×

zbMATH — the first resource for mathematics

International Journal of Mechanical Sciences

Short Title: Int. J. Mech. Sci.
Publisher: Elsevier Science Ltd (Pergamon), Oxford
ISSN: 0020-7403
Online: http://www.sciencedirect.com/science/journal/00207403
Comments: No longer indexed
Documents Indexed: 1,959 Publications (1965–2009)
all top 5

Latest Issues

51, No. 4 (2009)
51, No. 3 (2009)
51, No. 2 (2009)
51, No. 1 (2009)
50, No. 10-11 (2008)
50, No. 9 (2008)
50, No. 8 (2008)
50, No. 7 (2008)
50, No. 6 (2008)
50, No. 5 (2008)
50, No. 4 (2008)
50, No. 3 (2008)
50, No. 2 (2008)
50, No. 1 (2008)
49, No. 1 (2007)
48, No. 12 (2006)
48, No. 11 (2006)
48, No. 10 (2006)
48, No. 9 (2006)
48, No. 8 (2006)
48, No. 7 (2006)
48, No. 6 (2006)
48, No. 5 (2006)
48, No. 4 (2006)
48, No. 3 (2006)
48, No. 2 (2006)
48, No. 1 (2006)
47, No. 12 (2005)
47, No. 11 (2005)
47, No. 10 (2005)
47, No. 9 (2005)
47, No. 8 (2005)
47, No. 7 (2005)
47, No. 6 (2005)
47, No. 4-5 (2005)
47, No. 3 (2005)
47, No. 2 (2005)
47, No. 1 (2005)
46, No. 12 (2004)
46, No. 11 (2004)
46, No. 10 (2004)
46, No. 9 (2004)
46, No. 8 (2004)
46, No. 7 (2004)
46, No. 6 (2004)
46, No. 5 (2004)
46, No. 4 (2004)
46, No. 3 (2004)
46, No. 2 (2004)
46, No. 1 (2004)
45, No. 12 (2003)
45, No. 11 (2003)
45, No. 10 (2003)
45, No. 9 (2003)
45, No. 8 (2003)
45, No. 6-7 (2003)
45, No. 5 (2003)
45, No. 4 (2003)
45, No. 3 (2003)
45, No. 2 (2003)
45, No. 1 (2003)
44, No. 12 (2002)
44, No. 11 (2002)
44, No. 10 (2002)
44, No. 9 (2002)
44, No. 8 (2002)
44, No. 7 (2002)
44, No. 6 (2002)
44, No. 5 (2002)
44, No. 4 (2002)
44, No. 3 (2002)
44, No. 2 (2002)
44, No. 1 (2002)
43, No. 12 (2001)
43, No. 11 (2001)
43, No. 10 (2001)
43, No. 9 (2001)
43, No. 8 (2001)
43, No. 7 (2001)
43, No. 6 (2001)
43, No. 5 (2001)
43, No. 4 (2001)
43, No. 3 (2001)
43, No. 2 (2001)
43, No. 1 (2001)
42, No. 12 (2000)
42, No. 11 (2000)
42, No. 10 (2000)
42, No. 9 (2000)
42, No. 8 (2000)
42, No. 7 (2000)
42, No. 6 (2000)
42, No. 5 (2000)
42, No. 4 (2000)
42, No. 3 (2000)
42, No. 2 (2000)
42, No. 1 (2000)
41, No. 12 (1999)
41, No. 11 (1999)
41, No. 10 (1999)
...and 145 more Volumes
all top 5

Authors

28 Liew, Kim Meow
18 Chitkara, Naunit R.
18 Kitipornchai, Sritawat
17 Hills, David A.
13 Tomita, Yoshihiro
11 Wang, Chien-Ming
11 Williams, Frederic W.
10 Chung, Kwansoo
10 Gibson, Lorna J.
10 Shen, Huishen
9 Conway, Harry Donald
9 Dodd, Bradley
9 Little, G. H.
9 Meguid, Shaker A.
9 Neale, Kenneth W.
9 Rozvany, George I. N.
9 Tvergaard, Viggo
9 Xiang, Yu
8 Lam, Khin-Yong
8 Leissa, Arthur W.
8 Lin, Zone-Ching
8 Low, Kian Hsiang
8 Tin-Loi, Francis
8 Wagoner, Robert H.
8 Wang, Chang-Yi
7 Ciavarella, Michele
7 Fleck, Norman A.
7 Tabarrok, Behrouz
7 Theocaris, Pericles S.
6 Barlat, Frédéric
6 Calladine, Christopher Reuben
6 Chinh, Pham Duc
6 Duncan, J. L.
6 Durban, David
6 Fischer, Franz Dieter
6 Hwang, Yeong-Maw
6 Johnson, Robert Edward
6 Kitching, R. P.
6 Komori, Kazutake
6 Lee, Sen Yung
6 Lin, Shueei Muh
6 Nowell, David
6 Ohno, Nobutada
6 Osakada, Kozo
6 Reid, S. R.
6 Richmond, Owen
5 Bhat, Rama B.
5 Birman, Victor
5 Cederbaum, Gabriel
5 Celik, K. F.
5 Cleghorn, William L.
5 Collins, Ian F.
5 Fung, Rongfong
5 Hsu, Hung-Hsiou
5 Hutchinson, John Woodside
5 Jane, K. C.
5 Kang, Yuan
5 Komanduri, Ranga
5 Lee, Dong Nyung
5 Leech, C. M.
5 Librescu, Liviu I.
5 Molinari, Alain
5 Morley, Chris T.
5 Naguleswaran, Sanjeev
5 Ng, Teng Yong
5 Rajalingham, C.
5 Reddy, Junuthula Narasimha
5 Rowe, Glenn W. A.
5 Sabuncu, Mustafa
5 Stephen, Neil G.
5 Stronge, W. J.
5 Sturgess, C. E. N.
5 Turvey, Geoffrey John
5 Wierzbicki, Tomasz
5 Wittrick, W. H.
5 Yang, Dong-Yol
4 Al-Hassani, S. T. S.
4 Aleem, A.
4 Atkins, A. G.
4 Balendra, T.
4 Banerjee, Prasanta K.
4 Barber, James R.
4 Bayoumi, Laila S.
4 Benson, Rowland S.
4 Cocks, Alan C. F.
4 Dawe, D. J.
4 Dewhurst, Peter
4 Ding, Shengchao
4 Dunne, Fionn P. E.
4 Ferron, Gérard
4 Hassan, Saleh M.
4 Hayhurst, David R.
4 Hua, Hongxing
4 Huang, Bo-Wun
4 Huang, Jeng-Sheng
4 Huang, Shyhchin
4 Huang, Yonggang Young
4 Jones, Norman L.
4 Kapuria, Santosh
4 Karagiozova, D.
...and 2,066 more Authors

