×

zbMATH — the first resource for mathematics

Active multimodal vibration suppression of a flexible structure with piezoceramic sensor and actuator by using loop shaping. (English) Zbl 1271.74349
Summary: This paper represents active multimodal vibration control of a flexible beam structure with piezoceramic (PZT) actuators and sensors using the loop shaping method. With surface-bonded PZT patch actuators and sensors, the flexible beam has both sensing and actuating capacities. Due to its flat auto spectrum in the specified frequency range, the Schroeder wave is used as an excitation signal for the non-parametric identification of the flexible beam structure. The identified open loop model is then used for the closed loop design by using the loop shaping method based on the extended sensitivity charts. A loop shaping compensator is designed to achieve multimodal vibration suppression. Numerical results showed a reduction of 8 decibels for the first mode and 12–14 decibels for the second and third modes. Experimental results closely match the simulation results. Furthermore, the results of loop shaping method are compared with those of the methods of linear quadratic regulator and pole-placement control, which are designed based on state space models via the parametric identification of the flexible beam. Comparisons show that the loop shaping method is easier to design since a parametric identification is not required and requires less control effort while maintaining the effectiveness in vibration suppression.

MSC:
74M05 Control, switches and devices (“smart materials”) in solid mechanics
74H45 Vibrations in dynamical problems in solid mechanics
74F15 Electromagnetic effects in solid mechanics
PDF BibTeX XML Cite
Full Text: DOI
References:
[1] Albert DS, Journal of Noise Control Engineering 48 (2) pp 48– (2000)
[2] Bailey T, Journal of Guidance, Control, and Dynamics 8 (5) pp 605– (1985) · Zbl 0633.93047
[3] Bayon de Noyer MP, Journal of Intelligent Materials Systems and Structures 9 (7) pp 522– (1998)
[4] Blanguernon A, Smart Materials and Structures 8 pp 116– (1999)
[5] Bode HW, Network Analysis and Feedback Amplifier Design (1945)
[6] Butler R, Smart Materials and Structures 5 pp 386– (1996)
[7] Corr LR, Journal of Vibration and Acoustics 125 (2) pp 214– (2003)
[8] DOI: 10.2514/3.9792
[9] Den Hamer AJ, IEEE/ASME Transactions on Mechatronics 10 (2) pp 146– (2005)
[10] Ding J, Annual Reviews in Control 28 (2) pp 219– (2004)
[11] Falangas ET, IEEE Control Systems Magazine 14 (4) pp 34– (1994)
[12] Folcher J-P, In: Oceans ’02 MTS/IEEE, Biloxi, Mississippi, 29–31 October 2002, pp. pp 173– (2002)
[13] Gu H, Smart Materials and Structures 14 (4) pp 540– (2005)
[14] Gu H, Smart Materials and Structures 16 (4) pp 1453– (2007)
[15] Han JH, Materials Science Research International 5 (2) pp 122– (1999)
[16] Hsien TL, Control Engineering Practice 5 (7) pp 951– (1997)
[17] Kang YK, Journal of Intelligent Materials Systems and Structures 9 (12) pp 988– (1999)
[18] Kar IN, IEEE/ASME Transactions on Mechatronics 5 (1) pp 23– (2000)
[19] Kim JH, Smart Materials and Structures 8 (1) pp 1– (1999)
[20] Li CJ, Mechanical Systems and Signal Processing 13 pp 531– (1999)
[21] Manning WJ, Smart Materials and Structures 9 pp 932– (2000)
[22] DOI: 10.1109/9.256330 · Zbl 0755.93019
[23] Park K, In: Mechatronics and Embedded Systems and Applications (2008)
[24] Prakah-Asante KO, Smart Materials and Structures 3 pp 329– (1994)
[25] Rew KH, Journal of Intelligent Materials Systems and Structures 13 (1) pp 13– (2002)
[26] Sethi V, Journal of Intelligent Material Systems and Structures 19 pp 765– (2008)
[27] Song G, Journal of Vibration and Control 13 (8) pp 1095– (2007) · Zbl 1182.74178
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.