×

Stability analysis of rough surfaces in adhesive normal contact. (English) Zbl 1464.74059

Summary: This paper deals with adhesive frictionless normal contact between one elastic flat solid and one stiff solid with rough surface. After computation of the equilibrium solution of the energy minimization principle and respecting the contact constraints, we aim at studying the stability of this equilibrium solution. This study of stability implies solving an eigenvalue problem with inequality constraints. To achieve this goal, we propose a proximal algorithm which enables qualifying the solution as stable or unstable and that gives the instability modes. This method has a low computational cost since no linear system inversion is required and is also suitable for parallel implementation. Illustrations are given for the Hertzian contact and for rough contact.

MSC:

74G60 Bifurcation and buckling
74M15 Contact in solid mechanics
74M10 Friction in solid mechanics
74G65 Energy minimization in equilibrium problems in solid mechanics

Software:

UNLocBoX
PDFBibTeX XMLCite
Full Text: DOI Link

References:

[1] Carbone, G.; Mangialardi, L., Adhesion and friction of an elastic half-space in contact with a slightly wavy rigid surface, J Mech Phys Solids, 52, 1267-1287, (2004) · Zbl 1079.74587
[2] Carbone, G.; Mangialardi, L., Analysis of the adhesive contact of confined layers by using a Green’s function approach, J Mech Phys Solids, 56, 684-706, (2008) · Zbl 1171.74388
[3] Carbone, G.; Scaraggi, M.; Tartaglino, U., Adhesive contact of rough surfaces: comparison between numerical calculations and analytical theories, Eur Phys J E, 30, 65-74, (2009)
[4] Carpick, RW; Ogletree, DF; Salmeron, M., A general equation for fitting contact area and friction versus load measurements, J Colloid Interface Sci, 211, 395-400, (1978)
[5] Chateau, X.; Nguyen, Q., Buckling of elastic structures in unilateral contact, Eur J Mech A Solids, 10, 71-89, (1991) · Zbl 0735.73043
[6] Combettes PL, Pesquet JC (2011) Proximal splitting methods in signal processing. In: Fixed-point algorithms for inverse problems in science and engineering. Springer, pp 185-212
[7] Condat, L., A primal-dual splitting method for convex optimization involving Lipschitzian, proximable and linear composite terms, J Optim Theory Appl, 158, 460-479, (2013) · Zbl 1272.90110
[8] Costa, AP; Martins, J.; Figueiredo, I.; Júdice, J., The directional instability problem in systems with frictional contacts, Comput Methods Appl Mech Eng, 193, 357-384, (2004) · Zbl 1075.74596
[9] Da Costa AP, Figueiredo I, Júdice J, Martins J (2001) A complementarity eigenproblem in the stability analysis of finite dimensional elastic systems with frictional contact. In: Complementarity: applications, algorithms and extensions. Springer, pp 67-83 · Zbl 1119.74503
[10] Costa, AP; Seeger, A., Numerical resolution of cone-constrained eigenvalue problems, Comput Appl Math, 28, 37-61, (2009) · Zbl 1171.65027
[11] Costa, AP; Seeger, A., Cone-constrained eigenvalue problems: theory and algorithms, Comput Optim Appl, 45, 25-57, (2010) · Zbl 1193.65039
[12] Derjaguin, B.; Muller, V.; Toporov, Y., Effect of contact deformations on the adhesion of particles, J Colloid Interface Sci, 53, 314-326, (1975)
[13] Dong, C.; Bonnet, M., An integral formulation for steady-state elastoplastic contact over a coated half-plane, Comput Mech, 28, 105-121, (2002) · Zbl 1146.74367
[14] Glowinski R (2015) Variational methods for the numerical solution of nonlinear elliptic problems. SIAM, Philadelphia · Zbl 1333.65065
[15] Hu, YZ; Tonder, K., Simulation of 3-D random rough surface by 2-D digital filter and Fourier analysis, Int J Mach Tools Manuf, 32, 83-90, (1992)