Publications by Year

Citations contained in zbMATH Open

1,197 Publications have been cited 4,973 times in 3,547 Documents Cited by Year
Vibration of functionally graded cylindrical shells. Zbl 0968.74033
Loy, C. T.; Lam, K. Y.; Reddy, J. N.
76
1999
A new beam finite element for the analysis of functionally graded materials. Zbl 1035.74053
Chakraborty, A.; Gopalakrishnan, S.; Reddy, J. N.
54
2003
Elastic and viscoelastic behavior of chiral materials. Zbl 1049.74012
Lakes, Roderic
51
2001
The differential quadrature method for irregular domains and application to plate vibration. Zbl 0857.73077
Bert, Charles W.; Malik, Moinuddin
42
1996
Plastic stress-strain matrix and its application for the solution of elastic-plastic problems by the finite element method. Zbl 0159.56701
Yamada, Y.; Yoshimura, N.; Sakurai, T.
38
1968
Size-dependent nonlinear response of thin elastic films with nano-scale thickness. Zbl 1098.74640
Lim, C. W.; He, L. H.
35
2004
The determination of natural frequencies of rectangular plates with mixed boundary conditions by discrete singular convolution. Zbl 1018.74017
Wei, G. W.; Zhao, Y. B.; Xiang, Y.
34
2001
A finite element method for contact problems of solid bodies. I: Theory and validation. II: Application to turbine blade fastenings. Zbl 0226.73052
Chan, S. K.; Tuba, I. S.
34
1971
A plasticity theory for porous solids. Zbl 0247.73038
Green, R. J.
32
1972
Differential quadrature method for Mindlin plates on Winkler foundations. Zbl 0841.73075
Liew, K. M.; Han, J.-B.; Xiao, Z. M.; Du, H.
30
1996
Instability and self-contact phenomena in the writhing of clamped rods. Zbl 1051.74571
van der Heijden, G. H. M.; Neukirch, S.; Goss, V. G. A.; Thompson, J. M. T.
29
2003
On plastic deformation and the dynamics of 3D dislocations. Zbl 0909.73074
Zbib, Hussein M.; Rhee, Moono; Hirth, John P.
28
1998
Extended exact solutions for least-weight truss layouts. I: Cantilever with a horizontal axis of symmetry. II: Unsymmetric cantilevers. Zbl 0805.73046
Lewiński, T.; Zhou, M.; Rozvany, G. I. N.
28
1994
The effects of non-periodic microstructure on the elastic properties of two-dimensional cellular solids. Zbl 0859.73048
Silva, Matthew J.; Hayes, Wilson C.; Gibson, Lorna J.
27
1995
Buckling analysis of circular plates of functionally graded materials under uniform radial compression. Zbl 1031.74027
Najafizadeh, M. M.; Eslami, M. R.
27
2002
Nonlinear bending response of functionally graded plates subjected to transverse loads and in thermal environments. Zbl 1022.74023
Shen, Hui-Shen
26
2002
Properties of a chiral honeycomb with a Poisson’s ratio of \(-1\). Zbl 0894.73018
Prall, D.; Lakes, R. S.
24
1997
A user-friendly theory of orthotropic plasticity in sheet metals. Zbl 0825.73174
Hill, R.
23
1993
On the numerical assessment of the safety factor of elastic-plastic structures under variable loading. Zbl 0891.73051
Groß-Weege, Johannes
23
1997
Limit analysis of frictional block assemblies as a mathematical program with complementarity constraints. Zbl 1072.74543
Ferris, M. C.; Tin-Loi, F.
22
2001
Size effects in ductile cellular solids. I: Modeling. Zbl 1071.74682
Onck, P. R.; Andrews, E. W.; Gibson, L. J.
20
2001
Constitutive and damage evolution equations of elastic-brittle materials based on irreversible thermodynamics. Zbl 0893.73045
Murakami, S.; Kamiya, K.
20
1997
Thermomechanical postbuckling analysis of moderately thick functionally graded plates and shallow shells. Zbl 1192.74138
Woo, J.; Meguid, S. A.; Stranart, J. C.; Liew, K. M.
20
2005
A nonlinear inequality, finite element approach to the direct computation of shakedown load safety factors. Zbl 0669.73027
Genna, Francesco
20
1988
A theory of plastic anisotropy based on a yield function of fourth order (plane stress state)-I. Zbl 0373.73038
Gotoh, M.
19
1977
Exact solutions for vibration and buckling of an SS-C-SS-C rectangular plate loaded by linearly varying in-plane stresses. Zbl 1015.74504
Leissa, Arthur W.; Kang, Jae-Hoon
19
2002
Performance of the \(p\)-version finite element method for limit analysis. Zbl 1063.74103
Tin-Loi, F.; Ngo, N. S.
18
2003
Free vibration of multi-layered spherically isotropic hollow spheres. Zbl 1010.74025
Chen, W. Q.; Ding, H. J.
18
2001
Transverse vibration of a rotating twisted Timoshenko beams under axial loading using differential transform. Zbl 0945.74029
Chen, Cha’o Kuang; Ho, Shing Huei
18
1999
On applications of generalized functions to the analysis of Euler-Bernoulli beam-columns with jump discontinuities. Zbl 0998.74044
Yavari, Arash; Sarkani, Shahram
18
2001
Nonlinear dynamics of a spur gear pair with time-varying stiffness and backlash based on incremental harmonic balance method. Zbl 1192.74148
Shen, Yongjun; Yang, Shaopu; Liu, Xiandong
18
2006
Vibration amplitude and thermal effects on the nonlinear behavior of thin circular functionally graded plates. Zbl 1264.74084
Allahverdizadeh, A.; Naei, M. H.; Nikkhah Bahrami, M.
17
2008
Role of plastic anisotropy and its evolution on springback. Zbl 0986.74506
Geng, L.; Wagoner, R. H.
17
2002
Bending and buckling of thick symmetric rectangular laminates using the moving least-squares differential quadrature method. Zbl 1049.74022
Liew, K. M.; Huang, Y. Q.
17
2003
Three-dimensional vibration analysis of fluid-filled orthotropic FGM cylindrical shells. Zbl 1112.74389
Chen, W. Q.; Bian, Z. G.; Ding, H. J.
17
2004
An anti-interpenetration model and connections between interphase and interface models in particle-reinforced composites. Zbl 1192.74084
Wang, J.; Duan, H. L.; Zhang, Z.; Huang, Z. P.
17
2005
Geometrically nonlinear analysis of functionally graded shells. Zbl 1264.74153
Zhao, X.; Liew, K. M.
16
2009
Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions. Zbl 1042.74507
Banabic, D.; Kuwabara, T.; Balan, T.; Comsa, D. S.; Julean, D.
16
2003
Numerical differential quadrature method for Reissner/Mindlin plates on two-parameter foundations. Zbl 0910.73075
Han, J.-B.; Liew, K. M.
16
1997
Exact vibration solution for initially stressed Mindlin plates on Pasternak foundations. Zbl 0799.73048
Xiang, Y.; Wang, C. M.; Kitipornchai, S.
