×

zbMATH — the first resource for mathematics

A three-dimensional sharp interface Cartesian grid method for solving high speed multi-material impact, penetration and fragmentation problems. (English) Zbl 1349.74376
Summary: This work presents a three-dimensional, Eulerian, sharp interface, Cartesian grid technique for simulating the response of elasto-plastic solid materials to hypervelocity impact, shocks and detonations. The mass, momentum and energy equations are solved along with evolution equations for deviatoric stress and plastic strain using a third-order finite difference scheme. Material deformation occurs with accompanying nonlinear stress wave propagation; in the Eulerian framework the boundaries of the deforming material are tracked in a sharp fashion using level-sets and the conditions on the immersed boundaries are applied by suitable modifications of a ghost fluid approach. The dilatational response of the material is modeled using the Mie-Gruneisen equation of state and the Johnson-Cook model is employed to characterize the material response due to rate-dependent plastic deformation. Details are provided on the treatment of the deviatoric stress ghost state so that physically correct boundary conditions can be applied at the material interfaces. An efficient parallel algorithm is used to handle computationally intensive three-dimensional problems. The results demonstrate the ability of the method to simulate high-speed impact, penetration and fragmentation phenomena in three dimensions.

MSC:
74S30 Other numerical methods in solid mechanics (MSC2010)
74M20 Impact in solid mechanics
74R99 Fracture and damage
65Y05 Parallel numerical computation
Software:
LS-DYNA; ParMETIS
PDF BibTeX Cite
Full Text: DOI
References:
[1] Hu, w.; Guang Yao, L.; Zhi Hua, Z., Parallel point interpolation method for three-dimensional metal forming simulations, Engineering Analysis with Boundary Elements, 31, 4, 326-342, (2007) · Zbl 1195.74285
[2] Baker, J.; Williams, A., Hypervelocity penetration of plate targets by rod and rod-like projectiles, International Journal of Impact Engineering, 5, 1-4, 101-110, (1987)
[3] Ahrens, T. J.; O’keefe, J. D., Impact on the Earth, Ocean and atmosphere, International Journal of Impact Engineering, 5, 1-4, 13-32, (1987)
[4] Benson, D.; Nellis, W., Dynamic compaction of copper powder: computation and experiment, Applied Physics Letters, 65, 4, 418-420, (2009)
[5] Smartt, S., The death of massive stars-I. observational constraints on the progenitors of type II P supernovae, Monthly Notices of the Royal Astronomical Society, 395, 3, 1409-1437, (2009)
[6] Liu, W., Metallic Glass coating on metals plate by adjusted explosive welding technique, Applied Surface Science, 255, 23, 9343-9347, (2009)
[7] Walters, W. P.; Zukas, J. A., Fundamentals of shaped charges, (1989), Wiley-Interscience
[8] Tran, L. B.; UdayKumar, H. S., A particle level set based sharp interface Cartesian grid method for impact, penetration, and void collapse, Journal of Computational Physics, 193, 2, 469-510, (2004) · Zbl 1109.74376
[9] Benson, D. J., Computational methods in Lagrangian and Eulerian hydrocodes, Computer Methods in Applied Mechanics Engineering, 99, 2-3, 235-394, (1995) · Zbl 0763.73052
[10] Anderson, C. E., An overview of the theory of hydrocodes, International Journal of Impact Engineering, 5, 1-4, 33-59, (1987)
[11] G. Johnson, User Instructions for the 1991 Version of the EPIC Research Code, DTIC Document, 1992.
[12] J.O. Hallquist, LS-DYNA userâ&z.euro;™s manual. Livermore software technology corporation, 2000.
