×

Mechanical and thermal properties of stainless steel parts, manufactured by various technologies, in relation to their microstructure. (English) Zbl 07314424

Summary: This work provides comparative analysis of the effect of manufacturing processes and process parameters on mechanical and thermal properties of stainless steel 316L. The properties are compared for the parts produced by additive manufacturing (Selected Laser Melting), thermal spraying, casting, hot/cold rolling, hot-isostatic pressing, and forging technologies. Each of these manufacturing processes leads to formation of its own microstructure formed by pores and cracks of different shape and orientation, as well as by dislocations and grain boundaries. A comprehensive analysis of the data available in literature is supplemented by our measurements of the mechanical properties of hot rolled and 3D printed samples.

MSC:

74-XX Mechanics of deformable solids
78-XX Optics, electromagnetic theory
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Aging and Material Reliability Evaluation Group, (2012). Project of Integrity Assessment of Flawed Components with Structural Discontinuity (IAF) Material Properties Data Book at High Temperature for Dissimilar Metal Welding in Reactor Pressure Vessel, pp. Appendix 1 39-41, Japan Nuclear Energy Safety Organization, Minatoku, Tokyo.
[2] Al-Mangour, B.; Mongrain, R.; Irissou, E.; Yue, S., Improving the strength and corrosion resistance of 316L stainless steel for biomedical applications using cold spray, Surface & Coatings Technology, 216, 297-307 (2013)
[3] Al-Mangour, B., Effect of heat treatment on the microstructure and mechanical properties of stainless steel 316L coatings produced by cold spray for biomedical applications, J, Therm. Spray Technol., 23, 2014, 641-652 (2014)
[4] Alsalla, H. H.; Smith, C.; Hao, L., Effect of build orientation on the surface quality, microstructure and mechanical properties of selective laser melting 316L stainless steel, Rapid Prototyping Journal, 24, 1, 9-17 (2018)
[5] Anisimova, M.; Knyazeva, A.; Sevostianov, I., Evolution of the effective elastic properties of metal matrix composites during the synthesis, International Journal of Engineering Sciences, 153, Article 103307 pp. (2020) · Zbl 07228649
[6] A.S. for Metals, Metals handbook, Properties and Selection: Stainless Steels, Tool Materials and Special-Purpose Metals, 3, 113-114 (1978), American Society for Metals, 9t1978
[7] ASTM International 2013. Standard Test Methods for Determining Average Grain Size, ASTM International E112-13, West Conshohocken.
[8] ASTM International 2014. ASTM Committee on Additive Manufacturing Technologies Continues Development of New Standards. Source: https://www.astm.org/cms/drupal-7.51/newsroom/astm-committee-additive-manufacturing-technologies-continues-development-new-standards, viewed on April 21, 2020.
[9] ASTM International, 2015. Standard practice for microetching metals and alloys, ASTM International E407-07, West Conshohocken, 2015.
[10] ASTM - Designation: E8/E8M - 13a, Standard Test Methods for Tension of Metallic Materials (2016), ASTM International
[11] ASTM International, 2017. Standard Specification for Super strength Alloy Steel Forgings, A579/A579M-17a. ASTM International - Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service. source: https://compass.astm.org/download/A182A182M.36428.pdf
[12] Azarmi, F.; Coyle, T. W.; Mostaghimi, J., Optimization of Atmospheric Plasma Spray Process Parameters using a Design of Experiment for Alloy 625 Coatings, Journal of Thermal Spray Technology, 17, 1, 144-155 (2008)
[13] AZoM paper, (2004). Stainless Steel - Grade 316L - Properties, Fabrication and Applications (UNS S31603). Source: https://www.azom.com/article.aspx?ArticleID=2382 viewed on June 21, 2020.