16
1994
Finite element method for linear micropolar elasticity and numerical study of some scale effects phenomena in MEMS. Zbl 1098.74054
Li, Lei; Xie, Shuisheng
16
2004
Anti-plane shear crack in a functionally gradient piezoelectric layer bonded to dissimilar half spaces. Zbl 1192.74322
Hu, K. Q.; Zhong, Z.; Jin, B.
16
2005
Size effects in ductile cellular solids. II: Experimental results. Zbl 1071.74680
Andrews, E. W.; Gioux, G.; Onck, P.; Gibson, L. J.
15
2001
Axisymmetric free vibration of thick annular plates. Zbl 0966.74029
Han, J.-B.; Liew, K. M.
15
1999
Elastic-plastic stresses in a rotating solid disk. Zbl 0953.74027
You, L. H.; Zhang, J. J.
15
1999
The effects of non-periodic microstructure and defects on the compressive strength of two-dimensional cellular solids. Zbl 0900.73667
Silva, Matthew J.; Gibson, Lorna J.
15
1997
Preliminary assessment of sandwich plates subject to blast loads. Zbl 1045.74558
Xue, Zhenyu; Hutchinson, John W.
15
2003
The numerical assessment of elastic-plastic sheets under variable mechanical and thermal loads using a simplified two-surface yield condition. Zbl 0669.73029
Weichert, D.; Gross-Weege, J.
15
1988
An exact solution for buckling of functionally graded circular plates based on higher-order shear deformation plate theory under uniform radial compression. Zbl 1264.74065
Najafizadeh, M. M.; Heydari, H. R.
14
2008
Analysis of rectangular laminated composite plates via FSDT meshless method. Zbl 1026.74082
Wang, J.; Liew, K. M.; Tan, M. J.; Rajendran, S.
14
2002
Ideal forming. II: Sheet forming with optimum deformation. Zbl 0765.73027
Chung, Kwansoo; Richmond, Owen
14
1992
Finite element method for sheet forming based on an anisotropic strain-rate potential and the convected coordinate system. Zbl 0839.73075
Yoon, J. W.; Song, I. S.; Yang, D. Y.; Chung, K.; Barlat, F.
14
1995
Frequency characteristics of a thin rotating cylindrical shell using the generalized differential quadrature method. Zbl 0899.73270
Hua, Li; Lam, K. Y.
14
1998
Generalized differential quadrature for free vibration of rotating composite laminated conical shell with various boundary conditions. Zbl 1116.74439
Ng, T. Y.; Li, Hua; Lam, K. Y.
14
2003
A model of large-strain cyclic plasticity and its application to springback simulation. Zbl 1049.74014
Yoshida, F.; Uemori, T.
14
2003
A single cone-cap plasticity with an isotropic hardening rule for powder materials. Zbl 1192.74041
Khoei, A. R.; Azami, A. R.
14
2005
Stochastic analysis of compositionally graded plates with system randomness under static loading. Zbl 1192.74232
Yang, J.; Liew, K. M.; Kitipornchai, S.
14
2005
Comparison of solution behaviour for three models of pressure-dependent plasticity: a simple analytical example. Zbl 1192.74038
Alexandrov, S.; Harris, D.
14
2006
Influence of invariant material parameters on the flexural optimal design of thin anisotropic laminates. Zbl 1264.74187
Vannucci, Paolo
13
2009
Stress concentration factor due to a circular hole in functionally graded panels under uniaxial tension. Zbl 1264.74075
Kubair, D. V.; Bhanu-Chandar, B.
13
2008
On the rotating elastic-plastic solid disks of variable thickness having concave profiles. Zbl 1026.74044
Eraslan, Ahmet N.; Orcan, Yusuf
13
2002
Ideal forming. I: Homogeneous deformation with minimum plastic work. Zbl 0765.73026
Chung, Kwansoo; Richmond, Owen
13
1992
Limit analysis theorems for implicit standard materials: Application to the unilateral contact with dry friction and the non-associated flow rules in soils and rocks. Zbl 0898.73022
De Saxcé, G.; Bousshine, L.
13
1998
Simulation of springback. Zbl 0986.74522
Li, K. P.; Carden, W. P.; Wagoner, R. H.
13
2002
Piecewise approximate analytical solutions for a Jeffcott rotor with a snubber ring. Zbl 0993.70500
Karpenko, Evgueni V.; Wiercigroch, Marian; Pavlovskaia, Ekatarina E.; Cartmell, Matthew P.
13
2002
Vibration of an Euler–Bernoulli beam on elastic end supports and with up to three step changes in cross-section. Zbl 1113.74351
Naguleswaran, S.
13
2002
Free vibration of two-side simply-supported laminated cylindrical panels via the mesh-free kp-Ritz method. Zbl 1112.74400
Zhao, X.; Ng, T. Y.; Liew, K. M.
13
2004
On Michell trusses. Zbl 0164.26302
Hegemier, G. A.; Prager, W.
13
1969
Nonlinear free and forced vibration of simply supported shear deformable laminated plates with piezoelectric actuators. Zbl 1192.74181
Huang, Xiao Lin; Shen, Hui Shen
13
2005
Two-dimensional contact problem for a coating-graded layer-substrate structure under a rigid cylindrical punch. Zbl 1264.74180
Yang, Jie; Ke, Liao-Liang
12
2008
Natural frequencies, modes and critical speeds of axially moving Timoshenko beams with different boundary conditions. Zbl 1264.74101
Tang, Youqi; Chen, Liqun; Yang, Xiaodong
12
2008
Rotary inertia and temperature effects on nonlinear vibration, steady-state response and stability of an axially moving beam with time-dependent velocity. Zbl 1264.74088
Ghayesh, M. H.; Khadem, S. E.
12
2008
Effect of rotation and thermal relaxation on Rayleigh waves in piezothermoelastic half space. Zbl 1264.74126
Sharma, J. N.; Walia, Vishal; Gupta, S. K.
12
2008
New rational interpolation functions for finite element analysis of rotating beams. Zbl 1264.74262
Gunda, Jagadish Babu; Ganguli, Ranjan
12
2008
Vibration of multi-walled carbon nanotubes by generalized shear deformation theory. Zbl 1264.74085
Aydogdu, Metin
12
2008
A continuum plasticity model for the constitutive and indentation behaviour of foamed metals. Zbl 0986.74013
Miller, Ronald E.
12
2000
Comprehensive exact solutions for free vibrations of thick annular sectorial plates with simply supported radial edges. Zbl 0841.73037
McGee, O. G.; Huang, C. S.; Leissa, A. W.
12
1995
Nonlinear vibration of plates by the hierarchical finite element and continuation methods. Zbl 0958.74026
Ribeiro, P.; Petyt, M.
12
1999
Analytical buckling solutions for Mindlin plates involving free edges. Zbl 0865.73020
Liew, K. M.; Xiang, Y.; Kitipornchai, S.
12
1996
Transient one-dimensional heat conduction problems solved by finite element. Zbl 1192.74094
