×

Crystal plasticity model of residual stress in additive manufacturing using the element elimination and reactivation method. (English) Zbl 07492696

Summary: Selective laser melting is receiving increasing interest as an additive manufacturing technique. Residual stresses induced by the large temperature gradients and inhomogeneous cooling process can favour the generation of cracks. In this work, a crystal plasticity finite element model is developed to simulate the formation of residual stresses and to understand the correlation between plastic deformation, grain orientation and residual stresses in the additive manufacturing process. The temperature profile and grain structure from thermal-fluid flow and grain growth simulations are implemented into the crystal plasticity model. An element elimination and reactivation method is proposed to model the melting and solidification and to reinitialize state variables, such as the plastic deformation, in the reactivated elements. The accuracy of this method is judged against previous method based on the stiffness degradation of liquid regions by comparing the plastic deformation as a function of time induced by thermal stresses. The method is used to investigate residual stresses parallel and perpendicular to the laser scan direction, and the correlation with the maximum Schmid factor of the grains along those directions. The magnitude of the residual stress can be predicted as a function of the depth, grain orientation and position with respect to the molten pool. The simulation results are directly comparable to X-ray diffraction experiments and stress-strain curves.

MSC:

74-XX Mechanics of deformable solids

Software:

DAMASK; MOOSE; Neper
PDFBibTeX XMLCite
Full Text: DOI arXiv

References:

[1] Yang, KK; Zhu, JH; Wang, C.; Jia, DS; Song, LL; Zhang, WH, Experimental validation of 3d printed material behaviors and their influence on the structural topology design, Comput Mech, 61, 581-598 (2018)
[2] Luo, Z.; Zhao, Y., Efficient thermal finite element modeling of selective laser melting of inconel 718, Comput Mech, 65, 763-787 (2020) · Zbl 1477.74108
[3] Schwerdtfeger, J.; Körner, C., Selective electron beam melting of Ti-48Al-2Nb-2Cr: microstructure and aluminium loss, Intermetallics, 49, 29-35 (2014)
[4] Kruth, J-P; Mercelis, P.; Van Vaerenbergh, J.; Froyen, L.; Rombouts, M., Binding mechanisms in selective laser sintering and selective laser melting, Rapid Prototyping J, 11, 1, 26-36 (2005) · doi:10.1108/13552540510573365
[5] DebRoy, T.; Wei, H.; Zuback, J.; Mukherjee, T.; Elmer, J.; Milewski, J.; Beese, AM; Wilson-Heid, A.; De, A.; Zhang, W., Additive manufacturing of metallic components-process, structure and properties, Prog Mater Sci, 92, 112-224 (2018)
[6] Paul, R.; Anand, S.; Gerner, F., Effect of thermal deformation on part errors in metal powder based additive manufacturing processes, J Manuf Sci Eng, 136, 031009 (2014)
[7] Sames, WJ; List, F.; Pannala, S.; Dehoff, RR; Babu, SS, The metallurgy and processing science of metal additive manufacturing, Int Mater Rev, 61, 315-360 (2016)
[8] Li, C.; Liu, Z.; Fang, X.; Guo, Y., Residual stress in metal additive manufacturing, Procedia Cirp, 71, 348-353 (2018)
[9] Mercelis, P.; Kruth, JP, Residual stresses in selective laser sintering and selective laser melting, Rapid Prototyping J, 12, 5, 254-265 (2006) · doi:10.1108/13552540610707013
[10] Liang, X.; Chen, Q.; Cheng, L.; Hayduke, D.; To, AC, Modified inherent strain method for efficient prediction of residual deformation in direct metal laser sintered components, Comput Mech, 64, 1719-1733 (2019) · Zbl 1465.74098