[14] Brochard, L.; Honório, T., Revisiting thermo-poro-mechanics under adsorption: Formulation without assuming Gibbs-Duhem equation, International Journal of Engineering Science, 152, Article 103296 pp. (2020) · Zbl 07205506
[15] Busby, J. T., Development of high performance cast stainless steels for ITER shield module applications, J, Nucl. Mater., 417, 1-3, 866-869 (2011)
[16] Butusova, Ye. N.; Mishakin, V. V.; Kachanov, M., On monitoring the incubation stage of stress corrosion cracking in steel by the eddy current method, International Journal of Engineering Science, 148, Article 103212 pp. (2020) · Zbl 07167847
[17] Callister, W. D., Materials science and engineering: an introduction (2010), John Wiley & Sons: John Wiley & Sons Hoboken, NJ
[18] Carlton, H.; Haboub, A.; Gallegos, G.; Parkinson, D.; MacDowell, A., Damage evolution and failure mechanisms in additively manufactured stainless steel, Mater. Sci. Eng. A, 651, 406-414 (2016)
[19] Casati, R.; Lemke, J.; Vedani, M., Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting, Journal of Materials Science & Technology, 32.8, 738-744 (2016)
[20] CES EduPack (2018). Materials Science and Engineering (MS&E) Package, Cambridge, UK.
[21] Chen, F.; Sevostianov, I.; Giraud, A.; Grgic, D., Evaluation of the effective elastic and conductive properties of a material containing concave pores, Int. J. Eng. Sci., 97, 60-68 (2015) · Zbl 1423.74262
[22] Chen, F.; Sevostianov, I.; Giraud, A.; Grgic, D., Combined effect of pores concavity and aspect ratio on the elastic properties of a porous material, Int. J. Solids Struct., 134, 161-172 (2018), March
[23] Cortes, R., Effect of processing conditions on the mechanical performance of stainless steel cold sprayed coatings, Surface & Coatings Technology, 394, 2020, Article 125874 pp. (2020)
[24] Da Silva, M. G.; Ramesh, K. T., The rate-dependent deformation and localization of fully dense and porous Ti-6Al-4V, Material Science and Engineering A, 232, 11-22 (1997)
[25] Da Silva, M. G.; Ramesh, K. T., The rate-dependent deformations of porous pure iron, The International Journal of Plasticity, 13, 587-610 (1997) · Zbl 0900.73179
[26] Dalle, F., Conventional Austenitic Steels as out of core materials for generation IV nuclear reactors, Structural Materials for Generation IV Nuclear Reactors (2017), Elsevier Ltd
[27] Delgado, J.; Ciurana, J.; Rodrıguez, C. A., Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials, International Journal of Advanced Manufacturing Technology, 60, 5-8, 601-610 (2012)
[28] Dikici, B.; Yilmazer, H.; Ozdemir, I.; Isik, M., The Effect of Post-Heat Treatment on Microstructure of 316L Cold-Sprayed Coatings and Their Corrosion Performance, Journal of Thermal Spray Technology, 25, 4, 704 (2016)
[29] Du, K.; Cheng, L.; Barthelemy, J. F.; Sevostianov, I.; Giraud, A.; Adessina, A., Numerical estimation of contribution tensor for concave pore embedded in a transversely isotropic matrix, International Journal of Engineering Sciences, 152, Article 103306 pp. (2020) · Zbl 07205507
[30] El-Hadad, S.; Khalifa, W.; Nofal, A., Surface modification of investment cast-316L implants: Microstructure effects, Materials Science and Engineering C, 48, 2015, 320-327 (2015)
[31] Essa, K., Porosity control in 316L stainless steel using cold and hot-isostatic pressing, Materials and Design, 138, 21-29 (2018)
[32] Fadida, R.; Shirizly, A.; Rittel, D., The static and dynamic shear-tension mechanical response of AM Ti6Al4V containing spherical and prolate voids, International Journal of Engineering Science, 141, 2019, 1-15 (2019)
[33] Faini, F.; Attanasio, A.; Ceretti, E., Experimental and FE Analysis of Void Closure in Hot Rolling of Stainless Steel, Journal of Materials Processing Technology, 259, 235-242 (2018)
[34] Fousová, M., 3D Printing as an Alternative to Casting, Forging and Machining Technologies?, Manufacturing Technology 2015, 15, 5, 809-814 (2015)
