zbMATH — the first resource for mathematics

On a stress resultant geometrically exact shell model. I: Formulation and optimal parametrization. (English) Zbl 0692.73062
The review of main ideas and advantages of the geometrically exact shell models is presented. It is intended to show that classical shell theory, phrased as one-director Cosserat surface, leads to an efficient numerical implementation which is suitable for large scale computation. The local balance laws, the local constitutive equation and the weak form of the momentum equations are precisely formulated but in a form suitable for numerical analysis and finite element implementation. Next, the basic kinematics of the model, including the precise definitions of the resultant linear, angular, and direction momentum is considered. Then local momentum balance equation in terms of resultant is introduced. The invariant constitutive equations in terms of stress resultants and conjugate strain measures are developed. Some directions of subsequent research (mainly concerned with numerical analysis within the framework of the finite element method) are briefly discussed.
Reviewer: A.Žilinskas

74P99 Optimization problems in solid mechanics
74K15 Membranes
74S05 Finite element methods applied to problems in solid mechanics
74A20 Theory of constitutive functions in solid mechanics
74Axx Generalities, axiomatics, foundations of continuum mechanics of solids
74B20 Nonlinear elasticity
Full Text: DOI
[1] Abraham, R.; Marsden, J.E., Foundations of mechanics, (1978), Addison-Wesley Reading, MA
[2] Abraham, R.; Marsden, J.E.; Ratiu, T., Manifolds, tensor analysis and applications, (1987), Addison-Wesley, Springer New York · Zbl 0875.58002
[3] Ahmad, S.; Irons, B.M.; Zienkiewicz, O.C., Analysis of thick and thin shell structures by curved finite elements, Internat. J. numer. meths. engrg., 2, 419-451, (1970)
[4] Antman, S.S., Ordinary differential equations of nonlinear elasticity I: foundations of the theories of non-linearly elastic rods and shell, Arch. rat. mech. anal., 61, 4, 307-351, (1976) · Zbl 0354.73046
[5] Antman, S.S., Ordinary differential equations of nonlinear elasticity II: existency and regularity theory for conservative boundary value problems, Arch. rat. mech. anal., 61, 2, 353-393, (1976) · Zbl 0354.73047
[6] Argyris, J.H.; Scharpf, D.W., The SHEBA family of shell elements for the matrix displacement method. part I. natural definition of geometry and strains, Aeron. J. roy. aeron. soc., 72, 873-878, (1968)
[7] Argyris, J.H.; Scharpf, D.W., The SHEBA family of shell elements for the matrix displacement method, part II. interpolation scheme and stiffness matrix, Aeron. J. roy. aeron. soc., 71, 878-883, (1968)
[8] Argyris, J.H.; Scharpf, D.W., The SHEBA family of shell elements for the matrix displacement method, part III. large displacements, Aeron. J. roy. aeron. soc., 73, 423-426, (1969)
[9] Argyris, J.H.; Haase, M.; Malejannakis, G.A., Natural geometry of surfaces with specific reference to the matrix displacement analysis of shells, (), (5) · Zbl 0273.53001
[10] Argyris, J.H.; Dunne, P.C., A simple theory of geometrical stiffness with applications to beam and shell problems, () · Zbl 0397.73067
[11] Argyris, J.H., An excursion into large rotations, Comput. meths. appl. mech. engrg., 32, 85-155, (1982) · Zbl 0505.73064
[12] Bathe, K.J., Finite element procedures in engineering analysis, (1982), Prentice-Hall Englewood Cliffs, NJ · Zbl 0528.65053
[13] Bathe, K.J.; Dvorkin, E.N., A continuum mechanics based four-node shell element for general non-linear analysis, Internat. J. computer-aided engrg. software, 1, (1984)
[14] Beatty, M.F., Vector analysis of finite rigid rotations, J. appl. mech., 44, 501-502, (1977) · Zbl 0399.70007
[15] Bernadou, M.; Boisserie, J.M., The finite element method in thin shell theory: application to arch dam simulations, (1982), Birkhauser Boston, MA · Zbl 0497.73069
[16] Carroll, M.M.; Naghdi, P.M., The influence of the reference geometry on the response of elastic shells, Arch. rat. mech. anal., 48, 302-318, (1972) · Zbl 0283.73034
[17] Choquet-Bruhat, Y.; Dewitt-Morette, C., Analysis, manifolds and physics, (1984), North-Holland Amsterdam
