zbMATH — the first resource for mathematics

Gradient based biobjective shape optimization to improve reliability and cost of ceramic components. (English) Zbl 1452.74095
Summary: We consider the simultaneous optimization of the reliability and the cost of a ceramic component in a biobjective PDE constrained shape optimization problem. A probabilistic Weibull-type model is used to assess the probability of failure of the component under tensile load, while the cost is assumed to be proportional to the volume of the component. Two different gradient-based optimization methods are suggested and compared at 2D test cases. The numerical implementation is based on a first discretize then optimize strategy and benefits from efficient gradient computations using adjoint equations. The resulting approximations of the Pareto front nicely exhibit the trade-off between reliability and cost and give rise to innovative shapes that compromise between these conflicting objectives.
Reviewer: Reviewer (Berlin)

74P10 Optimization of other properties in solid mechanics
49Q10 Optimization of shapes other than minimal surfaces
60G55 Point processes (e.g., Poisson, Cox, Hawkes processes)
90B25 Reliability, availability, maintenance, inspection in operations research
Full Text: DOI
[1] Allaire, G., Shape opimization by the homogenisation method (2001), New York: Springer, New York
[2] Allaire, G.; Jouve, F., Minimum stress optimal design with the level set method, Eng Anal Bound Elem, 32, 909-918 (2008) · Zbl 1244.74104
[3] Bäker M, Harders H, Rösler J (2008) Mechanisches Verhalten der Werkstoffe, 3rd edn. Vieweg+Teubner
[4] Bazaraa, MS; Sherali, HD; Shetty, CM, Nonlinear programming—theory and algorithms (2006), Hoboken: Wiley, Hoboken
[5] Bolten M, Gottschalk H, Schmitz S (2015) Minimal failure probability for ceramic design via shape control. J Optim Theory Appl 983-1001 · Zbl 1322.49070
[6] Bolten, M.; Gottschalk, H.; Hahn, C.; Saadi, M., Numerical shape optimization to decrease failure probability of ceramic structures, Comput Visualization Sci (2019)
[7] Braess, D., Finite elements. Theory, fast solvers, and applications in solid mechanics (1997), Cambridge: Cambridge University Press, Cambridge · Zbl 0894.65054
[8] Brückner-Foit, A.; Fett, T.; Munz, D.; Schirmer, K., Discrimination of multiaxiality criteria with the Brasilian disk test, J Eur Ceram Soc, 17, 689-696 (1997)
[9] Bucur, D.; Buttazzo, G., Variational methods in shape optimization problems (2005), Boston: Birkhäuser, Boston · Zbl 1117.49001
[10] Chenais, D., On the existence of a solution in a domain identification problem, J Math Anal Appl, 52, 189-289 (1975) · Zbl 0317.49005
[11] Chirkov, D.; Ankudinova, A.; Kryukov, A.; Cherny, S.; Skorospelov, V., Multi-objective shape optimization of a hydraulic turbine runner using efficiency, strength and weight criteria, Struct Multidiscip Optim, 58, 627-640 (2018)
[12] Conti, S.; Held, H.; Pach, M.; Rumpf, M.; Schultz, R., Shape optimization under uncertainty - a stochastic programming perspective, SIAM J Optim, 19, 4, 1610-1632 (2008) · Zbl 1176.49045
[13] Das, I.; Dennis, JE, A closer look at drawbacks of minimizing weighted sums of objectives for Pareto set generation in multicriteria optimization problems, Struct Optim, 14, 1, 63-69 (1997)
[14] Deb, K., Multi-objective optimization using evolutionary algorithms (2001), Chichester: Wiley, Chichester · Zbl 0970.90091
[15] Deb K, Goel T (2002) Multi-objective evolutionary algorithms for engineering shape design. In: Evolutionary optimization, vol 48. International Series in Operations Research & Management Science. Springer, Boston, MA, pp 147-175
[16] Delfour, M.; Zolésio, JP, Shape and geometries: analysis, differential calculus, and optimization (2011), Philadelphia: SIAM, Philadelphia
[17] Désidéri JA (2009) Multiple-gradient descent algorithm (MGDA). Research Report 00389811, INRIA. https://hal.inria.fr/inria-00389811 · Zbl 1241.65057
[18] Désidéri, JA, Multiple-gradient descent algorithm (MGDA) for multiobjective optimization, CR Math, 350, 313-318 (2012) · Zbl 1241.65057
[19] Duran, RG; Muschietti, MA, The Korn inequality for Jones domains, Electron J Differ Equ, 127, 1-10 (2004) · Zbl 1134.35396
[20] Duysinx, P.; Bendsœ, M., Topology optimization of continuum structures with local stress constraints, Int J Numer Methods Eng, 43, 8, 1453-1478 (1998) · Zbl 0924.73158
[21] Ehrgott, M., Multicriteria Optimization (2005), Berlin: Springer, Berlin
[22] Eppler K (2017) On Hadamard shape gradient representations in linear elasticity. Unpublished manuscript
[23] Eppler, K.; Harbrecht, H.; Schneider, R., On convergence in elliptic shape optimization, SIAM J Control Optim, 45, 61-83 (2007) · Zbl 1354.49093
