×

Accurate analytical approximation to post-buckling of column with Ramberg-Osgood constitutive law. (English) Zbl 1481.74432

Summary: The post-buckling of a clamped column made of nonlinear elastic material and subject to axial compression is investigated in this paper. The Ramberg-Osgood type constitutive relation is adopted and it is expanded by using Taylor series. Based on Euler-Bernoulli beam theory, the exact governing equations are expressed in terms of rotation angle. Because the equations contain strongly nonlinear terms that are functions of the rotation angle, analytical solutions are virtually impossible. In this respect, this paper is focused on presenting an alternative method to construct concise yet accurate analytical approximate solutions for post-buckling of the Ramberg-Osgood column that is related to large rotation amplitude. The improved harmonic balance method is used to solve the nonlinear governing equations which are simplified via the Maclaurin series expansion and orthogonal Chebyshev polynomials. In addition, numerical solutions by applying the shooting method on the governing equations are obtained for comparison. The second-order analytical approximate solutions presented in this paper show excellent accuracy by comparing with numerical solutions. The analytical approximate method and numerical result presented in this paper can be applied as design guidelines for designing engineering structures that sustain large deformation, such as slender nonlinear compression of aluminum alloy columns, rods or braces.

MSC:

74K10 Rods (beams, columns, shafts, arches, rings, etc.)
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Wang, C. Y., Post-buckling of a clamped-simply supported elastica, Int. J. Nonlin. Mech., 32, 6, 1115-1122 (1997) · Zbl 0891.73034
[2] Vaz, M. A.; Silva, D. F.C., Post-buckling analysis of slender elastic rods subjected to terminal forces, Int. J. Nonlin. Mech., 38, 4, 483-492 (2003) · Zbl 1346.74069
[3] Yu, Y. P.; Chen, L. H.; Yu, P.; Sun, W. P., Analytical approximate solution for large post-buckling behavior of a fixed-pinned beam subjected to terminal force with shear force effect, Iran, J. Sci. Technol.-Trans. Civ. Eng., 45, 1, 159-164 (2021)
[4] Bodig, J.; Jayne, B. A., Mechunics of Wood and Wood Composites (1982), Van Nostrand: Van Nostrand New York
[5] Haslach, J.; Henry, W., Post-buckling behavior of columns with non-linear constitutive equations, Int. J. Nonlin. Mech., 20, 1, 53-67 (1985) · Zbl 0553.73038
[6] Szymczak, C.; Mikulski, T., On post-buckling behavior of columns with cubic constitutive equations, Int. J. Nonlin. Mech., 25, 1, 117-121 (1990) · Zbl 0704.73049
[7] Kounadis, A. N.; Mallis, J. G., Elastica type buckling analysis of bars from non-linearly elastic material, Int. J. Nonlin. Mech., 22, 2, 99-107 (1987) · Zbl 0606.73045
[8] Kounadis, A. N.; Mallis, J. G., Two efficient approaches for elastica problem of nonlinear elastic bars, J. Eng. Mech., 113, 5, 766-779 (1987)
[9] Lewis, G.; Monasa, F., Large deflections of cantilever beams of nonlinear materials, Comput. Struct., 14, 5-6, 357-360 (1981)
[10] Lewis, G.; Monasa, F., Large deflections of cantilever beams of non-linear materials of the Ludwick type subjected to an end moment, Int. J. Nonlin. Mech., 17, 1, 1-6 (1982) · Zbl 0487.73058
[11] Brojan, M.; Puksic, A.; Kosel, F., Buckling and post-buckling of a nonlinearly elastic column, ZAMM-Z. Angew. Math. Me., 87, 7, 518-527 (2007) · Zbl 1118.74020
[12] Brojan, M.; Kosel, F., Approximative formula for post-buckling analysis of non-linearly elastic columns with superellipsoidal cross-sections, J. Reinf. Plast. Comp., 30, 5, 409-415 (2011)
[13] Lee, J. K.; Lee, B. K., Generalized second moment of areas of regular polygons for Ludwick type material and its application to cantilever column buckling, Int. J. Struct. Stab. Dy., 19, 2 (2019)
