[1] |
K. M. Lee and D. Shah, “Kinematic analysis of three degree of freedom in-parallel actuated manipulator,” in Proceedings of the IEEE International Conference on Robotics and Automation, vol. 4, pp. 354-360, Raleigh, NC, USA, 1987. |

[2] |
K. M. Lee and D. Shah, “Dynamic analysis of three degree of freedom in-parallel actuated manipulator,” in Proceedings of the IEEE International Conference on Robotics and Automation, vol. 4, pp. 361-367, Raleigh, NC, USA, 1988. |

[3] |
Q. Xu and Y. Li, “An investigation on mobility and stiffness of a 3-DOF translational parallel manipulator via screw theory,” Robotics and Computer-Integrated Manufacturing, vol. 24, no. 3, pp. 402-414, 2008.
· doi:10.1016/j.rcim.2007.02.022 |

[4] |
Y. Fang and Z. Huang, “Kinematic analysis of 3RPS parallel robotic mechanisms,” Mechanical Science and Technology, vol. 16, no. 1, pp. 82-87, 1997. |

[5] |
Y. Li and Q. Xu, “Kinematics and inverse dynamics analysis for a general 3-PRS spatial parallel mechanism,” Robotica, vol. 23, no. 2, pp. 219-229, 2005.
· doi:10.1017/S0263574704000797 |

[6] |
Y. Li and Q. Xu, “Kinematic analysis of a 3-PRS parallel manipulator,” Robotics and Computer-Integrated Manufacturing, vol. 23, no. 4, pp. 395-408, 2007.
· doi:10.1016/j.rcim.2006.04.007 |

[7] |
J. Y. S. Luh, M. W. Walker, and R. P. C. Paul, “Resolved-acceleration control of mechanical manipulators,” IEEE Transactions on Automatic Control, vol. 25, no. 3, pp. 468-474, 1980. · Zbl 0436.93026
· doi:10.1109/TAC.1980.1102367 |

[8] |
S.-L. Wu and S.-K. Lin, “Implementation of damped-rate resolved-acceleration robot control,” Control Engineering Practice, vol. 5, no. 6, pp. 791-800, 1997.
· doi:10.1016/S0967-0661(97)00063-4 |

[9] |
R. Campa, R. Kelly, and E. García, “On stability of the resolved acceleration control,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA ’01), pp. 3523-3528, May 2001. |

[10] |
J. Kennedy and R. Eberhart, “Particle swarm optimization,” in Proceedings of the IEEE International Conference on Neural Networks, pp. 1942-1948, IEEE, December 1995. |

[11] |
R. C. Eberhart and J. Kennedy, “A new optimizer using particle swarm theory,” in Proceedings of the 6th International Symposium on Micromachine and Human Science, pp. 39-43, Nagoya, Japan, 1995. |

[12] |
J. Kennedy, “Particle swarm: social adaptation of knowledge,” in Proceedings of the 1997 IEEE International Conference on Evolutionary Computation (ICEC ’97), pp. 303-308, April 1997. |

[13] |
S. Naka, T. Genji, T. Yura, and Y. Fukuyama, “A hybrid particle swarm optimization for distribution state estimation,” IEEE Transactions on Power Systems, vol. 18, no. 1, pp. 60-68, 2003.
· doi:10.1109/TPWRS.2002.807051 |

[14] |
Y. Shi and R. C. Eberhart, “Empirical study of particle swarm optimization,” in Proceedings of the IEEE Congress on Evolutionary Computation, pp. 1945-1950, IEEE, 1999. |

[15] |
X. Chen and Y. Li, “A modified PSO structure resulting in high exploration ability with convergence guaranteed,” IEEE Transactions on Systems, Man, and Cybernetics, Part B, vol. 37, no. 5, pp. 1271-1289, 2007.
· doi:10.1109/TSMCB.2007.897922 |

[16] |
C. H. Liu and S. Cheng, “Direct singular positions of 3RPS parallel manipulators,” Journal of Mechanical Design, vol. 126, no. 6, pp. 1006-1016, 2004.
· doi:10.1115/1.1803851 |

[17] |
T.-S. Hwang and M.-Y. Liao, “Optimal mechanism design and dynamic analysis of a 3-leg 6-DOF linear motor based parallel manipulator,” Asian Journal of Control, vol. 6, no. 1, pp. 136-144, 2004. |

[18] |
S. A. Joshi and L.-W. Tsai, “Jacobian analysis of limited-DOF parallel manipulators,” Journal of Mechanical Design, vol. 124, no. 2, pp. 254-258, 2002.
· doi:10.1115/1.1469549 |

[19] |
C. C. Kao, S. L. Wu, and R. F. Fung, “The 3RPS parallel manipulator motion control in the neighborhood of singularities,” in Proceedings of the International Symposium on Industrial Electronics, Mechatronics and Applications, vol. 1, pp. 165-179, 2007. |

[20] |
W.-M. Lin, F.-S. Cheng, and M.-T. Tsay, “Nonconvex economic dispatch by integrated artificial intelligence,” IEEE Transactions on Power Systems, vol. 16, no. 2, pp. 307-311, 2001.
· doi:10.1109/59.918303 |

[21] |
W.-M. Lin, F.-S. Cheng, and M.-T. Tsay, “An improved tabu search for economic dispatch with multiple minima,” IEEE Transactions on Power Systems, vol. 17, no. 1, pp. 108-112, 2002.
· doi:10.1109/59.982200 |

[22] |
A. A. Maciejewski and C. A. Klein, “Singular value decomposition. Computation and applications to robotics,” International Journal of Robotics Research, vol. 8, no. 6, pp. 63-79, 1989. |

[23] |
J. T. Wen and J. F. O’Brien, “Singularities in three-legged platform-type parallel mechanisms,” IEEE Transactions on Robotics and Automation, vol. 19, no. 4, pp. 720-726, 2003.
· doi:10.1109/TRA.2003.814518 |

[24] |
K. W. Spring, “Euler parameters and the use of quaternion algebra in the manipulation of finite rotations: a review,” Mechanism and Machine Theory, vol. 21, no. 5, pp. 365-373, 1986. |