×

Generation of segmental chips in metal cutting modeled with the PFEM. (English) Zbl 1458.74138

Summary: The Particle Finite Element Method, a lagrangian finite element method based on a continuous Delaunay re-triangulation of the domain, is used to study machining of Ti6Al4V. In this work the method is revised and applied to study the influence of the cutting speed on the cutting force and the chip formation process. A parametric methodology for the detection and treatment of the rigid tool contact is presented. The adaptive insertion and removal of particles are developed and employed in order to sidestep the difficulties associated with mesh distortion, shear localization as well as for resolving the fine-scale features of the solution. The performance of PFEM is studied with a set of different two-dimensional orthogonal cutting tests. It is shown that, despite its Lagrangian nature, the proposed combined finite element-particle method is well suited for large deformation metal cutting problems with continuous chip and serrated chip formation.

MSC:

74S05 Finite element methods applied to problems in solid mechanics
74M15 Contact in solid mechanics

Software:

pfem
PDF BibTeX XML Cite
Full Text: DOI

References:

[1] Bäker, M, Finite element simulation of high-speed cutting forces, J Mater Process Technol, 176, 117-126, (2006)
[2] Belytschko T, Liu WK, Moran B (2000) Nonlinear finite element for continua and structures. Wiley, New York · Zbl 0959.74001
[3] Bonet J, Wood RD (1997) Nonlinear continuum mechanics for finite element analysis. Cambridge University Press, Cambridge · Zbl 0891.73001
[4] Cante, J; Dávalos, C; Hernández, JA; Oliver, J; Jonsén, P; Gustafsson, G; Häggblad, HÄ, PFEM-based modeling of industrial granular flows, Computat Part Mech, 1, 47-70, (2014)
[5] Carbonell JM (2009) Modeling of ground excavation with the particle finite element method. Ph.D. thesis, Universitat Politècnica de Catalunya (UPC), Barcelona
[6] Delaunay, BN, Sur la sphère vide, A la memoire de georges Voronoi, Otdelenie Matematicheskii i Estestvennyka Nauk, 7, 793-800, (1934) · JFM 60.0946.06
[7] Micheli, PO; Mocellin, K, 2D high speed machining simulations using a new explicit formulation with linear triangular elements, Int Mach Mach Mater, 9, 266-281, (2011)
[8] Dohrmann, CR; Bochev, PB, A stabilized finite element method for the Stokes problem based on polynomial pressure projections, Int J Numer Methods Fluids, 46, 183-201, (2004) · Zbl 1060.76569
[9] Edelsbrunner, H; Mucke, EP, Three dimensional alpha shapes, ACM Trans Graph, 13, 43-72, (1994) · Zbl 0806.68107
[10] Franci A (2015) Unified Lagrangian formulation for fluid and solid mechanics, fluid-structure interaction and coupled thermal problems using the PFEM. Ph.D. thesis, Universitat Politècnica de Catalunya (UPC), Barcelona · Zbl 1366.76001
[11] Idelsohn, SR; Oñate, E; Pin, FD, The particle finite element method: a powerful tool to solve incompressible flows with free-surfaces and breaking waves, Int J Numer Methods Eng, 61, 964-989, (2004) · Zbl 1075.76576
[12] Marusich, TD; Ortiz, M, Modelling and simulation of high-speed machining, Int J Numer Methods Eng, 38, 3675-3694, (1995) · Zbl 0835.73077
[13] Moran, B; Ortiz, M; Shih, CF, Formulation of implicit finite element methods for multiplicative finite deformation plasticity, Int J Numer Methods Eng, 29, 483-514, (1990) · Zbl 0724.73221
[14] Oliver, J; Cante, JC; Weyler, R; González, C; Hernández, J, Particle finite element methods in solid mechanics problems, Computat Methods Appl Sci, 7, 87-103, (2007)
[15] Oliver, J; Huespe, AE; Cante, JC, An implicit/explicit integration scheme to increase computability of non-linear material and contact/friction problems, Comput Methods Appl Mech Eng, 197, 1865-1889, (2008) · Zbl 1194.74507
[16] Oñate, E; Celigueta, MA; Idelsohn, SR, Modeling bed erosion in free surface flows by the particle finite element method, Acta Geotech, 1, 237-252, (2006)
[17] Oñate, E; Idelsohn, SR; Celigueta, MA; Rossi, R, Advances in the particle finite element method for the analysis of fluid-multibody interaction and bed erosion in free surface flows, Comput Methods Appl Mech Eng, 197, 1777-1800, (2008) · Zbl 1194.74460
[18] Owen, DRJ; Vaz, M, Computational techniques applied to high-speed machining under adiabatic strain localization conditions, Comput Methods Appl Mech Eng, 171, 445-461, (1999) · Zbl 0937.74068
[19] Rodríguez JM (2014) Numerical modeling of metal cutting processes using the particle finite element method(PFEM). Ph.D. thesis, Universitat Politècnica de Catalunya (UPC), Barcelona
[20] Rodríguez, JM; Cante, JC; Oliver, J, On the numerical modelling of machining processes via the particle finite element method (PFEM), CIMNE: Barcelona, 156, 186, (2015)
[21] Rodríguez, JM; Carbonell, JM; Cante, JC; Oliver, J, The particle finite element method (PFEM) in thermo mechanical problems, Int J Numer Methods Eng, (2016) · Zbl 1352.74426
[22] Rodriguez, JM; Jonsén, P; Svoboda, A, Simulation of metal cutting using the particle finite-element method and a physically based plasticity model, Comput Part Mech, (2016)
[23] Sabel, M; Sator, C; Müller, R, A particle finite element method for machining simulations, Comput Mech, 54, 123-131, (2014) · Zbl 1398.74398
[24] Sabel, M; Sator, C; Zohdi, TI; Müller, R, Application of the particle finite element method in machining simulation discussion of the alpha-shape method in the context of strength of materials, ASME J Comput Inf Sci Eng, 17, 1-7, (2016)
[25] Sekhon, GS; Chenot, JL, Numerical simulation of continuous chip formation during non-steady orthogonal cutting simulation, Eng Comput, 1, 31-48, (1993)
[26] Shewchuk JR (1998) A condition guaranteeing the existence of higher-dimensional constrained Delaunay triangulations. In: Proceedings of the fourteenth annual symposium on Computational geometry, ACM, Minneapolis, MN, USA, pp 76-85
[27] Simo, JC, A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition: part I. continuum formulation, Comput Methods Appl Mech Eng, 666, 199-219, (1988) · Zbl 0611.73057
[28] Simo, JC, A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition. part II: computational aspects, Comput Methods Appl Mech Eng, 68, 1-31, (1988) · Zbl 0644.73043
[29] Simo, JC; Miehe, C, Associative coupled thermoplasticity at finite strains: formulation, numerical analysis and implementation, Comput Methods Appl Mech Eng, 98, 41-104, (1992) · Zbl 0764.73088
[30] Simo JC, Hughes TJR (1998) Computational inelasticity. Springer, New York · Zbl 0934.74003
[31] Strenkowski, JS; Carroll, JT, A finite element model of orthogonal metal cutting, J Eng Ind Trans ASME, 107, 349-354, (1985)
[32] Zhang, X; Krabbenhoft, K; Sheng, D; Li, W, Numerical simulation of a flow-like landslide using the particle finite element method, Comput Mech, 55, 167-177, (2015) · Zbl 1311.76141
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.