[24] Fliege, J.; Svaiter, BF, Steepest descent methods for multicriteria optimization, Math Methods Oper Res, 51, 3, 479-494 (2000) · Zbl 1054.90067
[25] Fliege J, Vaz A, Vicente L (2018) Complexity of gradient descent for multiobjective optimization. Optim Methods Softw. 10.1080/10556788.2018.1510928 To appear · Zbl 1429.90067
[26] Fujii, N., Lower semicontinuity in domain optimization problems, J Optim Theory Appl, 59, 407-422 (1988) · Zbl 0629.49006
[27] Giacomini M, Désidéri JA, Duvigneau R (2014) Comparison of multiobjective gradient-based methods for structural shape optimization. Tech. Rep. RR-8511, INRIA
[28] Gottschalk, H.; Saadi, M., Shape gradients for the failure probability of a mechanical component under cyclical loading, Comput Mech, 4, 1-21 (2019)
[29] Gottschalk, H.; Schmitz, S., Optimal reliability in design for fatigue life, SIAM J Control Optim, 52, 5, 2727-2752 (2015) · Zbl 1307.49041
[30] Gottschalk H, Saadi M, Doganay O, Klamroth K, Schmitz S (2018) Adjoint method to calculate the shape gradients of failure probabilities for turbomachinery components. ASME TURBO-Expo GT2018-75759
[31] Gross, D.; Seelig, T., Fracture mechanics. With an introduction to micromechanics (2006), Berlin: Springer, Berlin · Zbl 1110.74001
[32] Haslinger, J.; Mäkinen, RAE, Introduction to shape optimization (2003), Philadelphia: SIAM, Philadelphia
[33] Kallenberg, O., Random measures (1983), Berlin: Akademie-Verlag, Berlin
[34] Laurain, A.; Sturm, K., Distributed shape derivative via averaged adjoint method and applications, ESAIM Math Model Numer Anal, 50, 4, 1241-1267 (2016) · Zbl 1347.49070
[35] Michor, PW; Mumford, D., Riemannian geometries on spaces of planar curves, J Eur Math Soc, 8, 1-48 (2006) · Zbl 1101.58005
[36] Miettinen, K., Nonlinear multiobjective optimization (1999), Boston: Kluwer Academic Publishers, Boston · Zbl 0949.90082
[37] Morell R (2004) Brevier technical ceramics. Tech. rep., Verband der Keramischen Industrie e.V, Information Center Technical Ceramics. http://www.keramverband.de/brevier_engl/brevier.htm
[38] Munz, D.; Fett, T., Ceramics—mechanical properties, failure behaviour, materials selection (2001), Berlin: Springer, Berlin
[39] Picelli, R.; Townsend, S.; Brampton, C.; Noratoc, J.; Kimad, HA, Stress-based shape and topology optimization with the level set method, Comput Methods Appl Mech Eng, 329, 1-23 (2018) · Zbl 1439.74294
[40] Piegl, L.; Tiller, W., The NURBS book. Monographs in visual communication (2000), Berlin: Springer, Berlin
[41] Pulliam T, Nemec M, Holst T, Zingg D (2003) Comparison of evolutionary (genetic) algorithm and adjoint methods for multi-objective viscous airfoil optimization. In: 41st Aerospace science meeting and exhibit, 6-9 January 2003, Reno, Nevada, no. 2003-0298 in AIAA Paper
[42] Roudi, S.; Riesch-Oppermann, H.; Kraft, O., Advanced probabilistic tools for the uncertainty assessment in failure and lifetime prediction of ceramic components, Materialwissenschaften u. Werkstofftechnik, 36, 171-176 (2005)
[43] Schandl, B.; Klamroth, K.; Wiecek, M., Norm-based approximation in multicriteria programming, Comput Math Appl, 44, 925-942 (2002) · Zbl 1047.90062
[44] Schmitz S (2014) A local and probabilistic model for low-cycle fatigue.: new aspects of structural analysis. Hartung-Gorre,
[45] Schmitz, S.; Beck, T.; Krause, R.; Rollmann, G.; Seibel, T.; Gottschalk, H., A probabilistic model for LCF, Comput Mater Sci, 79, 584-590 (2013)
[46] Schmitz S, Seibel T, Gottschalk H, Beck T, Rollmann G, Krause R (2013b) Probabilistic analysis of the LCF crack initiation life for a turbine blade under thermo-mechanical loading. Proc. Int. Conf LCF 7
[47] Schulz, V., A Riemannian view on shape optimization, Foundations of Computational Mathematics, 14, 3, 483-501 (2014) · Zbl 1296.49037
[48] Schulz, V., Efficient PDE constrained shape optimization based on Steklov-Poincaré-type metrics, SIAM J Optim, 26, 4, 2800-2819 (2016) · Zbl 1354.49095
[49] Shackelford J, Alexander W (eds) (2015) CRC materials science and engineering handbook, 4th edn. CRC Press LLC
[50] Sokolovski, J.; Zolesio, JP, Introduction to shape optimization—shape sensitivity analysis (1992), Berlin: Springer, Berlin
[51] Watanabe S (1964) On discontinuous additive functionals and Lévy measures of a Markov process. Jpn J Math 34 · Zbl 0141.15703
[52] Weibull, E., A statistical theory of the strength of materials, Ingeniörsvetenskapsakedemiens Handlingar, 151, 1-45 (1939)
[53] Zavala, G.; Nebro, A.; Luna, F.; Coello Coello, C., A survey of multi-objective metaheuristics applied to structural optimization, Struct Multidiscip Optim, 49, 537-558 (2014)
[54] Zerbinati, A.; Minelli, A.; Ghalane, I.; Désidéri, J., Meta-model-assisted MGDA for multi-objective functional optimization, Comput Fluids, 102, 116-130 (2014) · Zbl 1390.74164
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.