[16] Jacq, C.; Nelias, D.; Lormand, G.; Girodin, D., Development of a three-dimensional semi-analytical elastic-plastic contact code, J Tribol, 124, 653-667, (2002)
[17] Jin, F.; Guo, X., Mechanics of axisymmetric adhesive contact of rough surfaces involving power-law graded materials, Int J Solids Struct, 50, 3375-3386, (2013)
[18] Johnson, K., The adhesion of two elastic bodies with slightly wavy surfaces, Int J Solids Struct, 32, 423-430, (1995) · Zbl 0865.73053
[19] Johnson KL (1994) Contact mechanics. Cambridge University Press, Cambridge
[20] Júdice, JJ; Sherali, HD; Ribeiro, IM, The eigenvalue complementarity problem, Comput Optim Appl, 37, 139-156, (2007) · Zbl 1181.90261
[21] Johnson, KL; Kendall, K.; Roberts, AD, Surface energy and the contact of elastic solids, Proc R Soc Lond A, 324, 301-313, (1971)
[22] Kesari, H.; Lew, AJ, Effective macroscopic adhesive contact behavior induced by small surface roughness, J Mech Phys Solids, 59, 2488-2510, (2011) · Zbl 1244.74093
[23] Longuet-Higgins, MS, Statistical properties of an isotropic random surface, Philos Trans R Soc A, 250, 157-174, (1957) · Zbl 0078.32701
[24] Maugis, D., Adhesion of spheres: the JKR-DMT transition using a Dugdale model, J Colloid Interface Sci, 150, 243-269, (1992)
[25] Maugis, D.; Barquins, M., Adhesive contact of sectionally smooth-ended punches on elastic half-spaces: theory and experiment, J Phys D Appl Phys, 16, 1843, (1983)
[26] Meakin P (1998) Fractals, scaling and growth far from equilibrium. Cambridge University Press, Cambridge · Zbl 1064.37500
[27] Müser, MH, Single-asperity contact mechanics with positive and negative work of adhesion: influence of finite-range interactions and a continuum description for the squeeze-out of wetting fluids, Beilstein J Nanotechnol, 5, 419-437, (2014)
[28] Müser MH, Dapp WB (2015) The contact mechanics challenge: problem definition. arXiv preprint arXiv:1512.02403
[29] Nguyen QS (2000) Stability and nonlinear solid mechanics. Wiley, Hoboken
[30] Papangelo, A.; Ciavarella, M., A Maugis Dugdale cohesive solution for adhesion of a surface with a dimple, J R Soc Interface, 14, 2016.0996, (2017)
[31] Parikh, N.; Boyd, S.; etal., Proximal algorithms. Foundations and Trends\({\textregistered }\), Optimization, 1, 127-239, (2014)
[32] Pastewka, L.; Robbins, MO, Contact between rough surfaces and a criterion for macroscopic adhesion, Proc Natl Acad Sci, 111, 3298-3303, (2014)
[33] Prokopovich, P.; Perni, S., Multiasperity contact adhesion model for universal asperity height and radius of curvature distributions, Langmuir, 26, 17028-17036, (2010)
[34] Putignano, C.; Afferrante, L.; Carbone, G.; Demelio, G., A new efficient numerical method for contact mechanics of rough surfaces, Int J Solids Struct, 42, 338-343, (2012)
[35] Queiroz, M.; Judice, J.; Humes, C., The symmetric eigenvalue complementarity problem, Math Comput, 73, 1849-1863, (2004) · Zbl 1119.90059
[36] Rey V, Anciaux G, Molinari JF (2017) Normal adhesive contact on rough surfaces: efficient algorithm for FFT-based BEM resolution. Comput Mech (accepted manuscript, 2017) · Zbl 1386.74105
[37] Seeger, A., Eigenvalue analysis of equilibrium processes defined by linear complementarity conditions, Linear Algebra Appl, 292, 1-14, (1999) · Zbl 1016.90067
[38] Stanley, HM; Kato, T., An FFT-based method for rough surface contact, J Tribol, 119, 481-485, (1997)
[39] Westergaard, H., Bearing pressures and cracks, J Appl Mech, 6, 49-53, (1937)
[40] Zhang, W.; Jin, F.; Zhang, S.; Guo, X., Adhesive contact on randomly rough surfaces based on the double-Hertz model, J Appl Mech, 81, 051,008, (2014)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.