zbMATH — the first resource for mathematics

Fuzzy failure mode and effect analysis application to reduce risk level in a ready-mixed concrete plant: a fuzzy rule based system modelling approach. (English) Zbl 07318155
Summary: In this study, failure mode and effect analysis were applied to evaluate and eliminate potential failure modes in a Ready-Mixed Concrete Plant using a fuzzy-rule-base system. The questionnaires were specially prepared for each sub-department such as production plant, workshop and maintenance, dumping grounds, materials transportation and storage, utilities, administrative office, social facility, quality control laboratory and wastewater pool and recycling facilities. The questions were answered by the workers in each section. Risk Priority Numbers (RPNs) and Fuzzy Risk Priority Numbers (FRPN), which measure potential failure modes, were calculated using the risk parameters. High-risk areas were identified, and some suggestions were made to reduce accident risk at the Ready-Mixed Concrete Plant. Three questionnaires were prepared, based on these suggestions, and distributed to workers to determine whether the suggestions would reduce the risk or not. Based on conditions at the time the recommendations were implemented and improvement rates were calculated. The results showed that the fuzzy failure mode and effect analysis methodology were effective in identifying and eliminating potential failure modes at the Ready-Mixed Concrete Plant. The results can also be used by other ready-mixed concrete manufacturers who want to improve the safety of their operations.
90Bxx Operations research and management science
Full Text: DOI
[1] Abdelgawad, M.; Fayek, A., Risk management in the construction industry using combined fuzzy FMEA and fuzzy AHP, J. Constr. Eng. Manage., 136, 1028-1036 (2010)
[2] Arabian-Hoseynabadi, H.; Oraee, H.; Tavner, P. J., Failure modes and effects analysis (FMEA) for wind turbines, Int. J. Electr. Power Energy Syst., 32, 817-824 (2010)
[3] Association, T. R.-M. C., Ready Mixed Concrete Sector’s Statistics for the Year 2013, 6 (2014), Turkey Ready-Mixed Concrete Association
[4] Braglia, M.; Frosolini, M.; Montanari, R., Fuzzy TOPSIS approach for failure mode, effects and criticality analysis, Qual. Reliab. Eng. Int., 19, 425-443 (2003)
[5] Carmignani, G., An integrated structural framework to cost-based FMECA: The priority-cost FMECA, Reliab. Eng. Syst. Saf., 94, 861-871 (2009)
[6] Chang, K.-H.; Chang, Y.-C.; Tsai, I. T., Enhancing FMEA assessment by integrating grey relational analysis and the decision making trial and evaluation laboratory approach, Eng. Fail. Anal., 31, 211-224 (2013)
[7] Chang, K.-H.; Cheng, C.-H., Evaluating the risk of failure using the fuzzy OWA and DEMATEL method, J. Intell. Manuf., 22, 113-129 (2011)
[8] Chin, K.-S.; Chan, A.; Yang, J.-B., Development of a fuzzy FMEA based product design system, Int. J. Adv. Manuf. Technol., 36, 633-649 (2007)
[9] Chin, K.-S.; Wang, Y.-M.; Ka Kwai Poon, G.; Yang, J.-B., Failure mode and effects analysis using a group-based evidential reasoning approach, Comput. Oper. Res., 36, 1768-1779 (2009) · Zbl 1179.90089
[10] Şen, Z., Fuzzy algorithm for estimation of solar irradiation from sunshine duration, Sol. Energy, 63, 39-49 (1998)
[11] Demir, F., A new way of prediction elastic modulus of normal and high strength concrete—fuzzy logic, Cem. Concr. Res., 35, 1531-1538 (2005)
[12] Executive, H.a. S., Health and safety in construction sector in Great Britain (2015)
[13] Gargama, H.; Chaturvedi, S. K., Criticality assessment models for failure mode effects and criticality analysis using fuzzy logic, IEEE Trans. Reliab., 60, 102-110 (2011)
[14] Geum, Y.; Cho, Y.; Park, Y., A systematic approach for diagnosing service failure: Service-specific FMEA and grey relational analysis approach, Math. Comput. Modelling, 54, 3126-3142 (2011) · Zbl 1235.90054
[15] Greubel, J.; Nachreiner, F., The validity of the risk index for comparing the accident risk associated with different work schedules, Accid. Anal. Prev., 50, 1090-1095 (2013)