[35] Frodal, B. H.; Christiansen, E.; Myhr, O. R.; Hopperstad, O. S., The role of quench rate on the plastic flow and fracture of three aluminium alloys with different grain structure and texture, International Journal of Engineering Science, 150, 2020, Article 103257 pp. (2020) · Zbl 07205488
[36] Galedari, S.; Mahdavi, A.; Azarmi, F.; Huang, Y.; McDonald, A., A Comprehensive Review of Corrosion Resistance of Thermally-Sprayed and Thermally-Diffused Protective Coatings on Steel Structures, Journal of Thermal Spray Technology, Vol, 28, 645-677 (2019)
[37] Gibbs, T. W.; Wyatt, H. W., Short Time Properties of Type 316 Stainless Steel at Very High Temperatures, Paper No. 60-WA-11, Trans. ASME, J. Basic Eng. (1960)
[38] Hamidi, M. F.F. A.; Harun, W. S.W.; Khalil, N. Z.; Samykano, M., Microstructural comparison and mechanical properties of stainless steel 316L fabricated by selective laser melting and metal injection moulding processes, Int. J. Manufacturing Technology and Management, 33, 1/2 (2019), Nos2019
[39] Hitzler, L.; Hirsch, J.; Heine, B., On the Anisotropic Mechanical Properties of Selective Laser Melted Stainless Steel, Materials, 10, 1136 (2017)
[40] Hofmeister, W.; Griffith, M.; Ensz, M.; Smugeresky, J., Solidification in direct metal deposition by LENS processing, JOM, 53, 30-34 (2001)
[41] Horii, H.; Nemat-Nesser, S., Overall moduli of solids with microcracks: load-induced anisotropy, J. Mech. Phys. Solids, 31, 155-171 (1983) · Zbl 0506.73097
[42] Huang, R.; Sone, M.; Ma, W.; Fukanuma, H., The effects of heat treatment on the mechanical properties of cold-sprayed coatings, Surf. Coat. Technol., 261, 2015, 278-288 (2015)
[43] Kachanov, M.; Tsukrov, I.; Shafiro, B., Effective moduli of solids with cavities of various shapes, Appl. Mech. Rev., 47, S151-S174 (1994)
[44] Kee, A.; Matic, P.; Everett, R. K., A mesoscale computer simulation of multiaxial yield in GASAR porous copper, Material Science and Engineering A, 249, 30-39 (1998)
[45] Keller, D.A. (1972). Progress on LMFBR Cladding, Structural and Component Material Studies During July 1971 through June 1972. BMI-1928, Final Report, Task 32, Battelle Columbus.
[46] Kim, C. S. (1975). Thermophysical Properties of Stainless Steel. U.S. Energy Research and Development Administration, Chemical Engineering Laboratory.
[47] Kong, D., Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes, The International Journal of Advanced Manufacturing Technology, 107, 2020, 109-122 (2019)
[48] Kowalczyk-Gajewska, K.; Maździarz, M., Effective stiffness tensor of nanocrystalline materials of cubic symmetry: The core-shell model and atomistic estimates, International Journal of Engineering Science, 144, 2019, Article 103134 pp. (2019) · Zbl 07130160
[49] Kurzynowski, T.; Gruber, K.; Stopyra, W., Correlation between process parameters, microstructure and properties of316 L stainless steel processed by selective laser melting, Materials Science & Engineering A, 718, 64-73 (2018)
[50] La, P., Effect of Annealing Temperature on Microstructure and Mechanical Properties of Bulk 316L Stainless Steel with Nano- and Micro-crystalline Dual Phases, Metallurgical and Materials Transactions A, 45A, 5236 (2014), October, 2014
[51] Ledbetter, H. M., Stainless-steel elastic constants at low temperatures, J. Appl. Phys., 52, 3, 1587-1589 (1981), 1981
[52] Lind, A.; Sundström, J.; Peacock, A., The effect of reduced oxygen content powder on the impact toughness of 316 steel powder joined to 316 steel by low temperature HIP, Fusion Engineering and Design, 75-79, 979-983 (2005)
[53] Lindstedt, U.; Karlsson, B., Microstructure and Mechanical Behaviour of Single Pressed and Vacuum Sintered Gas and Water Atomised 316L Stainless Steel Powders, Powder Metallurgy, 41, 4, 261-268 (1998)
