zbMATH — the first resource for mathematics

A high-order adaptive Cartesian cut-cell method for simulation of compressible viscous flow over immersed bodies. (English) Zbl 1349.76370
Summary: A new adaptive finite volume conservative cut-cell method that is third-order accurate for simulation of compressible viscous flows is presented. A high-order reconstruction approach using cell centered piecewise polynomial approximation of flow quantities, developed in the past for body-fitted grids, is now extended to the Cartesian based cut-cell method. It is shown that the presence of cut-cells of very low volume results in numerical oscillations in the flow solution near the embedded boundaries when standard small cell treatment techniques are employed. A novel cell clustering approach for polynomial reconstruction in the vicinity of the small cells is proposed and is shown to achieve smooth representation of flow field quantities and their derivatives on immersed interfaces. It is further shown through numerical examples that the proposed clustering method achieves the design order of accuracy and is fairly insensitive to the cluster size. Results are presented for canonical flow past a single cylinder and a sphere at different flow Reynolds numbers to verify the accuracy of the scheme. Investigations are then performed for flow over two staggered cylinders and the results are compared with prior data for the same configuration. All the simulations are carried out with both quadratic and cubic reconstruction, and the results indicate a clear improvement with the cubic reconstruction. The new cut-cell approach with cell clustering is able to predict accurate results even at relatively low resolutions. The ability of the high-order cut-cell method in handling sharp geometrical corners and narrow gaps is also demonstrated using various examples. Finally, three-dimensional flow interactions between a pair of spheres in cross flow is investigated using the proposed cut-cell scheme. The results are shown to be in excellent agreement with past studies, which employed body-fitted grids for studying this complex case.

76M12 Finite volume methods applied to problems in fluid mechanics
65M08 Finite volume methods for initial value and initial-boundary value problems involving PDEs
76Nxx Compressible fluids and gas dynamics
Full Text: DOI
[1] Yang, G.; Causon, D.; Ingram, D., Calculation of compressible flows about complex moving geometries using a three-dimensional Cartesian cut cell method, Int. J. Numer. Methods Fluids, 33, 1121-1151, (2000) · Zbl 0980.76052
[2] Mittal, R.; Udaykumar, H.; Shyy, W., An accurate Cartesian grid method for viscous incompressible flows with complex immersed boundaries, J. Comput. Phys., 156, 209-240, (1999) · Zbl 0957.76043
[3] Fadlun, E.; Verzicoo, R.; Orlandi, R.; Mohd-Yusof, J., Combined immersed-boundary finite-difference methods for three-dimensional complex flow simulations, J. Comput. Phys., 161, 35-60, (2000) · Zbl 0972.76073
[4] Tseng, T.; Freziger, J., A ghost-cell immersed boundary method for flow in complex geometry, J. Comput. Phys., 192, 593-623, (2003) · Zbl 1047.76575
[5] Pogorelov, A. M.M.; Schröder, W., Cut-cell method based large-eddy simulation of tip-leakage flow, Phys. Fluids, 27, (2015)
[6] Gilmanov, A.; Sotiropoulos, F., A hybrid Cartesian/immersed boundary method for simulating flows with 3D, geometrically complex, moving bodies, J. Comput. Phys., 207, 457-492, (2005) · Zbl 1213.76135
[7] Hu, X.; Khoo, B.; Adams, N.; Huang, F., A conservative interface method for compressible flows, J. Comput. Phys., 219, 553-578, (2006) · Zbl 1102.76038
[8] Örley, F.; Pasquariello, V.; Hickel, S.; Adams, N., Cut-element based immersed boundary method for moving geometries in compressible liquid flows with cavitation, J. Comput. Phys., 283, 1-22, (2015) · Zbl 1351.76121