[16] Guimarães, A. C.F.; Lapa, C. M.F., Fuzzy FMEA applied to PWR chemical and volume control system, Prog. Nucl. Energy, 44, 191-213 (2004)
[17] Guimarães, A. C.F.; Lapa, C. M.F., Fuzzy inference to risk assessment on nuclear engineering systems, Appl. Soft Comput., 7, 17-28 (2007)
[18] Güler, K.; Demir, F.; Pakdamar, F., Stress-strain modelling of high strength concrete by fuzzy logic approach, Constr. Build. Mater., 37, 680-684 (2012)
[19] Hu, A. H.; Hsu, C.-W.; Kuo, T.-C.; Wu, W.-C., Risk evaluation of green components to hazardous substance using FMEA and FAHP, Expert Syst. Appl., 36, 7142-7147 (2009)
[20] Jong, C. H.; Tay, K. M.; Lim, C. P., Application of the fuzzy failure mode and effect analysis methodology to edible bird nest processing, Comput. Electron. Agric., 96, 90-108 (2013)
[21] Jørgensen, K., Prevention of “simple accidents at work” with major consequences, Saf. Sci., 81, 46-58 (2016)
[22] Kang, M.-s.; Cho, J.; Ahmed, R.; Heo, G.; Kim, H. J.; Lee, Y.-s., Design failure mode and effect analysis for Korean fusion DEMO plant, Fusion Eng. Des., 87, 412-417 (2012)
[23] Kazaz, A.; Ulubeyli, S.; Turker, F., The quality perspective of the ready-mixed concrete industry in Turkey, Build. Environ., 39, 1349-1357 (2004)
[24] Khalaj, G.; Yoozbashizadeh, H.; Khodabandeh, A.; Nazari, A., Modeling hardness of Nb-microalloyed steels using fuzzy logic, Neural Comput. Appl., 23, 207-214 (2013)
[25] Kosko, B., Neural Networks and Fuzzy Systems (1992), Prentice-Hall: Prentice-Hall Englewood Cliffs, NJ
[26] Kumru, M.; Kumru, P. Y., Fuzzy FMEA application to improve purchasing process in a public hospital, Appl. Soft Comput., 13, 721-733 (2013)
[27] Kuo, R. J.; Wu, Y. H.; Hsu, T. S., Integration of fuzzy set theory and TOPSIS into HFMEA to improve outpatient service for elderly patients in Taiwan, J. Chin. Med. Assoc., 75, 341-348 (2012)
[28] Kutlu, A. C.; Ekmekçioğlu, M., Fuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP, Expert Syst. Appl., 39, 61-67 (2012)
[29] Liu, H.-C.; Liu, L.; Bian, Q.-H.; Lin, Q.-L.; Dong, N.; Xu, P.-C., Failure mode and effects analysis using fuzzy evidential reasoning approach and grey theory, Expert Syst. Appl., 38, 4403-4415 (2011)
[30] Liu, H.-C.; Liu, L.; Liu, N., Risk evaluation approaches in failure mode and effects analysis: A literature review, Expert Syst. Appl., 40, 828-838 (2013)
[31] Liu, H.-C.; Liu, L.; Liu, N.; Mao, L.-X., Risk evaluation in failure mode and effects analysis with extended VIKOR method under fuzzy environment, Expert Syst. Appl., 39, 12926-12934 (2012)
[32] Liu, H.-T.; Tsai, Y.-l., A fuzzy risk assessment approach for occupational hazards in the construction industry, Saf. Sci., 50, 1067-1078 (2012)
[33] Mariajayaprakash, A.; Senthilvelan, T., Optimizing process parameters of screw conveyor (sugar mill boiler) through failure mode and effect analysis (FMEA) and Taguchi method, J. Fail. Anal. Prev., 14, 772-783 (2014)
[34] Mariajayaprakash, A.; Senthilvelan, T.; Gnanadass, R., Optimization of process parameters through fuzzy logic and genetic algorithm — A case study in a process industry, Appl. Soft Comput., 30, 94-103 (2015)
[35] Mathworks, M., Fuzzy Logic Toolbox, User’s Guide, 2014 (2014), The Mathworks: The Mathworks Massachusetts
[36] Molinero-Ruiz, E.; Pitarque, S.; Fondevila-McDonald, Y.; Martin-Bustamante, M., How reliable and valid is the coding of the variables of the European Statistics on Accidents at Work (ESAW)? A need to improve preventive public policies, Saf. Sci., 79, 72-79 (2015)
[37] Narayanagounder, S.; Gurusami, K., A new approach for prioritization of failure modes in design FMEA using ANOVA, World Acad. Sci. Eng. Technol., 49, 524-531 (2009)
[38] Nepal, B. P.; Yadav, O. P.; Monplaisir, L.; Murat, A., A framework for capturing and analyzing the failures due to system/component interactions, Qual. Reliab. Eng. Int., 24, 265-289 (2008)
[39] Ozgan, E., Fuzzy logic and statistical-based modelling of the Marshall stability of asphalt concrete under varying temperatures and exposure times, Adv. Eng. Softw., 40, 527-534 (2009) · Zbl 1419.90045
[40] Palady, P., Failure Modes and Effects Analysis: Predicting & Preventing Problems Before They Occur (1995), PT Publications Inc.
