×

Anisotropic wear framework for 3D contact and rolling problems. (English) Zbl 1353.74058

Summary: This work presents a new methodology to compute anisotropic wear on 3D frictional contact and/or rolling problems. The damage on the solids’ geometries and the contact pressures evolution under anisotropic tribological properties can be predicted using this contact framework. The present formulation uses the Boundary Element Method and/or the Finite Element Method for computing the elastic influence coefficients, and enforces contact constraints using a new augmented scheme. An anisotropic wear model is considered, together with an orthotropic friction law. The methodology and the proposed algorithm are illustrated with some examples, in which different studies about the influence of anisotropy on wear are presented.

MSC:

74M10 Friction in solid mechanics
74M15 Contact in solid mechanics

Software:

CONTACT
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Holm, R., Electric Contacts (1946), Almquist and Wiksells Akademiska Handböcker: Almquist and Wiksells Akademiska Handböcker Stockholm
[2] Archard, J. F., Contact and rubbing of flat surfaces, J. Appl. Phys., 24, 981-988 (1953)
[3] Rabinowicz, E., Friction and Wear of Materials (1995), Wiley: Wiley New York
[4] Hills, D. A.; Nowell, D., Mechanics of Fretting Fatigue (1994), Kluwer Academic Publishers: Kluwer Academic Publishers Dordrecht, London · Zbl 0857.73003
[5] Goryacheva, I. G.; Rajeev, P. T.; Farris, T. N., Wear in partial slip contact, ASME J. Tribol., 123, 848-856 (2001)
[6] Hills, D. A.; Sackfield, A.; Paynter, R. J.H., Simulation of fretting wear in halfplane geometries: Part I - The solution for long term wear, ASME J. Tribol., 131, 31401-31404 (2009)
[7] Nowell, D., Simulation of fretting wear in halfplane geometries: Part II - Analysis of the transient wear problem using quadratic programming, ASME J. Tribol., 131, 21402-21409 (2010)
[8] Olofsson, U.; Andersson, S.; Björklund, S., Simulation of mild wear in boundary lubricated spherical roller thrust bearing, Wear, 241, 180-185 (2000)
[9] Jendel, T., Prediction of wheel profile wear-comparisons with field measurements, Wear, 253, 89-99 (2002)
[10] Enblom, R.; Berg, M., Simulation of railway wheel profile development due to wear-influence of disc braking and contact environment, Wear, 258, 1055-1063 (2005)
[11] Telliskivi, T., Simulation of wear in a rolling-sliding contact by a semi-Winkler model and the Archard’s wear law, Wear, 256, 817-831 (2004)
[12] Telliskivi, T.; Olofsson, U., Wheel-rail wear simulation, Wear, 257, 1145-1153 (2004)
[13] Hegadekatte, V.; Kurzenhäuser, S.; Kraft, O. A., predictive modeling scheme for wear in tribometers, Tribol. Int., 41, 1020-1031 (2008)
[14] Paczelt, I.; Kucharski, S.; Mróz, Z., The experimental and numerical analysis of quasi-steady wear processes for a sliding spherical indenter, Wear, 274-275, 127-148 (2012)
[15] Johansson, L., Numerical simulation of contact pressure evolution in fretting, ASME J. Tribol., 116, 247-254 (1994)
[16] Strömberg, N.; Johansson, L.; Klarbring, A., Derivation and analysis of a generalized standard model for contact, friction and wear, Int. J. Solids Struct., 33, 13, 1817-1836 (1996) · Zbl 0926.74012
[17] Strömberg, N., An augmented lagrangian method for fretting problems, Eur. J. Mech. A Solids, 16, 4, 573-593 (1997) · Zbl 0880.73058