[11] Prabhakar, P.; Sames, WJ; Dehoff, R.; Babu, SS, Computational modeling of residual stress formation during the electron beam melting process for inconel 718, Addit Manuf, 7, 83-91 (2015)
[12] Mukherjee, T.; Zhang, W.; DebRoy, T., An improved prediction of residual stresses and distortion in additive manufacturing, Comput Mater Sci, 126, 360-372 (2017)
[13] Mori, K., Finite element simulation of powder forming and sintering, Comput Methods Appl Mech Eng, 195, 6737-6749 (2006) · Zbl 1120.74826
[14] Grilli, N.; Tarleton, E.; Cocks, AC, Coupling a discrete twin model with cohesive elements to understand twin-induced fracture, Int J Fract, 227, 173-192 (2021)
[15] Leuders, S.; Thöne, M.; Riemer, A.; Niendorf, T.; Tröster, T.; Richard, Ha; Maier, H., On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance, Int J Fatigue, 48, 300-307 (2013)
[16] Grilli, N.; Cocks, AC; Tarleton, E., Crystal plasticity finite element modelling of coarse-grained \(\alpha \)-uranium, Comput Mater Sci, 171, 109276 (2020)
[17] Webster, G.; Wimpory, R., Non-destructive measurement of residual stress by neutron diffraction, J Mater Process Technol, 117, 395-399 (2001)
[18] Hocine, S.; Van Swygenhoven, H.; Van Petegem, S.; Chang, CST; Maimaitiyili, T.; Tinti, G.; Ferreira Sanchez, D.; Grolimund, D.; Casati, N., Operando X-ray diffraction during laser 3d printing, Mater Today, 34, 30-40 (2020)
[19] Vrancken, B.; Cain, V.; Knutsen, R.; Van Humbeeck, J., Residual stress via the contour method in compact tension specimens produced via selective laser melting, Scripta Mater, 87, 29-32 (2014)
[20] Mathar, J., Determination of initial stresses by measuring the deformation around drilled holes, Trans ASME, 56, 249-254 (1934)
[21] Martínez-García, V.; Pedrini, G.; Weidmann, P.; Killinger, A.; Gadow, R.; Osten, W.; Schmauder, S., Non-contact residual stress analysis method with displacement measurements in the nanometric range by laser made material removal and slm based beam conditioning on ceramic coatings, Surf Coat Technol, 371, 14-19 (2019)
[22] Bayat, M.; Dong, W.; Thorborg, J.; To, AC; Hattel, JH, A review of multi-scale and multi-physics simulations of metal additive manufacturing processes with focus on modelling strategies, Addit Manuf, 47, 102278 (2021)
[23] Ganeriwala, R.; Strantza, M.; King, W.; Clausen, B.; Phan, TQ; Levine, LE; Brown, DW; Hodge, N., Evaluation of a thermomechanical model for prediction of residual stress during laser powder bed fusion of Ti-6Al-4V, Addit Manuf, 27, 489-502 (2019)
[24] Yang, Q.; Zhang, P.; Cheng, L.; Min, Z.; Chyu, M.; To, AC, Finite element modeling and validation of thermomechanical behavior of Ti-6Al-4V in directed energy deposition additive manufacturing, Addit Manuf, 12, 169-177 (2016)
[25] Liang, X.; Cheng, L.; Chen, Q.; Yang, Q.; To, AC, A modified method for estimating inherent strains from detailed process simulation for fast residual distortion prediction of single-walled structures fabricated by directed energy deposition, Addit Manuf, 23, 471-486 (2018)
[26] Schoinochoritis, B.; Chantzis, D.; Salonitis, K., Simulation of metallic powder bed additive manufacturing processes with the finite element method: a critical review, Proc Inst Mech Eng, Part B: J Eng Manuf, 231, 96-117 (2017)
[27] Qian, G.; González-Albuixech, V.; Niffenegger, M., Probabilistic assessment of a reactor pressure vessel subjected to pressurized thermal shocks by using crack distributions, Nucl Eng Des, 270, 312-324 (2014)