[41] Parkan, C.; Wu, M.-L., Decision-making and performance measurement models with applications to robot selection, Comput. Ind. Eng., 36, 503-523 (1999)
[42] Pillay, A.; Wang, J., Modified failure mode and effects analysis using approximate reasoning, Reliab. Eng. Syst. Saf., 79, 69-85 (2003)
[43] Rafie, M.; Samimi Namin, F., Prediction of subsidence risk by FMEA using artificial neural network and fuzzy inference system, Int. J. Mining Sci. Technol., 25, 655-663 (2015)
[44] Rajiv Kumar, S.; Dinesh, K.; Pradeep, K., Systematic failure mode effect analysis (FMEA) using fuzzy linguistic modelling, Int. J. Qual. Reliab. Manage., 22, 986-1004 (2005)
[45] Saltan, M.; Saltan, S.; Şahiner, A., Fuzzy logic modeling of deflection behavior against dynamic loading in flexible pavements, Constr. Build. Mater., 21, 1406-1414 (2007)
[46] Sankar, N. R.; Prabhu, B. S., Modified approach for prioritization of failures in a system failure mode and effects analysis, Int. J. Qual. Reliab. Manage., 18, 324-336 (2001)
[47] Selim, H.; Yunusoglu, M. G.; Yılmaz Balaman, Ş., A dynamic maintenance planning framework based on fuzzy TOPSIS and FMEA: Application in an international food company, Qual. Reliab. Eng. Int., 32, 795-804 (2016)
[48] Seyed-Hosseini, S. M.; Safaei, N.; Asgharpour, M. J., Reprioritization of failures in a system failure mode and effects analysis by decision making trial and evaluation laboratory technique, Reliab. Eng. Syst. Saf., 91, 872-881 (2006)
[49] Sharma, R. K.; Kumar, D.; Kumar, P., Systematic failure mode effect analysis (FMEA) using fuzzy linguistic modelling, Int. J. Qual. Reliab. Manage., 22, 986-1004 (2005)
[50] Sharma, R. K.; Kumar, D.; Kumar, P., Fuzzy modeling of system behavior for risk and reliability analysis, Internat. J. Systems Sci., 39, 563-581 (2008) · Zbl 1283.93192
[51] Sharma, R. K.; Sharma, P., Integrated framework to optimize RAM and cost decisions in a process plant, J. Loss Prev. Process Ind., 25, 883-904 (2012)
[52] Silva, M. M.; de Gusmão, A. P.H.; Poleto, T.; Silva, L. C.e.; Costa, A. P.C. S., A multidimensional approach to information security risk management using FMEA and fuzzy theory, Int. J. Inf. Manage., 34, 733-740 (2014)
[53] Stamatis, D. M., Failure Mode and Effects Analysis: FMEA from Theory to Execution (1997), Productivity Press India Pvt. Ltd.: Productivity Press India Pvt. Ltd. Madras
[54] Stamatis, D. H., Failure Mode and Effect Analysis: FMEA from Theory to Execution (2003)
[55] Tansel İç, Y.; Yıldırım, S., MOORA-based taguchi optimisation for improving product or process quality, Int. J. Prod. Res., 51, 3321-3341 (2013)
[56] Tay, K. M.; Lim, C. P., Enhancing the failure mode and effect analysis methodology with fuzzy inference techniques, J. Intell. Fuzzy Systems, 21, 135-146 (2010)
[57] Ünsar, A. S.; Süt, N., Occupational accidents in the energy sector: Analysis of occupational accidents that occurred in thermal and hydroelectric centrals between 2002 and 2010 in Turkey, Procedia Soc. Behav. Sci., 181, 388-397 (2002)
[58] Xu, K.; Tang, L. C.; Xie, M.; Ho, S. L.; Zhu, M. L., Fuzzy assessment of FMEA for engine systems, Reliab. Eng. Syst. Saf., 75, 17-29 (2002)
[59] Yang, Z.; Bonsall, S.; Wang, J., Fuzzy rule-based Bayesian reasoning approach for prioritization of failures in FMEA, IEEE Trans. Reliab., 57, 517-528 (2008)
[60] Yang, J.; Huang, H.-Z.; He, L.-P.; Zhu, S.-P.; Wen, D., Risk evaluation in failure mode and effects analysis of aircraft turbine rotor blades using Dempster-Shafer evidence theory under uncertainty, Eng. Fail. Anal., 18, 2084-2092 (2011)
[61] Yang, Z.; Wang, J., Use of fuzzy risk assessment in FMEA of offshore engineering systems, Ocean Eng., 95, 195-204 (2015)
[62] Yeh, T.-M.; Chen, L.-Y., Fuzzy-based risk priority number in FMEA for semiconductor wafer processes, Int. J. Prod. Res., 52, 539-549 (2014)
[63] Yeh, R. H.; Hsieh, M.-H., Fuzzy assessment of FMEA for a sewage plant, J. Chin. Inst. Ind. Eng., 24, 505-512 (2007)
[64] Yoon, S. J.; Lin, H. K.; Chen, G.; Yi, S.; Choi, J.; Rui, Z., Effect of occupational health and safety management system on work-related accident rate and differences of occupational health and safety management system awareness between managers in South Korea’s construction industry, Saf. Health Work, 4, 201-209 (2013)
[65] Zadeh, L., Fuzzy Set, 338-353 (1965)
[66] Zafiropoulos, E. P.; Dialynas, E. N., Reliability prediction and failure mode effects and criticality analysis (FMECA) of electronic devices using fuzzy logic, Int. J. Qual. Reliab. Manage., 22, 183-200 (2005)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.