[18] Strömberg, N. A., Newton method for three-dimensional fretting problems, Int. J. Solids Struct., 36, 4, 2075-2090 (1999) · Zbl 0949.74070
[19] Ireman, P.; Klarbring, A.; Strömberg, N., A model of damage coupled to wear, Int. J. Solids Struct., 40, 2957-2974 (2003) · Zbl 1038.74510
[20] Ireman, P.; Klarbring, A.; Strömberg, N., Gradient theory of damage coupled to frictional contact and wear, and its numerical treatment, CMES, 52, 125-158 (2009) · Zbl 1231.74324
[21] Põdra, P.; Andersson, S., Simulating sliding wear with finite element method, Tribol. Int., 32, 71-81 (1999)
[22] Põdra, P.; Andersson, S., Finite element analysis wear simulation of a conical spinning contact considering surface topography, Wear, 224, 13-21 (1999)
[23] McColl, I. R.; Ding, J.; Leen, S. B., Finite element simulation and experimental validation of fretting wear, Wear, 256, 1114-1127 (2004)
[24] Madge, J. J.; Leen, S. B.; McColl, I. R.; Shipway, P. H., Contact-evolution based prediction of fretting fatigue life: effect of clip amplitude, Wear, 262, 1159-1170 (2007)
[25] Jourdan, F.; Samida, A., An implicit numerical method for wear modeling applied to a hip joint prosthesis problem, Comput. Methods Appl. Mech. Eng., 198, 2209-2217 (2009) · Zbl 1227.74035
[26] Sfantos, G. K.; Aliabadi, M. H., A boundary element sensitivity formulation for contact problems using the implicit differentiation method, Eng. Anal. Bound. Elem., 30, 22-30 (2006) · Zbl 1195.74257
[27] Sfantos, G. K.; Aliabadi, M. H., Application of BEM and optimization technique to wear problems, Int. J. Solids Struct., 43, 3626-3642 (2006) · Zbl 1121.74439
[28] Sfantos, G. K.; Aliabadi, M. H., Wear simulation using an incremental sliding boundary element method, Wear, 260, 1119-1128 (2006) · Zbl 1195.74257
[29] Sfantos, G. K.; Aliabadi, M. H., A boundary element formulation for three-dimensional sliding wear simulation, Wear, 262, 672-683 (2007) · Zbl 1194.74503
[30] Lee, C. Y.; Tian, L. S.; Bae, J. W.; Chai, Y. S., Application of influence function method on the fretting wear of tube-to-plane contact, Tribol. Int., 42, 951-957 (2009)
[31] Kim, T. W.; Moon, S. M.; Cho, Y. J., Prediction of fretting wear using boundary element method, Tribol. Int., 44, 1571-1576 (2011)
[32] Rodríguez-Tembleque, L.; Abascal, R.; Aliabadi, M. H., A boundary element formulation for wear modeling on 3D contact and rolling-contact problems, Int. J. Solids Struct., 47, 2600-2612 (2010) · Zbl 1196.74274
[33] Rodríguez-Tembleque, L.; Abascal, R.; Aliabadi, M. H., A boundary element formulation for 3D fretting-wear problems, Eng. Anal. Bound. Elem., 35, 935-943 (2011) · Zbl 1259.74066
[34] Curnier, A., A theory of friction, Int. J. Solids Struct., 7, 637-647 (1984) · Zbl 0543.73138
[35] Michalowski, R.; Mróz, Z., Associated and non-associated sliding rules in contact friction problems, Int. J. Solids Struct., 7, 637-647 (1984)
[36] Mróz, Z.; Stupkiewicz, S., An anisotropic friction and wear model, Int. J. Solids Struct., 31, 1113-1131 (1994) · Zbl 0945.74524
[37] Zmitrowicz, A., Mathematical descriptions of anisotropic friction, Int. J. Solids Struct., 25, 837-862 (1989) · Zbl 0703.73071
[38] Zmitrowicz, A., An equation of anisotropic friction with sliding path curvature effects, Int. J. Solids Struct., 36, 2825-2848 (1999) · Zbl 0948.74038