[13] Camacho, G. T.; Ortiz, M., Adaptive Lagrangian modelling of ballistic penetration of metallic targets, Computer Methods in Applied Mechanics Engineering, 142, 3-4, 269-301, (1997) · Zbl 0892.73056
[14] Udaykumar, H. S., An Eulerian method for computation of multi-material impact with ENO shock-capturing and sharp interfaces, Journal of Computational Physics, 186, 1, 136-177, (2003) · Zbl 1047.76558
[15] Sambasivan, S.; Kapahi, A.; Udaykumar, H. S., Simulation of high speed impact, penetration and fragmentation problems on locally refined Cartesian grids, Journal of Computational Physics, 235, 334-370, (2013) · Zbl 1349.74376
[16] Sambasivan, S. K.; UdayKumar, H., Sharp interface simulations with local mesh refinement for multi-material dynamics in strongly shocked flows, Computers & Fluids, 39, 9, 1456-1479, (2010) · Zbl 1245.76111
[17] Cooper, S.; Benson, D.; Nesterenko, V., A numerical exploration of the role of void geometry on void collapse and hot spot formation in ductile materials, International Journal of Plasticity, 16, 5, 525-540, (2000) · Zbl 1043.74519
[18] Yoo, Y. H.; Lee, M., A three-dimensional FE analysis of large deformations for impact loadings using tetrahedral elements, Computational Mechanics, 30, 2, 96-105, (2003) · Zbl 1146.74366
[19] Paik, S., Parallel performance of large scale impact simulations on Linux cluster super computer, Computers & Structures, 84, 10-11, 732-741, (2006)
[20] Zhou, C.; Liu, G.; Lou, K., Three-dimensional penetration simulation using smoothed particle hydrodynamics, International Journal of Computational Methods, 4, 4, 671-692, (2007) · Zbl 1257.74117
[21] Belytschko, T.; Krysl, P.; Krongauz, Y., A three dimensional explicit element free Galerkin method, International Journal for Numerical Methods in Fluids, 24, 12, 1253-1270, (1997) · Zbl 0881.76048
[22] Bordas, S.; Rabczuk, T.; Zi, G., Three-dimensional crack initiation, propagation, branching and junction in non-linear materials by an extended meshfree method without asymptotic enrichment, Engineering Fracture Mechanics, 75, 5, 943-960, (2008)
[23] Souli, M.; Ouahsine, A.; Lewin, L., ALE formulation for fluid-structure interaction problems, Computer Methods in Applied Mechanics and Engineering, 190, 5-7, 659-675, (2000) · Zbl 1012.76051
[24] S. Finnegan et al., A study of obliquity effects on perforation and ricochet processes in thin plates impacted by compact fragments, in: Proceedings of 14th International Symposium on Ballistics, 1993.
[25] Ma, S.; Zhang, X., Material point method for impact and explosion problems, Computational Mechanics, 156-166, (2009)
[26] Ma, S.; Zhang, X.; Qiu, X., Comparison study of MPM and SPH in modeling hypervelocity impact problems, International Journal of Impact Engineering, 36, 2, 272-282, (2009)
[27] Sambasivan, S.; Udaykumar, H. S., Ghost fluid method for strong shock interactions. part 2: immersed solid boundaries, AIAA, 47, 10, 2923-2937, (2009)
[28] Sambasivan, S.; Udaykumar, H. S., Ghost fluid method for strong shock interactions. part 1: fluid – fluid interfaces, AIAA, 47, 12, 2907-2923, (2009)
[29] Sambasivan, S., Tree-based local mesh refinement for compressible multiphase flows, (AIAA Proceedings [np]. 05-08 Jan 2009, (2009), American Institute of Aeronautics and Astronautics 1801, Alexander Bell Dr., Suite 500 Reston, VA 20191-4344, USA)
[30] Kapahi, A.; Sambasivan, S.; UdayKumar, H., Three dimensional compressible multi-material flows, (AIAA Aerospace Science meeting including new horizons forum and aerospace exposition, (2010), AIAA Orlando, FL) · Zbl 1349.74376
[31] A. Kapahi, J. Mousel, S. Sambasivan, H.S. Udaykumar, Three dimensional compressible multi-material flow computations using a parallelized level set-based solver, in: Plasticity of Crystalline Materials: From Dislocations to Continuum, John Wiley & Sons, 2011.
