Heat conduction in a plate with two-sided thin multilayer coating under nonstationary heating. (Ukrainian, English) Zbl 1349.74025

Mat. Metody Fiz.-Mekh. Polya 58, No. 2, 148-157 (2015); translation in J. Math. Sci., New York 223, No. 2, 184-197 (2017).
The investigation of this paper is based on the analytical solution of one-dimensional nonstationary problem of heat conductivity for a plate with two-sided thin multilayer coating. The solution is obtained in terms of generalized boundary conditions. The analysis reveals regularities of the heat transfer process in a body coating under heating by ambient media with variable temperature.


74A15 Thermodynamics in solid mechanics
74K20 Plates
74A40 Random materials and composite materials
74F05 Thermal effects in solid mechanics
Full Text: DOI


[1] N. M. Belyaev and A. A. Ryadno, Methods of Nonstationary Heat Conduction [in Russian], Vysshaya Shkola, Moscow (1978). · Zbl 0899.35001
[2] V. B. Veselovskii, Methods for the Numerical Analyses and Investigation of Thermal Processes in Industrial Installations and Technologies [in Russian], Dnipropetrovs’k University, Dnipropetrovs’k (2002).
[3] V. B. Veselovskii, “Solution of the problems of nonstationary heat conduction for multilayer heat-protective coatings,” in: Applied Problems of Air-and-Gas Dynamics [in Russian], Naukova Dumka, Kiev (1987), pp. 95-100.
[4] V. M. Vigak, Optimal Control over Nonstationary Temperature Modes [in Russian], Naukova Dumka, Kiev (1979).
[5] A. P. Gavris’, D. V. Ivashchuk, and P. R. Shevchuk, “Determination of residual stresses in a layered system during two-sided hightemperature spray-coating,” Mat. Met. Fiz.-Mekh. Polya, Issue 29, 8-12 (1989); {\bfEnglish translation:}J. Soviet Math., 65, No. 4, 1715-1719 (1993).
[6] N. O. Hembara, “Effect of a multilayer anticorrosion coating on the thermoelasticity of round plates,” Fiz.-Khim. Mekh. Mater., 49, No. 6, 50-54 (2013); {\bfEnglish translation:}Mater. Sci., 49, No. 6\(,\) 761-767 (2014)\(.\)
[7] L. M. Dyakonyuk and Ya. G. Savula, “Computer modeling of heat transfer in a layer with a thin coating,” Visn. L’viv. Univ. Ser. Mekh.-Mat., Issue 50, 93-95 (1998). · Zbl 0953.65066
[8] D. V. Evdokimov, D. N. Ivasishina, A. A. Kochubei, and N. V. Polyakov, “Analysis of heat conduction in a nonasymptotically thin layer,” in: Differential Equations and Their Application [in Russian], Dnipropetrovs’k National University, Dnipropetrovs’k (2006), pp. 141-156.
[9] R. Zh. Erzhanov, Yu. M. Matsevityi, U. M. Sultangazin, and V. P. Sheryshev, Concentrated Capacity in Problems of Thermal Physics and Microelectronics [in Russian], Naukova Dumka, Kiev (1992).
[10] V. S. Zarubin, Numerical Analyses and Optimization of Thermal Insulation [in Russian], Énergoatomizdat, Moscow (1991).
[11] O. T. Il’chenko, “Temperature field of a two-layered plate with time-varying heat-transfer conditions,” Inzh.-Fiz. Zh., 19, No. 6, 1094-1099 (1970); {\bfEnglish translation:}J. Eng. Phys. Thermophys., 19, No. 6, 1567-1570 (1970).
[12] É. M. Kartashov, Analytic Methods in the Theory of Heat Conduction in Solids [in Russian], Vysshaya Shkola, Moscow (1985).
[13] Yu. A. Kirsanov, “Thermal state of coated solids in asymmetric cyclic heat exchange with ambient media,” Inzh.-Fiz. Zh., 69, No. 1, 123-128 (1996); {\bfEnglish translation:}J. Eng. Phys. Thermophys., 69, No. 1, 104-108 (1996)\(.\)
[14] Yu. M. Kolyano and R. M. Kushnir, “Temperature stresses in plates heated by heat sources with two-sided coatings,” Mat. Met. Fiz.-Mekh. Polya, Issue 11, 72-75 (1980). · Zbl 0438.73005
[15] Komarov, HM, Conditions of conjugation through a thermally thin layer in problems of heat conduction, Dop. Nats. Akad. Nauk Ukr., 7, 26-32, (1996) · Zbl 1030.74501
[16] R. M. Kushnir, B. V. Protsyuk, and V. M. Synyuta, “Temperature stresses and displacements in a multilayer plate with nonlinear conditions of heat exchange,” Fiz.-Khim. Mekh. Mater., 38, No. 6, 31-38 (2002); {\bfEnglish translation:}Mater. Sci., 38, No. 6\(,\) 798-808 (2002)\(.\)
[17] Yo. Yo. Luchko, V. M. Hembara, and N. O. Hembara, “Modeling of thermal conductivity of thin plates with multilayer coatings,” Diagnost. Dovhovich. Rekonstr. Mostiv Budiv. Konstruk., Issue 6, 65-70 (2004).