Wang, Bao-Lin; Mai, Yiu-Wing
12
2005
Metal sandwich plates optimized for pressure impulses. Zbl 1192.74294
Hutchinson, John W.; Xue, Zhenyu
12
2005
Contact problems for the thin elastic layer. Zbl 0712.73084
Barber, J. R.
12
1990
Limit analysis in axisymmetrical problems: numerical determination of complete statical solutions. Zbl 0481.73033
Pastor, J.; Turgeman, S.
11
1982
Integral equation methods for analysis of piece-wise non-homogeneous three-dimensional elastic solids of arbitrary shape. Zbl 0354.73005
Banerjee, P. K.
11
1976
The forming limit curve for bending processes. Zbl 0409.73027
Marciniak, Zdzislaw; Kuczynski, Kazimierz
11
1979
Surface instabilities on statically strained plastic solids. Zbl 0428.73034
Hutchinson, J. W.; Tvergaard, V.
11
1980
Exact solutions for the free in-plane vibrations of rectangular plates. Zbl 1264.74108
Xing, Y. F.; Liu, B.
11
2009
Shear deformation of voids with contact modelled by internal pressure. Zbl 1264.74022
Tvergaard, Viggo
11
2008
Growth and coalescence of non-spherical voids in metals deformed at elevated temperature. Zbl 1045.74590
Klöcker, Helmut; Tvergaard, Viggo
11
2003
Plane strain elastic-plastic bending of a strain-hardening curved beam. Zbl 0990.74031
Dadras, Parviz
11
2001
Elastic-plastic stresses in rotating annular disk of variable thickness and variable density. Zbl 0825.73340
Güven, U.
11
1992
Free vibration of composite laminated conical shells. Zbl 0825.73343
Tong, Liyong
11
1993
Exact solution of a compositionally graded piezoelectric layer under uniform stretch, bending and twisting. Zbl 1035.74025
Lim, C. W.; He, L. H.
11
2001
Constitutive modeling of cyclic plasticity with emphasis on ratchetting. Zbl 0913.73024
Ohno, N.
11
1998
Tractive rolling of dissimilar elastic cylinders. Zbl 0675.73076
Nowell, D.; Hills, D. A.
11
1988
Coupled bending-bending vibrations of pre-twisted cantilever blading allowing for shear deflection and rotary inertia by the Reissner method. Zbl 0472.73059
Subrahmanyam, K. B.; Kulkarni, S. V.; Rao, J. S.
10
1981
Finite element method for rigid-plastic analysis of metal forming - Formulation for finite deformation. Zbl 0488.73039
Osakada, K.; Nakano, J.; Mori, K.
10
1982
A viscous shell formulation for the analysis of thin sheet metal forming. Zbl 0511.73072
Onate, E.; Zienkiewicz, O. C.
10
1983
A boundary-integral equation formulation for time-dependent inelastic deformation in metals. Zbl 0372.73036
Kumar, Virendra; Mukherjee, Subrata
10
1977
A direct formulation and numerical implementation of the boundary element method for two-dimensional problems of elasto-plasticity. Zbl 0427.73076
Banerjee, P. K.; Cathie, D. N.
10
1980
Geometrically nonlinear analysis of functionally graded shells. Zbl 1264.74153
Zhao, X.; Liew, K. M.
16
2009
Influence of invariant material parameters on the flexural optimal design of thin anisotropic laminates. Zbl 1264.74187
Vannucci, Paolo
13
2009
Exact solutions for the free in-plane vibrations of rectangular plates. Zbl 1264.74108
Xing, Y. F.; Liu, B.
11
2009
Limit analysis of elastoplastic frames considering 2nd-order geometric nonlinearity and displacement constraints. Zbl 1264.74021
Tangaramvong, S.; Tin-Loi, F.
10
2009
Static electromechanical response of smart composite/sandwich plates using an efficient finite element with physical and electric nodes. Zbl 1264.74166
Kapuria, S.; Kulkarni, S. D.
5
2009
A discontinuous quasi-upper bound limit analysis approach with sequential linear programming mesh adaptation. Zbl 1264.74248
Milani, G.; Lourenço, P. B.
3
2009
Finite element simulation of springback for a channel draw process with drawbead using different hardening models. Zbl 1264.74274
Taherizadeh, Aboozar; Ghaei, Abbas; Green, Daniel E.; Altenhof, William J.
3
2009
Numerical and experimental study of multi-contact on an elastic half-space. Zbl 1264.74171
Cesbron, J.; Yin, H. P.; Anfosso-Lédée, F.; Duhamel, D.; Le Houédec, D.; Feng, Z. Q.
2
2009
Analytical formulation of mode-coupling instability in disc-pad coupled system. Zbl 1264.74116
Kang, Jaeyoung; Krousgrill, Charles M.; Sadeghi, Farshid
2
2009
Instability and vibration of a rotating Timoshenko beam with precone. Zbl 1264.74092
Lee, Sen-Yung; Lin, Shueei-Muh; Lin, Yu-Sheng
2
2009
Comparative study of thermal post-buckling analysis of uniform slender shear flexible columns using rigorous finite element and intuitive formulations. Zbl 1264.74060
Gupta, R. K.; Babu, Gunda Jagadish; Janardhan, G. Ranga; Rao, G. Venkateswara
2
2009
GND accumulation in bi-crystal deformation: crystal plasticity analysis and comparison with experiments. Zbl 1264.74030
Liang, H.; Dunne, F. P. E.
2
2009
Stability of confined thin-walled steel cylinders under external pressure. Zbl 1264.74067
Vasilikis, Daniel; Karamanos, Spyros A.
1
2009
Behavior of a rhombus frame of nonlinear elastic material under large deflection. Zbl 1264.74158
Shatarat, Nasim; Al-Sadder, Samir; Katkhuda, Hasan; Qablan, Husam; Shatnawi, Anis
1
2009
Dynamic analysis of a rotating beam subjected to repeating axial and transverse forces for simulating a lathing process. Zbl 1264.74139
Huang, Y. M.; Yang, M. L.
1
2009
Squeal analysis of gyroscopic disc brake system based on finite element method. Zbl 1264.74115
Kang, Jaeyoung
1
2009
Numerical derivation of constitutive models for unbonded flexible risers. Zbl 1264.74191
Alfano, G.; Bahtui, A.; Bahai, H.
1
2009
Constitutive modelling of the anisotropic creep behaviour of nickel-base single crystal superalloys. Zbl 1264.74025
Vladimirov, Ivaylo N.; Reese, Stefanie; Eggeler, Gunther
1
2009
Vibration amplitude and thermal effects on the nonlinear behavior of thin circular functionally graded plates. Zbl 1264.74084
Allahverdizadeh, A.; Naei, M. H.; Nikkhah Bahrami, M.
17
2008
An exact solution for buckling of functionally graded circular plates based on higher-order shear deformation plate theory under uniform radial compression. Zbl 1264.74065
Najafizadeh, M. M.; Heydari, H. R.
14
2008
Stress concentration factor due to a circular hole in functionally graded panels under uniaxial tension. Zbl 1264.74075