[54] Liverani, E.; Lutey, A. H.A. S.; Ascari, A.; Fortunato, A., The effects of hot isostatic pressing (HIP) and solubilization heat treatment on the density, mechanical properties, and microstructure of austenitic stainless steel parts produced by selective laser melting (SLM), The International Journal of Advanced Manufacturing Technology, 107, 2020, 109-122 (2020)
[55] Liverani, E.; Toschi, S.; Ceschini, L.; Fortunato, A., Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel, J. Mater. Process. Technol., 249, 255-263 (2017)
[56] Luo, J., 316L Stainless Steel Manufactured by Selective Laser Melting and Its Biocompatibility with or without Hydroxyapatite Coating, Metals, 8, 7, 548 (2018)
[57] Ma, M.; Wang, Z.; Xiaoyan, Z., A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition, Materials Science and Engineering A, 685, 265-273 (2017)
[58] Ma, M.; Wang, Z.; Zeng, X., A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition, Materials Science and Engineering A, 685, 265-273 (2017)
[59] Marbury, F., Characterization of SLM Printed 316L Stainless Steel and Investigation of Micro lattice geometry (2017), Polytechnic State University: Polytechnic State University California
[60] Markov, A.; Trofimov, A.; Abaimov, S.; Akhatov, I., On the applicability of replacement relations to tetrahedron-like inhomogeneities, Int. J. Solids Struct., 167, 1-13 (2019), August
[61] Mishakin, V. V.; Klyushnikov, V. A.; Gonchar, A. V.; Kachanov, M., On assessing damage in austenitic steel based on combination of the acoustic and eddy current monitoring, International Journal of Engineering Science, 135, 2019, 17-22 (2019)
[62] Moshref-Javadi, M.; Edris, H.; Shafyei, A.; Salimi-Jazi, H., Diffusion behavior of hydrogen through thermally sprayed coating of 316L stainless steel, International Journal of Hydrogen Energy, 42, 9, 6409-6419 (2017), 2 March 2017https://doi.org/
[63] Mower, T. M.; Long, M. J., Mechanical behavior of additive manufactured, powder bed laser-fused materials, Mater. Sci. Eng. A, 651, 198-213 (2016)
[64] Nastac, M.; Klein, R. L.A., Microstructure and Mechanical Properties Comparison of 316L Parts produced by Different Additive Manufacturing Processes, (Solid Freeform Fabrication 2017: Proceedings of the 28^th Annual International Solid Freeform fabrication Symposium - An Additive Manufacturing Conference (2017)), Source
[65] Natali, S.; Brotzu, A.; Pilone, D., Comparison between Mechanical Properties and Structures of a Rolled and a 3D-Printed Stainless Steel, Matrials, 12, 3867 (2019), of 316L Stainless Steel produced by Selective Laser Melting.,” 27th Annual Solid Freeform
[66] (Olson, D. L.; Siewert, T. A.; Liu, S.; Edwards, G. R., ASM Handbook Volume 06: Welding, Brazing, and Soldering (1993), ASM International), 496, ISBN: 978-0-87170-382-8
[67] Peckner, D.; Bernstein, I., Handbook of Stainless Steel (1987), McGraw Hill
[68] Peng, J., Estimation of mechanical strength for pre-strained 316L austenitic stainless steel by small punch test, Vacuum, 160, 37-53 (2019)
[69] Penn, R., 3D printing of 316l stainless steel and its effect on microstructure and mechanical properties, 3D printing of 316l stainless steel and its effect on microstructure and mechanical properties, 140 (2017)
[70] Petch, N. J., The Cleavage Strength of Polycrystals, J. Iron Steel Inst. London, 173, 25-28 (1953)
[71] Piatti, G.; Schiller, P., Thermal and Mechanical Properties of the Cr-Mn-(Ni-free) Austenitic Steels for Fusion Reactor Applications, Journal of Nuclear Materials, 417-426 (1986)
[72] Prashanth, K. G.; Eckert, J., Formation of metastable cellular microstructures in selective laser melted alloys, Journal of Alloys and Compounds, 707, 27-34 (2017)
[73] Prosaic Steel and Alloys, Mumbai, Maharashtra, India https://www.prosaicsteel.com/astm-a276-ss-316l-round-bars-supplier-exporter.html#mechanical
[74] Qin, W., Effects of grain size on tensile property and fracture morphology of 316L stainless steel, Materials Letters, 254, 116-119 (2019)