[39] Zmitrowicz, A., Models of kinematics dependent anisotropic and heterogeneous friction, Int. J. Solids Struct., 43, 4407-4451 (2006) · Zbl 1120.74327
[40] Zmitrowicz, A., Contact stress: a short survey of models and methods of computations, Arch. Comput. Methods, 80, 1407-1428 (2010) · Zbl 1271.74364
[41] Johnson, K. L., Contact Mechanics (1985), Cambridge University Press · Zbl 0599.73108
[42] Hills, D. A.; Nowell, D.; Sackfield, A., Mechanics of Elastic Contact (1993), Butterworth-Heinemann: Butterworth-Heinemann Oxford, UK · Zbl 0631.73097
[43] Buczkowski, R.; Kleiber, M., Elasto-plastic interface model for 3D-frictional orthotropic contact problems, Int. J. Numer. Methods Eng., 40, 599-619 (1997) · Zbl 0888.73055
[44] Buczkowski, R.; Kleiber, M., Statical models of rough surfaces for finite element 3D-contact analysis, Arch. Comput. Methods, 16, 399-424 (2009) · Zbl 1179.74135
[45] Zhang, H. W.; He, S. Y.; Li, X. S.; Wriggers, P., A new algorithm for numerical solution of 3D elastoplastic contact problems with orthotropic friction law, Comput. Mech., 34, 1-14 (2004) · Zbl 1072.74061
[46] Jones, R. S.; Papadopoulos, P., Simulating frictional response using interpolated traction fields, Comput. Methods Appl. Mech. Eng., 195, 588-613 (2006) · Zbl 1090.74057
[47] Konyukhov, A.; Schweizerhof, K., Covariant description of contact interfaces considering anisotropy for adhesion and friction. Part 1 - Formulation and analysis of the computational model, Comput. Methods Appl. Mech. Eng., 195, 588-613 (2006)
[48] Hjiaj, M.; de Saxcé, G.; Mróz, Z., A variational inequality-based formulation of the frictional contact law with a non-associated sliding rule, Eur. J. Mech. A/Solids, 21, 49-59 (2002) · Zbl 1005.74043
[49] Hjiaj, M.; Feng, Z.-Q.; de Saxcé, G.; Mróz, Z., Three-dimensional finite element computations for frictional contact problems with non-associated sliding rule, Int. J. Numer. Methods Eng., 60, 2045-2076 (2004) · Zbl 1072.74060
[50] Feng, Z.-Q.; Hjiaj, M.; de Saxcé, G.; Mróz, Z., Influence of frictional anisotropy on contacting surfaces during loading/unloading cycles, Int. J. Non-Linear Mech., 41, 936-948 (2006) · Zbl 1160.74389
[51] Feng, Z.-Q.; Hjiaj, M.; de Saxcé, G.; Mróz, Z., Effect of frictional anisotropy on the quasistatic motion of a deformable solid sliding an a planar surface, Comput. Mech., 37, 349-361 (2006) · Zbl 1099.74047
[52] de Saxcé, G.; Feng, Z.-Q., New inequality and functional for contact with friction: the implicit standard material approach, Mech. Struct. Mach., 19, 301-325 (1991)
[53] Joli, P.; Feng, Z.-Q., Uzawa and Newton algorithms to solve frictional contact problems within the bi-potential framework, Int. J. Numer. Methods Eng., 73, 317-330 (2008) · Zbl 1159.74040
[54] Zmitrowicz, A., Constitutive equations for anisotropic wear, Int. J. Eng. Sci., 31, 509-528 (1993) · Zbl 0770.73004
[55] Zmitrowicz, A., Wear patterns and laws of wear, J. Theor. Appl. Mech., 31, 509-528 (2006)
[56] Alart, P.; Curnier, A., A mixed formulation for frictional contact problems prone to Newton like solution methods, Comput. Methods Appl. Mech. Engrg., 92, 353-375 (1991) · Zbl 0825.76353
[57] Klarbring, A., Mathematical programming and augmented Lagrangian methods for frictional contact problems, (Curnier, A., Proceedings Contact Mechanics International Symposium (1992), Presses Polytechniques et Universitaires Romandes: Presses Polytechniques et Universitaires Romandes Lausanne), 409-422
