×

zbMATH — the first resource for mathematics

Advanced analysis of steel-concrete composite beam-columns by refined plastic hinge method. (English) Zbl 1359.74207

MSC:
74K10 Rods (beams, columns, shafts, arches, rings, etc.)
74G60 Bifurcation and buckling
PDF BibTeX XML Cite
Full Text: DOI
References:
[1] R. W. Furlong, J. Struct. Div.-ASCE 93(5), 113 (1967).
[2] M. Tomii, K. Yoshimura and Y. Morishita, Experimental studies on concrete filled steel tubular stub columns under concentric loading, Proc. Int. Colloquium on Stability of Structures Under Static and Dynamic Loads (1977) pp. 718-741.
[3] H. Shakir-Khalil and J. Zeghiche, The Structural Engineer 67(19), 346 (1989).
[4] S. A. Mirza, V. Hyttinen and E. Hyttinen, J. Struct. Eng.-ASCE 122(11), 1317 (1996), DOI: 10.1061/(ASCE)0733-9445(1996)122:11(1317). genRefLink(16, ’rf4’, ’10.1061%252F%2528ASCE%25290733-9445%25281996%2529122%253A11%25281317%2529’); genRefLink(128, ’rf4’, ’A1996VP26700010’); · doi:10.1061/(ASCE)0733-9445(1996)122:11(1317)
[5] J. Y. R. Liew and D. X. Xiong, J. Constr. Steel Res. 65(3), 709 (2009). genRefLink(16, ’rf5’, ’10.1016%252Fj.jcsr.2008.03.023’); genRefLink(128, ’rf5’, ’000263195300021’);
[6] G. C. Li, Z. J. Yang and Y. Lang, Adv. Steel Constr. 6(4), 963 (2010). genRefLink(128, ’rf6’, ’000284661700003’);
[7] AISC-American Institute of Steel Construction, Specifications for Structural Steel Buildings (AISC INC, Chicago, 2010) .
[8] BSI, Eurocode 4: Design of Composite Steel and Concrete Structures- Part 1.1: General Rules and Rules for Buildings, BS EN 1994-1-1 (BSI, London, 2004) .
[9] Code of Practice for Structural Use of Steel 2005, Buildings Department (SAR Government, Hong Kong, 2005) .
[10] M. Fong, Y. P. Liu and S. L. Chan, Eng. Struct. 32(6), 1681 (2010), DOI: 10.1016/j.engstruct.2010.02.016. genRefLink(16, ’rf10’, ’10.1016%252Fj.engstruct.2010.02.016’); genRefLink(128, ’rf10’, ’000278424500018’); · doi:10.1016/j.engstruct.2010.02.016
[11] J. L. Meek and W. J. Lin, J. Struct. Eng.-ASCE 116(6), 1473 (1990), DOI: 10.1061/(ASCE)0733-9445(1990)116:6(1473). genRefLink(16, ’rf11’, ’10.1061%252F%2528ASCE%25290733-9445%25281990%2529116%253A6%25281473%2529’); genRefLink(128, ’rf11’, ’A1990DF24800001’); · doi:10.1061/(ASCE)0733-9445(1990)116:6(1473)
[12] B. A. Izzuddin and A. S. Elnashai, Proc. Institution of Civil Engineers Structures and Buildings 99(3), 317 (1993), DOI: 10.1680/istbu.1993.24353. genRefLink(16, ’rf12’, ’10.1680%252Fistbu.1993.24353’); genRefLink(128, ’rf12’, ’A1993LW49700005’); · doi:10.1680/istbu.1993.24353