[9] Schneiders, L.; Hartmann, D.; Meinke, M.; Schröder, W., An accurate moving boundary formulation in cut-cell methods, J. Comput. Phys., 235, 786-809, (2012)
[10] Löhner, R.; Cebral, J.; Camelli, F.; Appanaboyina, A.; Baum, J.; Mestreau, E.; Soto, O., Adaptive embedded and immersed unstructured grid techniques, Comput. Methods Appl. Mech. Eng., 197, 2173-2197, (2008) · Zbl 1158.76408
[11] Jang, J.-Y.; Wu, M.-C., Numerical and experimental studies of three dimensional plate-fin and tube heat exchangers, Int. J. Heat Mass Transf., 39, 14, 3057-3066, (1996)
[12] Kim, I.; Elghobashi, S.; Sirignano, W., Three-dimensional flow over two spheres placed side by side, J. Fluid Mech., 246, 465-488, (1993) · Zbl 0825.76136
[13] Hartmann, D.; Meinke, M.; Schröder, W., A strictly conservative Cartesian cut-cell method for compressible viscous flows on adaptive grids, Comput. Methods Appl. Mech. Eng., 200, 1038-1052, (2011) · Zbl 1225.76211
[14] Ye, T.; Mittal, R.; Udaykumar, H.; Shyy, W., An accurate Cartesian grid method for viscous incompressible flows with complex immersed boundaries, J. Comput. Phys., 156, 209-240, (1999) · Zbl 0957.76043
[15] Kirkpatrick, M.; Armfield, S.; Kent, J., A representation of curved boundaries for the solution of the Navier-Stokes equations on a staggered three dimensional Cartesian grid, J. Comput. Phys., 184, 1-36, (2003) · Zbl 1118.76350
[16] Cecere, D.; Giacomazzi, E., An immersed volume method for large eddy simulation of compressible flows using a staggered-grid approach, Comput. Methods Appl. Mech. Eng., 280, 1-27, (2014) · Zbl 1423.76151
[17] Berger, M.; Aftosmis, M., Progress towards a Cartesian cut-cell method for viscous compressible flow, (50th AIAA Conference, Nashville, TN, (2012)), AIAA-2012-1301
[18] Duan, L.; Wang, X.; Zhong, X., A high-order cut-cell method for numerical simulation of hypersonic boundary-layer instability with surface roughness, J. Comput. Phys., 229, 19, 7207-7237, (2010) · Zbl 1425.76119
[19] Udin, H.; Kramer, R.; Pantano, C., A Cartesian-based embedded geometry technique with adaptive high-order finite differences for compressible flow around complex geometries, J. Comput. Phys., 262, 379-407, (2014) · Zbl 1349.76542
[20] Clarke, D.; Salas, M.; Hassan, H., Euler calculations for multi-element airfoils using Cartesian grids, AIAA J., 24, 1128-1135, (1986)
[21] Udaykumar, H.; Shyy, W.; Rao, M., A mixed eulerian-Lagrangian method for fluid flows with complex and moving boundaries, Int. J. Numer. Methods, 22, 691-705, (1996) · Zbl 0887.76059
[22] Majumdar, S.; Iaccarino, G.; Durbin, P., RANS solver with adaptive structured boundary non-conforming grids, (Annual Res. Briefs, Cent. Turb. Res., (2001)), 353-364
[23] Mittal, R.; Iaccarino, G., Immersed boundary methods, Annu. Rev. Fluid Mech., 37, 239-261, (2005) · Zbl 1117.76049
[24] Merlin, C.; Domingo, P.; Vervisch, L., Immersed boundaries in large eddy simulation of compressible flows, Flow Turbul. Combust., 90, 1, 29-68, (2012)
[25] Chung, M., Cartesian cut cell approach for simulating incompressible flows with rigid bodies of arbitrary shape, Comput. Fluids, 35, 606-623, (2006) · Zbl 1160.76369
[26] Meyer, M.; Hickel, S.; Adams, N., Assessment of implicit large-eddy simulation with a conservative immersed interface method for turbulent cylinder flow, Int. J. Heat Fluid Flow, 31, 3, 368-377, (2010)
[27] Seo, J.; Mittal, R., A sharp interface immersed boundary method with improved mass conservation and reduced spurious pressure oscillations, J. Comput. Phys., 230, 7347-7363, (2011) · Zbl 1408.76162
[28] Hartmann, D.; Meinke, M.; Schröder, W., An adaptive multilevel multigrid formulation for Cartesian hierarchical grid methods, Comput. Fluids, 37, 1103-1125, (2008) · Zbl 1237.76085