[58] Klarbring, A., Mathematical programming in contact problems, (Aliabadi, M. H.; Brebbia, C. A., Computational Methods in Contact Mechanics (1993), Computational Mechanics Publications) · Zbl 0677.73077
[59] Christensen, P. W.; Klarbring, A.; Pang, J. S.; Strömberg, N., Formulation and comparison of algorithms for frictional contact problems, Int. J. Numer. Methods Eng., 42, 145-173 (1998) · Zbl 0917.73063
[60] González, J. A.; Park, K. C.; Felippa, C. A.; Abascal, R., A Formulation based on localized Lagrange multipliers for BEM-FEM coupling in contact problems, Comput. Methods Appl. Mech. Eng., 197, 623-640 (2008) · Zbl 1169.74639
[61] Oliver, J.; Hartmann, S.; Cante, J. C.; Weyler, R.; Hernández, J. A., A contact domain method for large deformation frictional contact problems. Part 1: Theoretical basis, Comput. Methods Appl. Mech. Eng., 198, 2591-2606 (2009) · Zbl 1228.74055
[62] Hartmann, S.; Oliver, J.; Weyler, R.; Cante, J. C.; Hernández, J. A., A contact domain method for large deformation frictional contact problems. Part 2: Numerical aspects, Comput. Methods Appl. Mech. Eng., 198, 2607-2631 (2009) · Zbl 1228.74054
[63] Kalker, J. J., Three-Dimensional Elastic Bodies in Rolling Contact (1990), Kluwer Academic Press: Kluwer Academic Press Dordrecht · Zbl 0709.73068
[64] González, J. A.; Abascal, R., Using the boundary element method to solve rolling contact problems, Eng. Anal. Bound. Elem., 21, 392-395 (1998) · Zbl 0967.74613
[65] González, J. A.; Abascal, R., An algorithm to solve coupled 2D rolling contact problems, Int. J. Numer. Methods Eng., 49, 9, 1143-1167 (2000) · Zbl 1009.74076
[66] González, J. A.; Abascal, R., Solving 2D transient rolling contact problems using the BEM and mathematical programming techniques, Int. J. Numer. Methods Eng., 53, 4, 843-875 (2002)
[67] Abascal, R.; Rodrı´guez-Tembleque, L., Steady-state 3D rolling-contact using boundary elements, Commun. Numer. Methods Eng., 33, 905-920 (2007) · Zbl 1128.74031
[68] Rodríguez-Tembleque, L.; Abascal, R., A 3D FEM-BEM rolling contact formulation for unstructured meshes, Int. J. Solids Struct., 47, 330-353 (2010) · Zbl 1183.74310
[69] P. Wriggers, Computational Contact Mechanics, West Sussex, England, 2002.; P. Wriggers, Computational Contact Mechanics, West Sussex, England, 2002. · Zbl 1104.74002
[70] Laursen, T. A., Computational Contact and Impact Mechanics (2002), Springer: Springer England · Zbl 0996.74003
[71] Zienkiewicz, O. C., The Finite Element Method (1977), McGraw-Hill · Zbl 0435.73072
[72] Brebbia, C. A.; Dominguez, J., Boundary Elements: An Introductory Course (1992), Computational Mechanics Publications, John Wiley & Sons · Zbl 0780.73002
[73] Aliabadi, M. H., The Boundary Element Method. The Boundary Element Method, Applications in Solids and Structures, vol. 2 (2002), John Wiley & Sons · Zbl 0994.74003
[74] Rodrı´guez-Tembleque, L.; Abascal, R., A FEM-BEM fast methodology for 3D frictional contact problems, Comput. Struct., 88, 924-937 (2010) · Zbl 1183.74310
[75] Blazek, J., Computational Fluids Dynamics: Principles and Aplications (2001), Elsevier: Elsevier New York · Zbl 0995.76001
[76] Rodrı´guez-Tembleque, L.; Buroni, F. C.; Abascal, R.; Sáez, A., 3D frictional contact of anisotropic solids using BEM, Eur. J. Mech. A. Solids., 30, 95-104 (2011) · Zbl 1261.74023
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.