[13] Y. L. Pi and N. S. Trahair, J. Struct. Eng.-ASCE 120(7), 2041 (1994), DOI: 10.1061/(ASCE)0733-9445(1994)120:7(2041). genRefLink(16, ’rf13’, ’10.1061%252F%2528ASCE%25290733-9445%25281994%2529120%253A7%25282041%2529’); genRefLink(128, ’rf13’, ’A1994NT54800007’); · doi:10.1061/(ASCE)0733-9445(1994)120:7(2041)
[14] L. H. Teh and M. J. Clarke, J. Struct. Eng.-ASCE 125(11), 1328 (1999), DOI: 10.1061/(ASCE)0733-9445(1999)125:11(1328). genRefLink(16, ’rf14’, ’10.1061%252F%2528ASCE%25290733-9445%25281999%2529125%253A11%25281328%2529’); genRefLink(128, ’rf14’, ’000083250700014’); · doi:10.1061/(ASCE)0733-9445(1999)125:11(1328)
[15] X. M. Jiang, H. Chen and J. Y. R. Liew, J. Constr. Steel Res. 58(2), 193 (2002), DOI: 10.1016/S0143-974X(01)00041-4. genRefLink(16, ’rf15’, ’10.1016%252FS0143-974X%252801%252900041-4’); genRefLink(128, ’rf15’, ’000173890300001’); · doi:10.1016/S0143-974X(01)00041-4
[16] W. S. King and D. W. White, J. Struct. Eng.-ASCE 118(2), 408 (1992), DOI: 10.1061/(ASCE)0733-9445(1992)118:2(408). genRefLink(16, ’rf16’, ’10.1061%252F%2528ASCE%25290733-9445%25281992%2529118%253A2%2528408%2529’); genRefLink(128, ’rf16’, ’A1992HA12500005’); · doi:10.1061/(ASCE)0733-9445(1992)118:2(408)
[17] B. A. Izzuddin and A. S. Elnashai, Proc. Institution of Civil Engineers Structures and Buildings 99(3), 303 (1993), DOI: 10.1680/istbu.1993.24352. genRefLink(16, ’rf17’, ’10.1680%252Fistbu.1993.24352’); genRefLink(128, ’rf17’, ’A1993LW49700004’); · doi:10.1680/istbu.1993.24352
[18] J. Y. R. Liew, D. W. White and W. F. Chen, J. Struct. Eng.-ASCE 119(11), 3196 (1993), DOI: 10.1061/(ASCE)0733-9445(1993)119:11(3196). genRefLink(16, ’rf18’, ’10.1061%252F%2528ASCE%25290733-9445%25281993%2529119%253A11%25283196%2529’); genRefLink(128, ’rf18’, ’A1993MD13500006’); · doi:10.1061/(ASCE)0733-9445(1993)119:11(3196)
[19] W. Chen, S. Kim and S. Choi, Steel Structures 1, 213 (2001).
[20] C. K. Iu, Eng. Struct. 30(10), 2912 (2008), DOI: 10.1016/j.engstruct.2008.04.005. genRefLink(16, ’rf20’, ’10.1016%252Fj.engstruct.2008.04.005’); genRefLink(128, ’rf20’, ’000260749800029’); · doi:10.1016/j.engstruct.2008.04.005
[21] C. K. Iu, M. A. Bradford and W. F. Chen, Eng. Struct. 31(3), 799 (2009), DOI: 10.1016/j.engstruct.2008.12.007. genRefLink(16, ’rf21’, ’10.1016%252Fj.engstruct.2008.12.007’); genRefLink(128, ’rf21’, ’000263664000019’); · doi:10.1016/j.engstruct.2008.12.007
[22] A. Landesmann, J. Constr. Steel Res. 66(3), 323 (2010), DOI: 10.1016/j.jcsr.2009.10.014. genRefLink(16, ’rf22’, ’10.1016%252Fj.jcsr.2009.10.014’); genRefLink(128, ’rf22’, ’000274673600001’); · doi:10.1016/j.jcsr.2009.10.014
[23] F. Al-Mashary and W. F. Chen, The Structural Engineer 69(23), 395 (1991).