[32] A. Kapahi, S. Sambasivan, J. Mousel, H.S. Udaykumar, Parallel, sharp interface Eulerian approach to high speed multi-material flows, Computers & Fluids, in press, http://dx.doi.org/10.1016/j.compfluid.2012.06.024. · Zbl 1290.76134
[33] Kulikovskii, A. G.; Pogorelov, N. V.; Semenov, A. Y., Mathematical aspects of numerical solution of hyperbolic systems, vol. 118, (2001), CRC Press · Zbl 0965.35001
[34] Simo, J.; Hughes, T., General return mapping algorithms for rate-independent plasticity, (1987), Elsevier Tucson, AZ
[35] A. Kapahi, S. Sambasivan, H.S. Udaykumar, Simulation of collapse and fragmentation phenomena in a sharp interface Eulerian setting, Computers & Fluids, in press, http://dx.doi.org/10.1016/j.compfluid.2012.09.007. · Zbl 1290.76005
[36] Johnson, G. R.; Cook, W. H., Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Engineering Fracture Mechanics, 21, 1, 31-48, (1985)
[37] Sethian, J. A., Level Set Methods and Fast Marching Methods: Evolving Interfaces in Computaional Geometry, Fluid Mechanics, Computer Vision, and Material Science, (1999), Cambridge University Press · Zbl 0973.76003
[38] Sethian, J. A., Evolution, implementation, application of levelsets and fast marching methods for advancing fronts, Journal of Computational Physics, 169, 2, 503-555, (2001) · Zbl 0988.65095
[39] Malladi, R.; Sethian, J. A.; Vemuri, B. C., Shape modeling with front propagation: a level set approach, IEEE Transactions on Pattern Analysis and Machine Intelligence, 17, 2, 158-175, (1995)
[40] Sethian, J. A., Level set methods and fast marching methods, Journal of Computing and Information Technology, 11, 1, 1-2, (2003)
[41] Sethian, J., Evolution, implementation, and application of level set and fast marching methods for advancing fronts, Journal of Computational Physics, 169, 2, 503-555, (2001) · Zbl 0988.65095
[42] Sethian, J.; Smereka, P., Level set methods for fluid interfaces, Annual Review of Fluid Mechanics, 35, 1, 341-372, (2003) · Zbl 1041.76057
[43] Sussman, M.; Smereka, P.; Osher, S., A level set approach for computing solutions to incompressible two-phase flow, Department of Mathematics, (1994), University of California Los Angeles · Zbl 0808.76077
[44] Fedkiw, R. P., A non oscillatory Eulerian approach to interfaces in multi-material flows (the ghost fluid method), Journal of Computational Physics, 152, 2, 457-492, (1999) · Zbl 0957.76052
[45] Liu, T.; Khoo, B.; Yeo, K., Ghost fluid method for strong shock impacting on material interface, Journal of Computational Physics, 190, 2, 651-681, (2003) · Zbl 1076.76592
[46] Meyers, M., Dynamic behavior of materials, (1994), Wiley-Interscience · Zbl 0893.73002
[47] Aslam, T. D., A partial differential equation approach to multidimensional extrapolation, Journal of Computational Physics, 193, 1, 349-355, (2004) · Zbl 1036.65002
[48] Kang, M.; Fedkiw, R.; Liu, X., A boundary condition capturing method for multiphase incompressible flow, Journal of Scientific Computing, 15, 3, 323-360, (2000) · Zbl 1049.76046
[49] Zel’Dovich, Y. B.; Raizer, Y. P., Physics of shock waves and high-temperature hydrodynamic phenomena, (2002), Dover Publ.
[50] Taylor, G. I., The use of flat ended projectiles for determining dynamic yield stress. I. theoretical considerations, Proceedings of the Royal Society of London, Series A, Mathematical and Physical Sciences, 194, 289-299, (1948)
[51] Shu, C. W.; Osher, S., Efficient implementation of essentially non-oscillatory shock capturing schemes II, Journal of Computational Physics, 83, 1, 32-78, (1989) · Zbl 0674.65061
[52] Liu, X.; Osher, S., Convex ENO high order multi-dimensional schemes without field by field decomposition or staggered grids, Journal of Computational Physics, 142, 2, 304-330, (1998) · Zbl 0941.65082
[53] Gropp, W. E.; Lusk, E.; Skjellum, A., Using MPI, (1999), MIT press
[54] G. Karypis, K. Schloegel, V. Kumar, Parmetis – parallel graph partitioning and sparse matrix ordering library, version 2.0, Univ. of Minnesota, Minneapolis, MN, 1998.
[55] Wang, J.; Liu, K.; Zhang, D., An improved CE/SE scheme for multi-material elastic – plastic flows and its applications, Computers & Fluids, 38, 3, 544-551, (2009) · Zbl 1193.76084
[56] Mehmandoust, B.; Pishevar, A. R., An Eulerian particle level set method for compressible deforming solids with arbitrary EOS, International Journal for Numerical Methods in Engineering, 79, 10, 1175-1202, (2009) · Zbl 1176.74202
[57] Hiermaier, S., (Hiermaier, Stefan, Structures Under Crash and Impact, (2008), Springer Berlin), 1, ISBN 978-0-387-73862-8
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.