[18] Cohen, H.; DeSilva, C.N., Nonlinear theory of elastic directed surface, J. math. phys., 7, 6, 960-966, (1966) · Zbl 0151.36904
[19] Cosserat, E.; Cosserat, F., Théorie des corps déformables, (), 953-1173, Paris · JFM 40.0862.02
[20] Crisfield, M., Finite elements on solution procedures for structural analysis, I, linear analysis, (1986), Pineridge Press Swansea, U.K · Zbl 0605.73062
[21] Ericksen, J.L.; Truesdell, C., Exact theory of stress and strain in rods and shells, Arch. rat. mech. anal., 1, 4, 295-323, (1958) · Zbl 0081.39303
[22] Goldstein, H., Classical mechanics, (1981), Addison-Wesley Reading, MA
[23] Green, A.E.; Laws, N., A general theory of rods, (), 145-155 · Zbl 0181.52505
[24] Green, A.E.; Naghdi, P.M., On the derivation of shell theories by direct approach, J. appl. mech., 173-176, (1974) · Zbl 0317.73057
[25] Green, A.E.; Zerna, W., Theoretical elasticity, (1960), Clarendon Press Oxford · Zbl 0155.51801
[26] Gurtin, M., An introduction to continuum mechanics, (1981), Academic Press New York · Zbl 0559.73001
[27] Hallquist, J.O.; Benson, D.J.; Goudreau, G.L., Implementation of a modified Hughes-Liu shell into a fully vectorized explicit finite element code, (), 283-297
[28] Hughes, T.J.R.; Liu, W.K., Nonlinear finite element analysis of shells: part I. three-dimensional shells, Comput. meths. appl. mech. engrg., 26, 331-362, (1981) · Zbl 0461.73061
[29] Hughes, T.J.R.; Liu, W.K., Nonlinear finite element analysis of shells: part II. two-dimensional shells, Comput. meths. appl. mech. engrg., 27, 167-182, (1981)
[30] Hughes, T.J.R.; Carnoy, E., Nonlinear finite element shell formulation accounting for large membrane strains, Comput. meths. appl. mech. engrg., 39, 69-82, (1983) · Zbl 0509.73083
[31] Hughes, T.J.R., The finite element method, (1987), Prentice-Hall Englewood Cliffs, NJ
[32] Libai, A.; Simmonds, J.G., Nonlinear elastic shell theory, () · Zbl 0575.73079
[33] Liu, W.K.; Law, E.S.; Lam, D.; Belytschko, T., Resultant-stress degenerated-shell element, Comput. meths. appl. mech. engrg., 55, 259-300, (1986) · Zbl 0587.73113
[34] Marsden, J.E.; Hughes, T.J.R., Mathematical foundations of elasticity, (1983), Prentice-Hall Englewood Cliffs, NJ · Zbl 0545.73031
[35] Naghdi, P.M., The theory of shells, () · Zbl 0154.22602
[36] Naghdi, P.M., Finite deformations of elastic rods and shells, () · Zbl 0523.73033
[37] Niordson, F.I., Shell theory, north-holland series in applied mathematics and mechanics, (1985), North-Holland Amsterdam
[38] Parks, K.C.; Stanley, G.M., A curved C0 shell element based on assumed natural-coordinate strains, J. appl. mech., 53, 2, 278-290, (1986) · Zbl 0588.73137
[39] Parish, H., Nonlinear analysis of shells using isoparametric elements, ()
[40] Ramm, E., A plate/shell element for large deflection and rotations, ()
[41] Simmonds, J.G.; Danielson, D.A., Nonlinear shell theory with a finite rotation vector, Kon. ned. ak. wet., B73, 460-478, (1970) · Zbl 0213.27103
[42] Simmonds, J.G.; Danielson, D.A., Nonlinear shell theory with finite rotation and stress-function vectors, J. appl. mech., 39, 1085-1090, (1972) · Zbl 0248.73043
[43] Simo, J.C., A finite strain beam formulation. the three-dimensional dynamic problem, Comput. meths. appl. mech. engrg., 49, 55-70, (1985), Part I · Zbl 0583.73037
[44] Simo, J.C.; Marsden, J.E.; Krishnaprassad, P.S., The Hamiltonian structure of elasticity. the convective representation of solids, rods and plates, Arch. rat. mech. anal., (1987), (to appear).
[45] Simo, J.C.; Quoc, L.V., A three-dimensional finite-strain rod model. part II: geometric and computational aspects, Comput. meths. appl. mech. engrg., 58, 79-116, (1986) · Zbl 0608.73070
[46] Simo, J.C.; Vu-Quoc, L., A beam model including shear and torsional warping distortions based on an exact geometric description of nonlinear deformations, Internat. J. solids and structures, (1987), (to appear).
[47] J.C. Simo and L. Vu-Quoc, On the dynamics in Space of rods undergoing large motions—A geometrically exact approach, Comput. Meths. Appl. Mech. Engrg. (to appear). · Zbl 0618.73100
[48] Stanley, G., Continuum-based shell elements, ()
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.