[24] C. Y. Yau and S. L. Chan, J. Struct. Eng.-ASCE 120(10), 2803 (1994), DOI: 10.1061/(ASCE)0733-9445(1994)120:10(2803). genRefLink(16, ’rf24’, ’10.1061%252F%2528ASCE%25290733-9445%25281994%2529120%253A10%25282803%2529’); genRefLink(128, ’rf24’, ’A1994PH60300001’); · doi:10.1061/(ASCE)0733-9445(1994)120:10(2803)
[25] S. L. Chan and P. P. T. Chui, Eng. Struct. 19(8), 628 (1997), DOI: 10.1016/S0141-0296(96)00138-1. genRefLink(16, ’rf25’, ’10.1016%252FS0141-0296%252896%252900138-1’); genRefLink(128, ’rf25’, ’A1997WW34500003’); · doi:10.1016/S0141-0296(96)00138-1
[26] S. L. Chan and Z. H. Zhou, J. Struct. Eng.-ASCE 120(6), 1703 (1994), DOI: 10.1061/(ASCE)0733-9445(1994)120:6(1703). genRefLink(16, ’rf26’, ’10.1061%252F%2528ASCE%25290733-9445%25281994%2529120%253A6%25281703%2529’); genRefLink(128, ’rf26’, ’A1994NM24800002’); · doi:10.1061/(ASCE)0733-9445(1994)120:6(1703)
[27] L. Duan and W. F. Chen, J. Struct. Eng.-ASCE 115(5), 1225 (1989), DOI: 10.1061/(ASCE)0733-9445(1989)115:5(1225). genRefLink(16, ’rf27’, ’10.1061%252F%2528ASCE%25290733-9445%25281989%2529115%253A5%25281225%2529’); genRefLink(128, ’rf27’, ’A1989U295200014’); · doi:10.1061/(ASCE)0733-9445(1989)115:5(1225)
[28] J. G. Orbison, W. McGuire and J. F. Abel, Comput. Method. Appl. M. 33(3), 557 (1982), DOI: 10.1016/0045-7825(82)90122-0. genRefLink(16, ’rf28’, ’10.1016%252F0045-7825%252882%252990122-0’); genRefLink(128, ’rf28’, ’A1982PR08700006’); · doi:10.1016/0045-7825(82)90122-0
[29] S. L. Chan and Z. H. Zhou, J. Struct. Eng.-ASCE 121(6), 939 (1995), DOI: 10.1061/(ASCE)0733-9445(1995)121:6(939). genRefLink(16, ’rf29’, ’10.1061%252F%2528ASCE%25290733-9445%25281995%2529121%253A6%2528939%2529’); genRefLink(128, ’rf29’, ’A1995QY86000004’); · doi:10.1061/(ASCE)0733-9445(1995)121:6(939)
[30] M. A. Crisfield, Comput. Struct. 13(3), 55 (1981), DOI: 10.1016/0045-7949(81)90108-5. genRefLink(16, ’rf30’, ’10.1016%252F0045-7949%252881%252990108-5’); genRefLink(128, ’rf30’, ’A1981LS27000007’); · doi:10.1016/0045-7949(81)90108-5
[31] S. L. Chan, Int. J. Numer. Meth. Eng. 26(12), 2657 (1988), DOI: 10.1002/nme.1620261206. genRefLink(16, ’rf31’, ’10.1002%252Fnme.1620261206’); genRefLink(128, ’rf31’, ’A1988R134100005’); · doi:10.1002/nme.1620261206
[32] BSI. Eurocode 2, Design of Concrete Structures- Part 1.1: General Rules and Rules for Buildings. BS EN 1992-1-1. London. BSI (2004) .
[33] R. Q. Bridge, Civil Engineering Transactions 18(2), 127 (1976).
[34] P. K. Neogi, H. K. Sen and J. C. Chapman, The Structural Engineer 47(5), 187 (1969).
[35] J. W. Roderick and D. F. Rogers, J. Struct. Div.-ASCE 95(ST2), 209 (1969).
[36] S. L. Chan and M. Fong, Adv. Steel Constr. 7(1), 17 (2011). genRefLink(128, ’rf36’, ’000288059900003’);
[37] M. Fong, S. L. Chan and B. Uy, Advanced design for trusses of steel and concrete-filled tubular sections, to appear in Eng. Struct. (2011) .
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.