[75] Reed-Hill, Robert E., Physical metallurgy principles (2009), Cengage Learning
[76] Riemer, A.; Leuder, S.; Thöne, On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting, Eng. Fract. Mech., 120, 2014, 15-25 (2014)
[77] Röttger, A.; Boes, J.; Theisen, W., Microstructure and mechanical properties of 316L austenitic stainless steel processed by different SLM devices, Int. J. Adv. Manuf. Technol. (2020)
[78] Röttger, A., Geenen, K., Windmann, M., Binner, F., Theisen, W. (2016). Comparison of microstructure and mechanical properties of 316L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material, Materials Science & Engineering A 678, 365 - 376. DOI: http://dx.doi.org/ 10.1016/j.msea.2016.10.012
[79] Saeidi, K., Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting, Journal of Alloys and Compounds, 633, 463-469 (2015)
[80] Saeidi, K.; Gao, X.; Shen, Z., Hardened austenite steel with columnar sub-grain structure formed by laser melting, Materials Science & Engineering A, 625, 221-229 (2015)
[81] Sevostianov, I.; Kachanov, M., Local minima and gradients of stiffness and conductivity as indicators of strength reduction of brittle-elastic materials, International Journal of Fracture, 164, 2010, 147-154 (2010) · Zbl 1273.74482
[82] Sevostianov, I.; Kachanov, M., Elastic and conductive properties of plasma-sprayed ceramic coatings in relation to their microstructure – an overview, Journal of Thermal Spray Technology, 18, 2009, 822-834 (2009)
[83] Sevostianov, I.; Kachanov, M., Connections between elastic and conductive properties of heterogeneous materials, (Giessen, E.van der; Aref, H., Advances in Applied Mechanics, 42 (2009), Academic Press), 69-252, 2009
[84] Sevostianov, I.; Kachanov, M., On the yield condition for anisotropic porous materials, Materials Science and Engineering A, 313, 1-15 (2001) · Zbl 0967.74050
[85] Sevostianov, I.; Kachanov, M.; Zohdi, T., On computation of the compliance and stiffness contribution tensors of inhomogeneities, Int. J. Solids Struct., 45, 4375-4383 (2008) · Zbl 1169.74361
[86] Sevostianov, I.; Kachanov, M., Compliance tensor of ellipsoidal inclusion, Int. J. Fracture, 96, L3-L7 (1999)
[87] Sevostianov, I.; Kachanov, M., Explicit cross-property correlations for anisotropic two-phase composite materials, J. Mech. Phys. Solids, 50, 253-282 (2002) · Zbl 1008.74003
[88] Sevostianov, I.; Chen, F.; Giraud, A.; Grgic, D., Compliance and resistivity contribution tensors of axisymmetric concave pores, Int. J. Eng. Sci., 101, 14-28 (2016) · Zbl 1423.74802
[89] Sevostianov, I.; Kachanov, M., Plastic yield surfaces of anisotropic porous materials in terms of electric conductivities, Mechanics of Materials, 38, 908-923 (2006)
[90] Shankar, P., Nitrogen redistribution, microstructure, and elastic constant evaluation using ultrasonics in aged 316LN stainless steels, Metall and Mat Trans A, 32, 2001, 2959-2968 (2001)
[91] Sharma, N. K.; Shekhar, S., Microstructure and Property Evaluation of Hot-rolled and Cold-rolled Austenitic Stainless Steel 316L, 70, 1277-1284 (2017), Transaction of Indian Institute of Metals
[92] Sheinerman, A. G.; Castro, R. H.R.; Gutkin, M. Yu, A model for direct and inverse Hall-Petch relation for nanocrystalline ceramics, Materials Letters, 260, Article 126886 pp. (2020)
[93] Shifeng, W., Effect of molten pool boundaries on the mechanical properties of selective laser melting parts, J. Mater. Process. Technol., 214, 2660-2667 (2014)
[94] Shim, H-J., Fabrication and characteristic of the 316L(N)-IG forged block and rolled plate for application to ITER blanket shield block, Fusion Engineering and Design, 156, Article 111738 pp. (2020)
[95] Simmons, J. C.; Daeumer, M. A.; Azizi, A.; Schiffres, S. N., Local Thermal Conductivity Mapping of Selective Laser Melted 316L Stainless Steel, (Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference (2018))