Kubair, D. V.; Bhanu-Chandar, B.
13
2008
Two-dimensional contact problem for a coating-graded layer-substrate structure under a rigid cylindrical punch. Zbl 1264.74180
Yang, Jie; Ke, Liao-Liang
12
2008
Natural frequencies, modes and critical speeds of axially moving Timoshenko beams with different boundary conditions. Zbl 1264.74101
Tang, Youqi; Chen, Liqun; Yang, Xiaodong
12
2008
Rotary inertia and temperature effects on nonlinear vibration, steady-state response and stability of an axially moving beam with time-dependent velocity. Zbl 1264.74088
Ghayesh, M. H.; Khadem, S. E.
12
2008
Effect of rotation and thermal relaxation on Rayleigh waves in piezothermoelastic half space. Zbl 1264.74126
Sharma, J. N.; Walia, Vishal; Gupta, S. K.
12
2008
New rational interpolation functions for finite element analysis of rotating beams. Zbl 1264.74262
Gunda, Jagadish Babu; Ganguli, Ranjan
12
2008
Vibration of multi-walled carbon nanotubes by generalized shear deformation theory. Zbl 1264.74085
Aydogdu, Metin
12
2008
Shear deformation of voids with contact modelled by internal pressure. Zbl 1264.74022
Tvergaard, Viggo
11
2008
Vibration of skew plates by the MLS-Ritz method. Zbl 1264.74112
Zhou, L.; Zheng, W. X.
10
2008
Response of frictional receding contact problems to cyclic loading. Zbl 1264.74169
Ahn, Young Ju; Barber, J. R.
10
2008
Tensionless contact of a finite beam resting on Reissner foundation. Zbl 1264.74181
Zhang, Yin
9
2008
Finite deformations of an initially stressed cylindrical shell under internal pressure. Zbl 1264.74151
Gonçalves, P. B.; Pamplona, D.; Lopes, S. R. X.
7
2008
Finite element simulation of springback in sheet metal forming using local interpolation for tool surfaces. Zbl 1264.74263
Hama, Takayuki; Nagata, Takashi; Teodosiu, Cristian; Makinouchi, Akitake; Takuda, Hirohiko
7
2008
Computational evaluation of strain-rate-dependent deformation behavior of rubber and carbon-black-filled rubber under monotonic and cyclic straining. Zbl 1163.74013
Tomita, Y.; Azuma, K.; Naito, M.
5
2008
Buckling and post-buckling of non-uniform non-linearly elastic rods. Zbl 1264.74062
Lacarbonara, Walter
5
2008
Free vibration of antisymmetric angle-ply-laminated plates including transverse shear deformation: spline method. Zbl 1264.74105
Viswanathan, K. K.; Kim, Kyung Su
5
2008
Dynamic stability of the viscoelastic rotating shaft subjected to random excitation. Zbl 1264.74117
Pavlović, Ratko; Rajković, Predrag; Pavlović, Ivan
4
2008
Exact dynamic stiffness matrix of a Timoshenko three-beam system. Zbl 1264.74094
Li, Jun; Chen, Yong; Hua, Hongxing
4
2008
Free vibration and buckling response of hat-stiffened composite panels under general loading. Zbl 1264.74097
Prusty, B. Gangadhara
4
2008
Confidence bounds on component reliability in the presence of mixed uncertain variables. Zbl 1264.74289
Adduri, Phani R.; Penmetsa, Ravi C.
4
2008
Approximate solution of limit angular speed for externally loaded rotating solid disk. Zbl 1264.74082
Bhowmick, Shubhankar; Misra, Dipten; Saha, Kashi Nath
3
2008
Skew sliding of an elastic cylinder: an investigation of convection in contact. Zbl 1264.74177
Qiu, Hui; Hills, D. A.; Nowell, D.; Dini, D.
3
2008
Effect of compressive axial load on forced transverse vibrations of a double-beam system. Zbl 1264.74110
Zhang, Y. Q.; Lu, Y.; Ma, G. W.
3
2008
Effect of axial force on free vibration of Timoshenko multi-span beam carrying multiple spring-mass systems. Zbl 1264.74109
Yesilce, Yusuf; Demirdag, Oktay
3
2008
Natural frequencies of symmetrically laminated elliptical and circular plates. Zbl 1264.74095
Nallim, Liz G.; Grossi, Ricardo O.
3
2008
Nonlinear free vibration of laminated composite plates on elastic foundation with random system properties. Zbl 1264.74091
Lal, A.; Singh, B. N.; Kumar, R.
3
2008
An alternative approach to the analytical determination of the moment capacity of a thin-walled channel steel section beam. Zbl 1264.74143
Setiyono, Harkali
3
2008
Vibrations of microscale circular plates induced by ultra-fast lasers. Zbl 1264.74100
Sun, Yuxin; Saka, Masumi
3
2008
Dynamic and quasi-static behaviors of magneto-thermo-elastic stresses in a conducting hollow circular cylinder subjected to an arbitrary variation of magnetic field. Zbl 1264.74052
Higuchi, M.; Kawamura, R.; Tanigawa, Y.
3
2008
Dynamic finite element method for generally laminated composite beams. Zbl 1264.74264
Jun, Li; Hua, Hongxing; Shen, Rongying
3
2008
Thermoelastic damping in cylindrical shells with application to tubular oscillator structures. Zbl 1264.74152
Lu, Pin; Lee, H. P.; Lu, C.; Chen, H. B.
3
2008
Horizontal cylinder-in-cylinder buckling under compression and torsion: review and application to composite drill pipe. Zbl 1264.74069
Wicks, Nathan; Wardle, Brian L.; Pafitis, Demos
3
2008
Dynamic tensile characteristics of TRIP-type and DP-type steel sheets for an auto-body. Zbl 1388.74019
Huh, Hoon; Kim, Seok-Bong; Song, Jung-Han; Lim, Ji-Ho
2
2008
Heterogeneous tensile test on elastoplastic metallic sheets: comparison between FEM simulations and full-field strain measurements. Zbl 1264.74016
Belhabib, S.; Haddadi, H.; Gaspérini, M.; Vacher, P.
2
2008
Pull-in instability of two opposing microcantilever arrays with different bending rigidities. Zbl 1264.74071
Zhu, Jian
2
2008
Stress analysis in a cracked strip. Zbl 1264.74074
Fotuhi, A. R.; Fariborz, S. J.
2
2008
Exact full-field analysis of strain and displacement for circular disks subjected to partially distributed compressions. Zbl 1264.74148
Ma, Chien-Ching; Hung, Kuang-Ming
2
2008
A new algorithm for computing the indentation of a rigid body of arbitrary shape on a viscoelastic half-space. Zbl 1264.74173
Kozhevnikov, I. F.; Cesbron, J.; Duhamel, D.; Yin, H. P.; Anfosso-Lédée, F.
2
2008
Shakedown analysis of beams using nonlinear kinematic hardening materials coupled with continuum damage mechanics. Zbl 1264.74020
Nayebi, A.; El Abdi, R.
2
2008
Sliding of general frictional complete contacts. Zbl 1264.74172
Karuppanan, S.; Hills, D. A.
2
2008
Free-edge stresses in general composite laminates. Zbl 1264.74032
Nosier, A.; Maleki, M.