[28] Yan, W.; Lu, Y.; Jones, K.; Yang, Z.; Fox, J.; Witherell, P.; Wagner, G.; Liu, WK, Data-driven characterization of thermal models for powder-bed-fusion additive manufacturing, Addit Manuf, 36, 101503 (2020)
[29] Bailey, NS; Katinas, C.; Shin, YC, Laser direct deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness, and residual stresses, J Mater Process Technol, 247, 223-233 (2017)
[30] Cheon, J.; Kiran, DV; Na, S-J, Thermal metallurgical analysis of GMA welded AH36 steel using CFD-FEM framework, Mater Des, 91, 230-241 (2016)
[31] Chen, F.; Yan, W., High-fidelity modelling of thermal stress for additive manufacturing by linking thermal-fluid and mechanical models, Mater Des, 196, 109185 (2020)
[32] Smith, J.; Xiong, W.; Yan, W.; Lin, S.; Cheng, P.; Kafka, OL; Wagner, GJ; Cao, J.; Liu, WK, Linking process, structure, property, and performance for metal-based additive manufacturing: computational approaches with experimental support, Comput Mech, 57, 583-610 (2016) · Zbl 1382.74140
[33] Yan, W.; Qian, Y.; Ge, W.; Lin, S.; Liu, WK; Lin, F.; Wagner, GJ, Meso-scale modeling of multiple-layer fabrication process in selective electron beam melting: inter-layer/track voids formation, Mater Des, 141, 210-219 (2018)
[34] Wei, H.; Mukherjee, T.; Zhang, W.; Zuback, J.; Knapp, G.; De, A.; DebRoy, T., Mechanistic models for additive manufacturing of metallic components, Prog Mater Sci, 116, 100703 (2021)
[35] Stender, ME; Beghini, LL; Sugar, JD; Veilleux, MG; Subia, SR; Smith, TR; San Marchi, CW; Brown, AA; Dagel, DJ, A thermal-mechanical finite element workflow for directed energy deposition additive manufacturing process modeling, Addit Manuf, 21, 556-566 (2018)
[36] Montevecchi, F.; Venturini, G.; Scippa, A.; Campatelli, G., Finite element modelling of wire-arc-additive-manufacturing process, Procedia Cirp, 55, 109-114 (2016)
[37] Lindgren, L-E; Runnemalm, H.; Näsström, MO, Simulation of multipass welding of a thick plate, Int J Numer Meth Eng, 44, 1301-1316 (1999) · Zbl 0927.74069
[38] Lindgren, L-E; Hedblom, E., Modelling of addition of filler material in large deformation analysis of multipass welding, Commun Numer Methods Eng, 17, 647-657 (2001) · Zbl 1079.74644
[39] Michaleris, P., Modeling metal deposition in heat transfer analyses of additive manufacturing processes, Finite Elem Anal Des, 86, 51-60 (2014)
[40] Ales TK (2018) An integrated model for the probabilistic prediction of yield strength in electron-beam additively manufactured Ti-6Al-4V, Ph.D. thesis, Iowa State University
[41] Miehe, C.; Welschinger, F.; Hofacker, M., Thermodynamically consistent phase-field models of fracture: variational principles and multi-field Fe implementations, Int J Numer Methods Eng, 83, 1273-1311 (2010) · Zbl 1202.74014
[42] Borden, M.; Hughes, T.; Landis, C.; Anvari, A.; Lee, I.; Oñate, E.; Peric, D.; de Souza Neto, E.; Chiumenti, M., Phase-field formulation for ductile fracture, Advances in computational plasticity. Computational methods in applied sciences (2018), Cham: Springer, Cham · Zbl 1493.74007
[43] Grilli, N.; Duarte, CA; Koslowski, M., Dynamic fracture and hot-spot modeling in energetic composites, J Appl Phys, 123, 065101 (2018)
[44] Chen, W.; Voisin, T.; Zhang, Y.; Florien, J-B; Spadaccini, CM; McDowell, DL; Zhu, T.; Wang, YM, Microscale residual stresses in additively manufactured stainless steel, Nat Commun, 10, 1-12 (2019)
[45] Wang, G.; Ouyang, H.; Fan, C.; Guo, Q.; Li, Z.; Yan, W.; Li, Z., The origin of high-density dislocations in additively manufactured metals, Mater Res Lett, 8, 283-290 (2020)
[46] Grilli, N.; Janssens, KG; Van Swygenhoven, H., Crystal plasticity finite element modelling of low cycle fatigue in FCC metals, J Mech Phys Solids, 84, 424-435 (2015)
