetnik A., “Energy-based method for gas turbine engine disks burst speed calculation”, 28th Congress of the International Council of the Aeronautical Sciences, ICAS2012 (Brisbane, 2012)
[4] Nozhnitsky Yu., Karimbaev K., Servetnik A., “Numerical simulation of spin testing for turbo machine disks using energy-based fracture criteria”, ASME TURBO EXPO (Copenhagen, 2012)
[5] Kuzmin E. P., Servetnik A. N., “Yield surface investigation of alloys during model disk spin tests”, Science and Education: Scientific Publication, 2014, no. 5, 330-339 · doi:10.7463/0514.0710005
[6] Birger I.A., Shorr B.F. (eds), Thermal strength of machine parts, Mashinostroenie, M., 1975 (Russia)
[7] Nadai A., Theory of Flow and Fracture of Solids, v. 2, McGraw-Hill, New York, 1963, 705 pp.
[8] Simo J. C., Hughes T. J. R., Computational Inelasticity, v. 7, Springer Verlag, New York, 1998, 392 pp. · Zbl 0934.74003
[9] The Fidesys system for strength analysis
[10] High-performance computing system IMMERS 6R6
[11] Levin V. A., Kalinin V. V., Zingerman K. M., Vershinin A. V., Growth of defects under finite strains. Computer simulation and physical modelling, ed. V.A. Levin, Fizmatlit, M., 2007
[12] Levin V. A., Vershinin A. V., Numerical methods. Parallel computing, Nonlinear computational strength mechanics, 2, ed. V.A. Levin, Fizmatlit, M., 2015
[13] Morozov E. M., Levin V. A., Vershinin A. V., Strength analysis. Fidesys in the hands of an engineer, URSS, M., 2015
[14] Zingerman K. M., Vershinin A. V., Levin V. A., “An approach for verification of finite-element analysis in nonlinear elasticity under large strains”, IOP Conf. Series: Materials Science and Engineering, 158 (2016), 012104 · doi:10.1088/1757-899X/158/1/012104
[15] V.A. Levin, K.M. Zingerman, A.V. Vershinin et al., “Numerical analysis of the stress concentration near holes originating in previously loaded viscoelastic bodies at finite strains”, International Journal of Solids and Structures, 50:20-21 (2013), 3119-3135 · doi:10.1016/j.ijsolstr.2013.05.019
[16] Vershinin A.V., Levin V.A., Komolova E.V. (eds), “Use of fully functional CAE Fidesys for the development of innovative parts for defence industry”, Mezhotraslevaya informacionnaya sluzhba, 2013, no. 4, 38-40
[17] Levin V. A., Vershinin A. V., “Industrial package for engineering strength analysis”, Proc. XI All-Russian Congress on theoretical and applied mechanics (Kazan, 2015), 2015, 2281-2283
[18] Sparsh Mittal, Jeffrey S. Vetter, “A Survey of CPU-GPU Heterogeneous Computing Techniques”, ACM Comput. Surv., 47:4 (2015), 69
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.