2
2008
Experimental and theoretical studies on buckling of thin spherical shells under axial loads. Zbl 1264.74059
Gupta, N. K.; Sheriff, N. Mohamed; Velmurugan, R.
2
2008
A piezoelectric screw dislocation interacting with an elliptical inclusion containing electrically conductive interfacial rigid lines. Zbl 1264.74050
Fang, Q. H.; Liu, Y. W.; Wen, P. H.
2
2008
3D upper bound limit analysis of multi-leaf masonry walls. Zbl 1264.74249
Milani, Gabriele
2
2008
Dynamic stability analysis of pretwisted aerofoil cross-section blade packets under rotating conditions. Zbl 1264.74268
Şakar, Gürkan; Sabuncu, Mustafa
1
2008
Dynamic characteristics of a generalised suspension system. Zbl 1264.74111
Zhou, Ding; Ji, Tianjian
1
2008
In-plane elastic moduli and plastic collapse strength of regular hexagonal honeycombs with dual imperfections. Zbl 1264.74193
Yang, Mei-Yi; Huang, Jong-Shin; Sam, Chan-Pang
1
2008
Dynamic analysis for three-dimensional laminated plates and panels with damping. Zbl 1264.74098
Qing, Guanghui; Liu, Yanhong; Guo, Qing; Zhang, Dedeng
1
2008
A study on formulation of objective functions for determining material models. Zbl 1264.74017
Cao, J.; Lin, J.
1
2008
Dynamics of vibro-impact mechanical systems with large dissipation. Zbl 1264.70050
Luo, G. W.; Lv, X. H.; Zhu, X. F.
1
2008
Stability, bifurcation and chaos of closed flexible cylindrical shells. Zbl 1264.74119
Krysko, V. A.; Awrejcewicz, J.; Saveleva, N. E.
1
2008
Predicting polygonal-shaped defects during hot ring rolling using a rigid-viscoplastic finite element method. Zbl 1264.74267
Moon, Ho Keun; Lee, Min Cheol; Joun, Man Soo
1
2008
A comparison of critical distance methods for fracture prediction. Zbl 1264.74237
Taylor, David; Kasiri, Saeid
1
2008
On the nonlinear vibration of heated corrugated circular plates with shallow sinusoidal corrugations. Zbl 1264.74106
Wang, Yonggang; Gao, Dan; Wang, Xinzhi
1
2008
Nonlinear dynamic analysis of rub-impact rotor supported by turbulent journal bearings with non-linear suspension. Zbl 1264.70051
Chang-Jian, Cai-Wan; Chen, Chao-Kuang
1
2008
A general constitutive relation for linear elastic foams. Zbl 1264.74194
Zhang, T.
1
2008
Three-parameter approach for elastic-plastic fracture of the semi-elliptical surface crack under tension. Zbl 1264.74254
Zhao, Junhua; Guo, Wanlin; She, Chongmin
1
2008
Thermoelastic lateral-torsional buckling of fixed slender beams under linear temperature gradient. Zbl 1264.74066
Pi, Yong-Lin; Bradford, Mark Andrew
1
2008
Vibration analysis of rectangular plates with edge V-notches. Zbl 1264.74090
Huang, C. S.; Leissa, A. W.; Liao, S. C.
1
2008
Effect of small harmonic oscillations during the steady rolling of a cylinder on a plane. Zbl 1264.74170
Barber, J. R.; Ciavarella, M.; Afferrante, L.; Sackfield, A.
1
2008
An exact finite strip for the calculation of relative post-buckling stiffness of I-section struts. Zbl 1264.74058
Ghannadpour, S. A. M.; Ovesy, H. R.
1
2008
A simple model to simulate electromagnetic sheet free bulging process. Zbl 1264.74048
Correia, J. P. M.; Siddiqui, M. A.; Ahzi, S.; Belouettar, S.; Davies, R.
1
2008
Vibration and buckling characteristics of weld-bonded rectangular plates using the flexibility function approach. Zbl 1264.74103
Tripathy, Biswajit; Suryanarayan, Srinivasan
1
2008
Liquid drop impact on solid surface with application to water drop erosion on turbine blades. II: Axisymmetric solution and erosion analysis. Zbl 1264.74183
Zhou, Qulan; Li, Na; Chen, Xi; Xu, Tongmo; Hui, Shien; Zhang, Di
1
2008
Experimental based finite element simulation of cold isostatic pressing of metal powders. Zbl 1264.74273
Szanto, M.; Bier, W.; Frage, N.; Hartmann, S.; Yosibash, Z.
1
2008
Transverse and longitudinal vibrations of a frame structure due to a moving trolley and the hoisted object using moving finite element. Zbl 1264.74107
Wu, Jia-Jang
1
2008
Postbuckling of 3D braided composite cylindrical shells under combined external pressure and axial compression in thermal environments. Zbl 1264.74064
Li, Zhi-Min; Shen, Hui-Shen
1
2008
Non-smooth modelling of billiard- and superbilliard-ball collisions. Zbl 1264.70038
Doménech, Antonio
1
2008
An evaluation of some recent yield criteria for industrial simulations of sheet forming processes. Zbl 1264.74018
Mattiasson, Kjell; Sigvant, Mats
1
2008
Dynamics of a freely rotating cutting brush subjected to variable speed. Zbl 1264.74104
Useche, L. V. Vanegas; Wahab, M. M. Abdel; Parker, G. A.
1
2008
Dynamics of a viscoelastic rotor shaft using augmenting thermodynamic fields – a finite element approach. Zbl 1264.74099
Roy, H.; Dutt, J. K.; Datta, P. K.
1
2008
Stress analysis of a finite wedge weakened by cavities. Zbl 1192.74032
Faal, R. T.; Fariborz, S. J.; Daghyani, H. R.
9
2007
Diffraction of sound by a poroelastic cylindrical absorber near an impedance plane. Zbl 1192.76047
Hasheminejad, Seyyed M.; Alibakhshi, M. A.
5
2007
Axisymmetric extrusion through adaptable dies. III: Minimum pressure streamlined die shapes. Zbl 1192.74005
Gordon, W. A.; Van Tyne, C. J.; Moon, Y. H.
4
2007
Axisymmetric extrusion through adaptable dies. I: Flexible velocity fields and power terms. Zbl 1192.74003
Gordon, W. A.; Van Tyne, C. J.; Moon, Y. H.
2
2007
Axisymmetric extrusion through adaptable dies. II: Comparison of velocity fields. Zbl 1192.74004
Gordon, W. A.; Van Tyne, C. J.; Moon, Y. H.
2
2007
Static analysis of a Bickford beam by means of the DQEM. Zbl 1192.74212
Franciosi, Claudio; Tomasiello, Stefania
2
2007
Nonlinear dynamics of a spur gear pair with time-varying stiffness and backlash based on incremental harmonic balance method. Zbl 1192.74148
Shen, Yongjun; Yang, Shaopu; Liu, Xiandong
18
2006
Comparison of solution behaviour for three models of pressure-dependent plasticity: a simple analytical example. Zbl 1192.74038
Alexandrov, S.; Harris, D.
14
2006
Comparison of prediction on effective elastic property and shape optimization of truss material with periodic microstructure. Zbl 1192.74312
Yan, Jun; Cheng, Gengdong; Liu, Shutian; Liu, Ling
10
2006
...and 1097 more Documents
all top 5