[47] Grilli, N.; Earp, P.; Cocks, AC; Marrow, J.; Tarleton, E., Characterisation of slip and twin activity using digital image correlation and crystal plasticity finite element simulation: Application to orthorhombic \(\alpha \)-uranium, J Mech Phys Solids, 135, 103800 (2020)
[48] Yang, M.; Wang, L.; Yan, W., Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening, npj Comput Mater, 7, 56 (2021)
[49] Wang, YM; Voisin, T.; McKeown, JT; Ye, J.; Calta, NP; Li, Z.; Zeng, Z.; Zhang, Y.; Chen, W.; Roehling, TT, Additively manufactured hierarchical stainless steels with high strength and ductility, Nat Mater, 17, 63-71 (2018)
[50] Asaro, RJ; Rice, J., Strain localization in ductile single crystals, J Mech Phys Solids, 25, 309-338 (1977) · Zbl 0375.73097
[51] Kalidindi, SR, Incorporation of deformation twinning in crystal plasticity models, J Mech Phys Solids, 46, 267-290 (1998) · Zbl 0945.74014
[52] Vujošević L, Lubarda V (2002) Finite-strain thermoelasticity based on multiplicative decomposition of deformation gradient. Theoretical and Applied Mechanics 379-399 · Zbl 1079.74020
[53] Roters, F.; Eisenlohr, P.; Hantcherli, L.; Tjahjanto, DD; Bieler, TR; Raabe, D., Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications, Acta Mater, 58, 1152-1211 (2010)
[54] Roters, F.; Diehl, M.; Shanthraj, P.; Eisenlohr, P.; Reuber, C.; Wong, S.; Maiti, T.; Ebrahimi, A.; Hochrainer, T.; Fabritius, H-O; Nikolov, S.; Friák, M.; Fujita, N.; Grilli, N.; Janssens, K.; Jia, N.; Kok, P.; Ma, D.; Meier, F.; Werner, E.; Stricker, M.; Weygand, D.; Raabe, D., DAMASK—The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale, Comput Mater Sci, 158, 420-478 (2019)
[55] Rice, JR, Inelastic constitutive relations for solids: an internal-variable theory and its application to metal plasticity, J Mech Phys Solids, 19, 433-455 (1971) · Zbl 0235.73002
[56] Peirce, D.; Asaro, RJ; Needleman, A., Material rate dependence and localized deformation in crystalline solids, Acta Metall, 31, 1951-1976 (1983)
[57] Daymond, M.; Bouchard, P., Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures, Metall and Mater Trans A, 37, 1863-1873 (2006)
[58] Grilli, N.; Tarleton, E.; Edmondson, PD; Gussev, MN; Cocks, ACF, In situ measurement and modelling of the growth and length scale of twins in \(\alpha \)-uranium, Phys Rev Mater, 4, 043605 (2020)
[59] Kalidindi, SR; Anand, L., An approximate procedure for predicting the evolution of crystallographic texture in bulk deformation processing of FCC metals, Int J Mech Sci, 34, 309-329 (1992)
[60] Callen, HB, Thermodynamics and an introduction to thermostatistics (1998), Hoboken: Wiley, Hoboken · Zbl 0989.80500
[61] Dubrovinsky, L.; Parker, G., Thermal expansion and equation of state, Encyclopedia of materials: science and technology, 1-4 (2002), Amsterdam: Elsevier, Amsterdam
[62] Yadroitsev, I.; Yadroitsava, I., Evaluation of residual stress in stainless steel 316L and Ti6Al4V samples produced by selective laser melting, Virtual Phys Prototyping, 10, 67-76 (2015)
[63] Grimvall, G., Thermophysical properties of materials (1999), Amsterdam: Elsevier, Amsterdam
[64] Jiang, W.; Zhang, Y.; Woo, W., Using heat sink technology to decrease residual stress in 316L stainless steel welding joint: finite element simulation, Int J Press Vessels Pip, 92, 56-62 (2012)
[65] Grilli, N.; Koslowski, M., The effect of crystal orientation on shock loading of single crystal energetic materials, Comput Mater Sci, 155, 235-245 (2018)