[18] A.V. Lykov, Analytical Heat Diffusion Theory, Academic Press, New York (1968).
[19] Lyukshin, PA; Lyukshin, BA; Matolygina, NY; Panin, SV, Evaluation of temperature and temperature stresses in multilayer coatings, Mekh. Kompoz. Mater. Konstruk., 16, 563-574, (2010)
[20] B. A. Lyashenko, V. A. Terletskii, N. A. Dolgov, and E. B. Soroka, “Distribution of temperature in a plate with a single-layer coating subjected to intense heating,” Probl. Prochn., No. 3, 128-133 (1998); {\bfEnglish translation:}Strength Mater., 30, No. 3\(,\) 340-344 (1998)\(.\)
[21] Ya. S. Podstrigach and P. R. Shevchuk, “Temperature fields and stresses in bodies with thin coatings,” Tepl. Napryazh. Élem. Konstruk., Issue 7, 227-233 (1967).
[22] Ya. S. Podstrigach, P. R. Shevchuk, and D. V. Ivashchuk, “Effect of thin coatings on the stress-strain state of a layer with a twosided coating in diffusion impregnation,” Fiz.-Khim. Mekh. Mater., 10, No. 1, 74-80 (1974); {\bfEnglish translation:}Mater. Sci., 10, No. 1, 69-74 (1974).
[23] I. M. Prikhod’ko, “Thermal conductivity of a two-layer wall for a time-varying heat-transfer coefficient and ambient temperature,” Inzh.-Fiz. Zh., 18, No. 2, 323-327 (1970); {\bfEnglish translation:}J. Eng. Phys. Thermophys., 18, No. 2, 239-242 (1970).
[24] Ya. G. Savula, “Mathematical model of heat transfer through a three-dimensional body with thin plane coating,” Visn. L’viv. Univ. Ser. Mekh.-Mat., Issue 42, 3-7 (1995).
[25] M. Abramowitz and I. A. Stegun (editors), Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables, US Government Printing Office, Washington (1972). · Zbl 0543.33001
[26] G. N. Tret’yachenko and V. G. Barilo, “Thermal and stressed states of multilayered coatings,” Probl. Prochn., 25, No. 1, 41-49 (1993)\(;\){\bfEnglish translation:}Strength Mater., 25, No. 1, 34-41 (1993)\(.\)
[27] G. N. Tret’yachenko, L. V. Kravchuk, R. I. Kuriat, et al., Thermal Fatigue of Materials under the Conditions of Nonuniform Thermal Stressed State [in Russian], Naukova Dumka, Kiev (1985).
[28] N. P. Fleishman, “Mathematical models of thermal conjugation of media with thin foreign interlayers or coatings,” Visn. L’viv. Univ. Ser. Mekh.-Mat., Issue 39, 30-34 (1993).
[29] Shevchuk, VA, On the construction of the generalized boundary conditions of convective heat exchange with a medium through thin nonplanar coatings, Dop. Nats. Akad. Nauk Ukr., 7, 76-82, (2011)
[30] Al-Nimr, MA; Alkam, MK, A generalized thermal boundary condition, Heat Mass Transf., 33, 157-161, (1997)
[31] Du, F; Lovell, MR; Wu, TW, Boundary-element-method analysis of temperature fields in coated cutting tools, Int. J. Solids Struct., 38, 4557-4570, (2001) · Zbl 0997.74071
[32] Elperin, T; Rudin, G, Temperature field in multilayer assembly affected by a local laser heating, Int. J. Heat Mass Transf., 38, 3143-3147, (1995)
[33] L. M. Heijnen, T. W. Kuijpers, and J. A. Klostermann, “Model description and experiments on carbon diffusion through protective layers,” High Temp.-High Press., 20, No. 3, 305-313 (1988).
[34] Mezin, A; Lepage, J; Abel, PB, An analytical solution for nonsteady-state diffusion through thin films, Thin Solid Films, 272, 124-l31, (1996)
[35] Sarikaya, O; Islamoglu, Y; Celik, E, Finite-element modeling of the effect of the ceramic coatings on heat transfer characteristics in thermal barrier applications, Mater. Design, 26, 357-362, (2005)
[36] V. A. Shevchuk, “Calculation of thermal state of bodies with multilayer coatings,” in: Lecture Notes in Computer Science, Vol. 2330, Springer, Berlin (2002), pp. 500-509. · Zbl 1302.74054
[37] V. A. Shevchuk, “Generalized boundary conditions to solving thermal stress problems for bodies with thin coatings,” in: R. B. Hetnarski (editor), Encyclopedia of Thermal Stresses, Vol. 4, Springer (2014), pp. 1942-1953.
[38] V. A. Shevchuk, “Modeling and computation of heat transfer in a system “body-multilayer coating,” Heat Transf. Res., 37, No. 5, 421-433 (2006). · Zbl 0997.74071
[39] Zhao, J; Li, Y; Ai, X, Analysis of transient thermal stress in sandwich plate with functionally graded coatings, Thin Solid Films, 516, 7581-7587, (2008)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.