Cited by 5,353 Authors

50 Liew, Kim Meow
27 Alexandrov, Sergei Yu.
21 Zhang, Wei
20 Zenkour, Ashraf M.
18 Civalek, Ömer
18 Reddy, Junuthula Narasimha
16 Fleck, Norman A.
15 Chen, Liqun
15 Ferreira, António Joaquim Mendes
15 Rozvany, George I. N.
15 Shen, Huishen
15 Wang, Xinwei
14 Hills, David A.
14 Nguyen-Xuan, Hung
14 Shariyat, M.
14 Wagoner, Robert H.
12 Argatov, Ivan I.
12 Cheng, Changjun
12 Fu, Yiming
12 Khoei, Amir R.
12 Lewiński, Tomasz
12 Nguyen-Thoi, Trung
12 Vannucci, Paolo
12 Yoon, Jeong-Whan
12 Zhang, Lu-Wen
11 Barlat, Frédéric
11 Chung, Kwansoo
11 Eslami, Mohamad Reza
11 Kitipornchai, Sritawat
11 Lee, Myoung-Gyu
11 Liu, Yinghua
11 Saidi, Ali Reza
11 Tin-Loi, Francis
11 Yao, Minghui
10 Chen, Weiqiu
10 Ding, Hu
10 Iesan, Dorin
10 Meguid, Shaker A.
10 Ohno, Nobutada
10 Polizzotto, Castrenze
10 Rabczuk, Timon
10 Yang, Jie
9 Cazacu, Oana
9 de Saxcé, Géry
9 Deshpande, Vikram S.
9 Hasheminejad, Seyyed Mohammad
9 Jafari, Ali Asghar
9 Lee, Kangyong
9 Mishuris, Gennady S.
9 Sapountzakis, Evangelos John
9 Yas, M. H.
8 Allam, Mohammed N. M.
8 Dini, Daniele
8 Elishakoff, Isaac
8 Failla, Giuseppe
8 Jeng, Yeau-Ren
8 Kondo, Djimédo
8 Lal, Achchhe
8 Li, Fengming
8 Mackerle, Jaroslav
8 Naeem, Muhammad Nawaz
8 Singh, Bhrigu Nath
8 Tvergaard, Viggo
7 Attarnejad, Reza
7 Caddemi, Salvatore
7 Chakraverty, Snehashish
7 Chen, Jen-San
7 Dai, Hongliang
7 Eftekhari, S. Aboozar
7 Ghadiri, Majid
7 Ghayesh, Mergen H.
7 Hao, Yuxin
7 Kanoria, Mridula
7 Liu, Gui-Rong
7 Maier, Giulio
7 Natroshvili, David
7 Nguyen, Dinh Kien
7 Owen, D. Roger J.
7 Sobhani Aragh, B.
7 Tang, Youqi
7 Tangaramvong, Sawekchai
7 Thai, Huu-Tai
7 Wiercigroch, Marian
7 Xing, Yufeng
6 Akbarov, Surkay D.
6 Aleksandrov, S. E.
6 Altenbach, Holm
6 Ansari, Reza
6 Barber, James R.
6 Caliò, Ivo
6 Carrera, Erasmo
6 Cen, Zhangzhi
6 Chen, Fangqi
6 Coman, Ciprian D.
6 Dawe, D. J.
6 Deng, Zichen
6 Dourakopoulos, John Andrew
6 Dumir, P. C.
6 Dung, Dao Van
6 Eraslan, Ahmet N.
...and 5,253 more Authors
all top 5