[14] Jung, J. H.; Kang, T. J., Large deflection analysis of fibers with nonlinear elastic properties, Text. Res. J., 75, 10, 715-723 (2005)
[15] Saetiew, W.; Chucheepsakul, S., Post-buckling of simply supported column made of nonlinear elastic materials obeying the generalized Ludwick constitutive law, ZAMM-Z. Angew. Math. Me., 92, 6, 479-489 (2012) · Zbl 1317.74040
[16] Saetiew, W.; Chucheepsakul, S., Post-buckling of linearly tapered column made of nonlinear elastic materials obeying the generalized Ludwick constitutive law, Int. J. Mech. Sci., 65, 1, 83-96 (2012) · Zbl 1317.74040
[17] Zhang, L.; Wang, J.; Zhou, Y.-. H., Large deflection and post-buckling analysis of non-linearly elastic rods by wavelet method, Int. J. Nonlin. Mech., 78, 45-52 (2016)
[18] Ramberg, W.; Osgood, W. R., Description of Stress-Strain Curves By Tree Parameters (1943), National Advisory Committee for Aeronautics: National Advisory Committee for Aeronautics Washington, D.C., United States
[19] Rasmussen, K. J.R., Full-range stress-strain curves for stainless steel alloys, J. Constr. Steel Res., 59, 1, 47-61 (2003)
[20] Rasmussen, K. J.R.; Rondal, J., Strength curves for aluminium alloy columns, Eng. Struct., 22, 11, 1505-1517 (2000)
[21] Szuladzinski, G., Bending of beams with nonlinear material characteristics, J. Mech. Design, 102, 4, 776-780 (1980)
[22] Prathap, G.; Varadan, T. K., The inelastic large deformation of beams, J. Appl. Mech., 43, 4, 689-690 (1976)
[23] Varadan, T. L.; Joseph, D., Inelastic finite deflections of cantilever beams, J. Aeronaut. Soc. India, 39, 39-41 (1987)
[24] Chryssanthopoulos, M. K.; Low, Y. M., A method for predicting the flexural response of tubular members with non-linear stress-strain characteristics, J. Constr. Steel Res., 57, 11, 1197-1216 (2001)
[25] Giardina, R. J.; Wei, D., Ramberg-Osgood material behavior expression and large deflections of Euler beams, Math. Mech. Solids, 26, 2, 179-198 (2021) · Zbl 07357397
[26] Prathap, G.; Varadan, T. K., Inelastic post-buckling of columns, J. Appl. Mech., 53, 3, 719-721 (1986)
[27] Szymczak, C.; Kujawa, M., Torsional buckling and post-buckling of columns made of aluminium alloy, Appl. Math. Model., 60, 711-720 (2018) · Zbl 1480.74093
[28] Szymczak, C.; Kujawa, M., Flexural buckling and post-buckling of columns made of aluminium alloy, Eur. J. Mech. A-Solid., 73, 420-429 (2019) · Zbl 1406.74262
[29] Basquin, O. H., Tangent Modulus and the Strength of Steel Columns in Tests (1924), Department of Commerce, Bureau of Standards, U.S.
[30] Humer, A., Exact solutions for the buckling and postbuckling of shear-deformable beams, Acta Mech, 224, 7, 1493-1525 (2013) · Zbl 1398.74113
[31] Yu, Y. P.; Chen, L. H.; Sun, W. P.; Zeng, B. H.; Sun, Y. H., An analytical investigation on large post-buckling behavior of a drilling shaft modeled as a rotating beam with various boundary conditions, Int. J. Mech. Sci., 148, 486-495 (2018)
[32] Yu, Y. P.; Lim, C. W.; Wu, B. S., Analytical approximations to large hygrothermal buckling deformation of a beam, J. Struct. Eng., 134, 4, 602-607 (2008)
[33] Yu, Y. P.; Wu, B. S.; Lim, C. W., Numerical and analytical approximations to large post-buckling deformation of MEMS, Int. J. Mech. Sci., 55, 1, 95-103 (2012)
[34] Yu, Y. P.; Chen, L. H.; Lim, C. W.; Sun, Y. H., Predicting nonlinear dynamic response of internal cantilever beam system on a steadily rotating ring, Appl. Math. Model., 64, 541-555 (2018) · Zbl 1480.74197
[35] Wang, Y.; Fan, F.; Lin, S., Experimental investigation on the stability of aluminium alloy 6082 circular tubes in axial compression, Thin. Wall. Struct., 89, 54-66 (2015)
[36] Adeoti, G. O.; Fan, F.; Wang, Y. J.; Zhai, X. M., Stability of 6082-T6 aluminium alloy columns with H-section and rectangular hollow sections, Thin. Wall. Struct., 89, 1-16 (2015)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.