[66] Reed, R.; Horiuchi, T., Austenitic steels at low temperatures (1982), New York: Plenum press, New York
[67] Grilli, N.; Janssens, K.; Nellessen, J.; Sandlöbes, S.; Raabe, D., Multiple slip dislocation patterning in a dislocation-based crystal plasticity finite element method, Int J Plast, 100, 104-121 (2018)
[68] Reddy, JN, Introduction to the finite element method (2019), New York: McGraw-Hill Education, New York
[69] Permann, CJ; Gaston, DR; Andrš, D.; Carlsen, RW; Kong, F.; Lindsay, AD; Miller, JM; Peterson, JW; Slaughter, AE; Stogner, RH; Martineau, RC, MOOSE: enabling massively parallel multiphysics simulation, SoftwareX, 11, 100430 (2020)
[70] Adhikary, DP; Jayasundara, C.; Podgorney, RK; Wilkins, AH, A robust return-map algorithm for general multisurface plasticity, Int J Numer Methods Eng, 109, 218-234 (2016)
[71] Chockalingam, K.; Tonks, M.; Hales, J.; Gaston, D.; Millett, P.; Zhang, L., Crystal plasticity with Jacobian-free Newton-Krylov, Comput Mech, 51, 617-627 (2013) · Zbl 1311.74027
[72] Lee EH (1969) Elastic-plastic deformation at finite strains. J. Appl. Mech. Mar 36(1): 1-6. doi:10.1115/1.3564580 · Zbl 0179.55603
[73] Clausen, B.; Lorentzen, T.; Leffers, T., Self-consistent modelling of the plastic deformation of F.C.C. polycrstals and its implications for diffraction measurements of internal stresses, Acta Mater, 46, 3087-3098 (1998)
[74] Yushu D., Jiang W, Tan C, Sun C, Schwen D, Spencer B (2021) A thermal-mechanical model for directed energy deposition process with element activation (under review)
[75] Yan, W.; Ge, W.; Qian, Y.; Lin, S.; Zhou, B.; Liu, WK; Lin, F.; Wagner, GJ, Multi-physics modeling of single/multiple-track defect mechanisms in electron beam selective melting, Acta Mater, 134, 324-333 (2017)
[76] Wang, L.; Zhang, Y.; Yan, W., Evaporation model for keyhole dynamics during additive manufacturing of metal, Phys Rev Appl, 14, 064039 (2020)
[77] Khairallah, SA; Anderson, AT; Rubenchik, A.; King, WE, Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones, Acta Mater, 108, 36-45 (2016)
[78] Körner, C.; Bauereiß, A.; Attar, E., Fundamental consolidation mechanisms during selective beam melting of powders, Modell Simul Mater Sci Eng, 21, 085011 (2013)
[79] Quey, R.; Dawson, P.; Barbe, F., Large-scale 3d random polycrystals for the finite element method: generation, meshing and remeshing, Comput Methods Appl Mech Eng, 200, 1729-1745 (2011) · Zbl 1228.74093
[80] Grilli N (2016) Physics-based constitutive modelling for crystal plasticity finite element computation of cyclic plasticity in fatigue, Ph.D. thesis, École Polytechnique Fédérale de Lausanne
[81] Kumar, BR, Influence of crystallographic textures on tensile properties of 316L austenitic stainless steel, J Mater Sci, 45, 2598-2605 (2010)
[82] Sinha, S.; Szpunar, JA; Kumar, NK; Gurao, N., Tensile deformation of 316L austenitic stainless steel using in-situ electron backscatter diffraction and crystal plasticity simulations, Mater Sci Eng, A, 637, 48-55 (2015)
[83] Vrancken, B.; Ganeriwala, RK; Matthews, MJ, Analysis of laser-induced microcracking in tungsten under additive manufacturing conditions: experiment and simulation, Acta Mater, 194, 464-472 (2020)
[84] Liu, Y.; Yang, Y.; Wang, D., A study on the residual stress during selective laser melting (SLM) of metallic powder, Int J Adv Manuf Technol, 87, 647-656 (2016)
[85] Wilson-Heid, AE; Qin, S.; Beese, AM, Multiaxial plasticity and fracture behavior of stainless steel 316L by laser powder bed fusion: experiments and computational modeling, Acta Mater, 199, 578-592 (2020)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.