Cited in 214 Journals

316 Acta Mechanica
277 European Journal of Mechanics. A. Solids
274 Computer Methods in Applied Mechanics and Engineering
260 Applied Mathematical Modelling
147 Meccanica
138 International Journal of Solids and Structures
136 Journal of the Mechanics and Physics of Solids
115 Archive of Applied Mechanics
108 International Journal for Numerical Methods in Engineering
92 International Journal of Plasticity
91 Engineering Analysis with Boundary Elements
85 Computational Mechanics
71 Mathematical Problems in Engineering
64 Applied Mathematics and Mechanics. (English Edition)
60 International Journal of Engineering Science
57 Journal of Vibration and Control
55 Applied Mathematics and Computation
53 Nonlinear Dynamics
45 International Journal of Structural Stability and Dynamics
43 Engineering Computations
42 Acta Mechanica Sinica
39 Communications in Numerical Methods in Engineering
39 Structural and Multidisciplinary Optimization
38 Mathematics and Mechanics of Solids
31 Journal of Elasticity
30 Journal of Engineering Mathematics
27 Communications in Nonlinear Science and Numerical Simulation
26 AMM. Applied Mathematics and Mechanics. (English Edition)
25 Mechanics Research Communications
25 Continuum Mechanics and Thermodynamics
23 Ingenieur-Archiv
23 International Journal of Computational Methods
22 Computers & Mathematics with Applications
20 ZAMP. Zeitschrift für angewandte Mathematik und Physik
20 Archives of Computational Methods in Engineering
19 Journal of Applied Mechanics and Technical Physics
17 International Journal of Fracture
16 Mathematical and Computer Modelling
15 Wave Motion
15 Chaos, Solitons and Fractals
15 Journal of Computational and Applied Mathematics
14 International Applied Mechanics
14 ZAMM. Zeitschrift für Angewandte Mathematik und Mechanik
14 Proceedings of the Royal Society of London. Series A. Mathematical, Physical and Engineering Sciences
14 International Journal for Computational Methods in Engineering Science and Mechanics
12 International Journal for Numerical and Analytical Methods in Geomechanics
12 Journal of the Franklin Institute
12 International Journal of Bifurcation and Chaos in Applied Sciences and Engineering
11 Journal of Computational Physics
11 Mechanism and Machine Theory
11 Advances in Applied Mathematics and Mechanics
10 Advances in Engineering Software
10 Nonlinear Analysis. Real World Applications
9 Journal of Applied Mathematics and Mechanics
9 Journal of Fluid Mechanics
9 Mathematical Methods in the Applied Sciences
9 Multibody System Dynamics
9 Science China. Technological Sciences
8 Soviet Applied Mechanics
8 Journal of Shanghai University
8 International Journal of Nonlinear Sciences and Numerical Simulation
8 Inverse Problems in Science and Engineering
8 International Journal for Numerical Methods in Biomedical Engineering
7 Journal of Mathematical Analysis and Applications
7 Journal of Optimization Theory and Applications
7 Sādhanā
7 Proceedings of the Royal Society of London. A. Mathematical, Physical and Engineering Sciences
6 Zeitschrift für Angewandte Mathematik und Mechanik (ZAMM)
6 Science in China. Series E
5 Applicable Analysis
5 Archive for Rational Mechanics and Analysis
5 Computers and Fluids
5 Dynamics and Stability of Systems
5 Journal of Applied Mathematics
5 Journal of Zhejiang University. Science A
4 International Journal of Heat and Mass Transfer
4 International Journal for Numerical Methods in Fluids
4 Automatica
4 Optimization and Engineering
4 Vestnik Samarskogo Gosudarstvennogo Tekhnicheskogo Universiteta. Seriya Fiziko-Matematicheskie Nauki
4 Symmetry
4 Arabian Journal for Science and Engineering
3 Archives of Mechanics
3 International Journal of Control
3 Prikladnaya Matematika i Mekhanika
3 Mathematics and Computers in Simulation
3 Nonlinear Analysis. Theory, Methods & Applications. Series A: Theory and Methods
3 Applied Mathematics Letters
3 M\(^3\)AS. Mathematical Models & Methods in Applied Sciences
3 Vestnik St. Petersburg University. Mathematics
3 Analysis and Applications (Singapore)
3 PAMM. Proceedings in Applied Mathematics and Mechanics
3 International Journal of Applied and Computational Mathematics
2 International Journal of Modern Physics B
2 International Journal of Mathematical Education in Science and Technology
2 International Journal of Theoretical Physics
2 Mathematical Proceedings of the Cambridge Philosophical Society
2 Moscow University Mechanics Bulletin
2 Journal of Theoretical and Applied Mechanics (Sofia)
2 Fuzzy Sets and Systems
...and 114 more Journals
all top 5

Cited in 46 Fields

3,190 Mechanics of deformable solids (74-XX)
317 Numerical analysis (65-XX)
163 Fluid mechanics (76-XX)
156 Mechanics of particles and systems (70-XX)
115 Partial differential equations (35-XX)
87 Classical thermodynamics, heat transfer (80-XX)
64 Operations research, mathematical programming (90-XX)
55 Systems theory; control (93-XX)
53 Ordinary differential equations (34-XX)
48 Calculus of variations and optimal control; optimization (49-XX)
40 Dynamical systems and ergodic theory (37-XX)
34 Biology and other natural sciences (92-XX)
33 Statistical mechanics, structure of matter (82-XX)
20 Optics, electromagnetic theory (78-XX)
11 Computer science (68-XX)
11 Geophysics (86-XX)
10 Integral equations (45-XX)
8 History and biography (01-XX)
8 Operator theory (47-XX)
7 Real functions (26-XX)
6 Harmonic analysis on Euclidean spaces (42-XX)
6 Information and communication theory, circuits (94-XX)
4 General and overarching topics; collections (00-XX)
4 Functional analysis (46-XX)
4 Differential geometry (53-XX)
4 Global analysis, analysis on manifolds (58-XX)
4 Statistics (62-XX)
3 Combinatorics (05-XX)
3 Linear and multilinear algebra; matrix theory (15-XX)
3 Integral transforms, operational calculus (44-XX)
3 Probability theory and stochastic processes (60-XX)
3 Quantum theory (81-XX)
2 Measure and integration (28-XX)
2 Approximations and expansions (41-XX)
2 Convex and discrete geometry (52-XX)
2 Astronomy and astrophysics (85-XX)
1 Mathematical logic and foundations (03-XX)
1 Order, lattices, ordered algebraic structures (06-XX)
1 Number theory (11-XX)
1 Algebraic geometry (14-XX)
1 Topological groups, Lie groups (22-XX)
1 Functions of a complex variable (30-XX)
1 Potential theory (31-XX)
1 Special functions (33-XX)
1 Algebraic topology (55-XX)
1 Game theory, economics, finance, and other social and behavioral sciences (91-XX)

Citations by Year