[29] Coirier, W.; Powell, K., Solution-adaptive Cartesian cell approach for viscous and inviscid flows, AIAA J., 34, 5, 938-945, (1996) · Zbl 0900.76407
[30] Ivan, L.; Groth, C., High-order solution-adaptive central essentially non-oscillatory (CENO) method for viscous flows, J. Comput. Phys., 257, A, 830-862, (2014) · Zbl 1349.76341
[31] Barth, T., Recent developments on high order k-exact reconstruction on unstructured meshes, (31st Aerospace Sciences Meet and Exhibit, Reno, AIAA-93-0668, (1993)), 1-15
[32] Toro, E., Riemann solvers and numerical methods for fluid mechanics, (2009), Springer
[33] Gottlieb, S., On high order strong stability preserving Runge-Kutta and multi step time discretizations, SIAM J. Sci. Comput., 25, 112, 105-128, (2005) · Zbl 1203.65166
[34] Gooch, C.; Alten, M., A high order accurate unstructured mesh finite volume scheme for the advection diffusion equation, J. Comput. Phys., 181, 729-752, (2002) · Zbl 1178.76251
[35] Lawson, C.; Hanson, R., Solving least squares problems, (1974), Prentice Hall Inc. · Zbl 0860.65028
[36] Penrose, R., A generalized inverse for matrices, Proc. Camb. Philos. Soc., 51, 406-413, (1955) · Zbl 0065.24603
[37] Osher, S.; Sethian, J., Fronts propagating with curvature-dependent speed: algorithms based on Hamilton-Jacobi formulations, J. Comput. Phys., 79, 12-49, (1988) · Zbl 0659.65132
[38] Osher, S.; Fedkiw, R., Level set methods and dynamic implicit surfaces, Applied Mathematical Science, vol. 153, (2003), Springer New York, N.Y. · Zbl 1026.76001
[39] Meyer, M.; Devesa, D.; Hickel, S.; Hu, X.; Adams, N., A conservative immersed interface method for large eddy simulation for incompressible flows, J. Comput. Phys., 229, 6300-6317, (2010) · Zbl 1425.76064
[40] Ingram, D.; Causon, D.; Mingham, C., Developments in Cartesian cut cell methods, Math. Comput. Simul., 61, 561-572, (2003) · Zbl 1205.76167
[41] CCSE, Boxlib user guide, (2012), Center for Computational Sciences and Engineering, Tech. rep.
[42] Liang, C.; Premasuthan, S.; Jameson, A., Higher order accurate simulation of low Mach laminar flow past two side by side cylinders using spectral difference method, Comput. Struct., 87, 812-827, (2009)
[43] Kim, C.-S., An immersed-boundary finite volume method for simulations of flow in complex geometeries, J. Comput. Phys., 171, 132-150, (2001) · Zbl 1057.76039
[44] Tritton, D., Experiments on flow past a circular cylinder at low Reynolds numbers, J. Fluid Mech., 6, 547-567, (1959) · Zbl 0092.19502
[45] Williamson, C., Oblique and parallel modes of vortex shedding in the wake of circular cylinder at low Reynolds numbers, J. Fluid Mech., 206, 579-627, (1989)
[46] Kang, S., Characteristics of flow over two circular cylinders in a side-by-side arrangement at low Reynolds numbers, Phys. Fluids, 15, 9, 2486-2498, (2003) · Zbl 1186.76270
[47] Sumner, D.; Price, S.; Paidoussis, P., Flow-pattern identification for two staggered circular cylinders in cross-flow, J. Fluid Mech., 411, 263-303, (2000) · Zbl 0951.76505
[48] Kesel, B. A., Aerodynamic characteristics of dragonfly wing sections compared with technical aerofoils, J. Exp. Biol., 203, 3125-3135, (2000)
[49] Vargas, A.; Mittal, R.; Dong, H., A computational study of the aerodynamic performance of a dragonfly wing section in gliding flight, Bioinspir. Biomim., 3, 026004, 1-13, (2008)
[50] Hu, H.; Tamai, M., Bioinspired corrugated airfoil at low Reynolds numbers, J. Aircr., 45, 6, 2068-2077, (2008)
[51] Johnson, T.; Patel, V., Flow past a sphere up to a Reynolds number of 300, J. Fluid Mech., 378, 19-70, (1999)
[52] Marella, S.; Krishnan, S.; Liu, H.; Udaykumar, H., Sharp interface Cartesian grid method I: an easily implemented technique for 3D moving boundary computations, J. Comput. Phys., 210, 1-31, (2005) · Zbl 1154.76359
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.