[96] Simmons, J. C., Influence of processing and microstructure on the local and bulk thermal conductivity of selective laser melted 316L stainless steel, Additive Manufacturing, 32 (2020)
[97] Sistiaga, M. L. M., Nardone, S., Hautfenne, C., Humbeeck, J. V. (2016). “Effect of Heat Treatment
[98] Song, R.; Xiang, J.; Hou, D., Characteristics of Mechanical Properties and Microstructure for 316L Austenitic Stainless Steel, Journal of Iron and Steel Research, International, 18, 11, 53-59 (2011)
[99] Spencer, K.; Zhang, M.-X., Optimisation of stainless steel cold spray coatings using mixed particle size distributions, Surf. Coat. Technol., 205, 2011, 5135-5140 (2011)
[100] Supplement 8, High Alloy Data Sheets Corrosion Series (2004), Steel Founders Society of America
[101] Sun, J., Study of Microstructure and Properties of 316L with Selective Laser Melting Based on Multivariate Interaction Influence, Advances in Materials Science and Engineering., 2020, Article 8404052 pp. (2020), Article IDhttps://doi.org/
[102] Sundararajan, G., The influence of heat treatment on the microstructural, mechanical and corrosion behaviour of cold sprayed SS 316L coatings, J Mater Sci, 44, 2320-2326 (2009)
[103] Sundararajan, G.; Chavan, N. M.; Kumar, S., The Elastic Modulus of Cold Spray Coatings: Influence of Inter-splat Boundary Cracking, Journal or Thermal Spray Technology, 22, 8, 1348 (2013)
[104] Suryawanshi, J.; Prashnath, K. G.; Rammurty, U., Mechanical behavior of selective laser melted 316L stainless steel, Materials Science & Engineering A, 696, 113-121 (2017)
[105] Universal Casting Corporation (Maharashtra, India), manufacturer of: Ferrous & Non Ferrous Castings: http://www.universalcastingcorp.com/stainless-steel-casting.html viewed on June 23, 2020.
[106] Wang, D.; Song, C.; Yang, Y.; Bai, Y., Investigation of crystal growth mechanism during selective laser meltingand mechanical property characterization of 316L stainless steel parts, Materials and Design, 100, 291-299 (2016)
[107] Wang, Z. C.; Davies, T. J.; Ridley, N.; Ogwu, A. A., Superplasticity of ceramic materials—II. Effect of initial porosity and doping on the superplastic behaviour of alumina, Acta Materialia, 44, 4301-4309 (1996)
[108] Yadroitsev, I.; Smurov, I., Selective laser melting technology: from the single laser melted track stability to 3d parts of complex shape, Phys. Procedia, 5, 551-560 (2010)
[109] Yakout, M.; Elbestawi, M. A.; Veldhuis, S. C., On the characterization of stainless steel 316L parts produced by selective laser melting, Int. J. Adv. Manuf. Technol., 95, 1953-1974 (2018)
[110] Yan, F. K.; Liu, G. Z.; Tao, N. R.; Lu, K., Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles, Acta Materialia, 60, 2012, 1059-1071 (2012)
[111] Yao, H., Microstructure and thermal conductivity of wire-arc sprayed FeCrNbBSiC amorphous coating, Journal of Alloys and Compounds, 788, 514-521 (2019)
[112] Yin, S.; Cizek, J.; Yan, X.; Lupoi, R., Annealing strategies for enhancing mechanical properties of additively manufactured 316L stainless steel deposited by cold spray, Surface & Coatings Technology, 370, 353-361 (2019)
[113] Zhang, B.; Dembinski, L.; Coddet, Ch, The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316 L powder, Mater. Sci. Eng. A, 584, 21-31 (2013)
[114] Zhong, Y., Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting, J. Nucl. Mater., 470, 170-178 (2016)
[115] Zisman, A., Predictive micromechanical model for plastic accommodation and crystallography of martensite embryo, International Journal of Engineering Science, 150, 2020, Article 103245 pp. (2020) · Zbl 07205486
[116] Zohdi, T.; Kachanov, M.; Sevostianov, I., A microscale numerical analysis of a plastic flow in a porous material, International Journal of Plasticity, 18, 1649-1659 (2002) · Zbl 1032.74628
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.