swMATH ID: 7161
Software Authors: Dassault Systèmes
Description: Abaqus/Standard employs solution technology ideal for static and low-speed dynamic events where highly accurate stress solutions are critically important. Examples include sealing pressure in a gasket joint, steady-state rolling of a tire, or crack propagation in a composite airplane fuselage. Within a single simulation, it is possible to analyze a model both in the time and frequency domain. For example, one may start by performing a nonlinear engine cover mounting analysis including sophisticated gasket mechanics. Following the mounting analysis, the pre-stressed natural frequencies of the cover can be extracted, or the frequency domain mechanical and acoustic response of the pre-stressed cover to engine induced vibrations can be examined. Abaqus/Standard is supported within the Abaqus/CAE modeling environment for all common pre- and postprocessing needs. The results at any point within an Abaqus/Standard run can be used as the starting conditions for continuation in Abaqus/Explicit. Similarly, an analysis that starts in Abaqus/Explicit can be continued in Abaqus/Standard. The flexibility provided by this integration allows Abaqus/Standard to be applied to those portions of the analysis that are well-suited to an implicit solution technique, such as static, low-speed dynamic, or steady-state transport analyses; while Abaqus/Explicit may be applied to those portions of the analysis where high-speed, nonlinear, transient response dominates the solution.
Homepage: http://www.3ds.com/products/simulia/portfolio/abaqus/abaqus-portfolio/abaqusstandard/
Related Software: ABAQUS; UMAT; Matlab; ABAQUS/Explicit; Mathematica; HYPLAS; LS-DYNA; FEAPpv; ParaView; ANSYS; DOT; GENESIS; GitHub; SLEPc; AceFEM; FEniCS; deal.ii; Neper; DREAM.3D; IMSL Numerical Libraries
Cited in: 215 Publications
all top 5

Cited by 516 Authors

13 Fuentes, Alfonso
12 Litvin, Faydor L.
9 Gonzalez-Perez, Ignacio
5 Vadillo, Guadalupe
4 Bolzon, Gabriella
4 Fernández-Sáez, José
4 Kapuria, Santosh
4 Liu, Wing Kam
4 Sze, Kam-Yim
4 Vecchiato, Daniele
4 Wagoner, Robert H.
3 Deshpande, Vikram S.
3 Fleck, Norman A.
3 Guo, Yujie
3 Hayasaka, Kenichi
3 Hutchinson, John Woodside
3 Maier, Giulio
3 Park, Gyung-Jin
3 Reese, Stefanie
3 Ruess, Martin
3 Vladimirov, Ivaylo N.
2 Adams, Brent L.
2 Buljak, Vladimir
2 Cheng, Lin
2 Deeks, Andrew J.
2 Diana, Vito
2 Edlund, Ulf
2 Faleskog, Jonas
2 Flores, Fernando G.
2 Fredriksson, Per G.
2 Gao, Jiaying
2 García Aznar, José Manuel
2 Ghosh, Somnath
2 Glaessgen, E. H.
2 Greene, M. Steven
2 Handschuh, Robert F.
2 Hild, François
2 Kulkarni, S. D.
2 Kysar, Jeffrey W.
2 Lee, Myoung-Gyu
2 Li, Hengyang
2 Mkaddem, Ali
2 Park, Ki-Jong
2 Pedrero, José I.
2 Pietryga, Michael P.
2 Potiron, Alain
2 Reboul, J.
2 Saether, Erik
2 Schillinger, Dominik
2 Sep, Thomas M.
2 Tang, Shan
2 Triantafyllou, Savvas P.
2 Waisman, Haim
2 Xue, Zhenyu
2 Yamakov, V.
2 Yang, Zhenjun
2 Yao, Linquan
2 Yukishima, Kenji
2 Zanzi, Claudio
2 Zou, Zhihui
1 Abbas, Mickaël
1 Abed-Meraim, Farid
1 Adedoyin, Adetokunbo A.
1 Adessina, A.
1 Adib, Ata
1 Ageno, Matteo
1 Airoldi, Alessandro
1 Alfano, Marco
1 Allaire, Grégoire
1 Altenhof, William J.
1 Amaya, Kenji
1 Ananthasuresh, G. K.
1 Ansari, Reza
1 Antinucci, Emilio
1 Antona, Juan A.
1 Ao, Dan
1 Aoki, Shigeru
1 Aparicio-Yuste, Raul
1 Araki, Yoshikazu
1 Arbogast, Todd
1 Arghavani, J.
1 Argyris, John Hadji
1 Artés, Mariano
1 Ashby, Michael F.
1 Augustins, L.
1 Auricchio, Ferdinando
1 Baaser, Herbert
1 Bacigalupo, Andrea
1 Bahloul, Riadh
1 Bakamal, A.
1 Balan, Tudor
1 Bammann, Douglas J.
1 Banabic, Dorel
1 Barlat, Frédéric
1 Barthelemy, Jean-Francois M.
1 Bastounis, Effie E.
1 Beckmann, Ralf
1 Bellini, Chiara
1 Bennett, Joel G.
1 Bettadahalli Channakeshava, Anil
...and 416 more Authors
all top 5

Cited in 44 Serials

54 Computer Methods in Applied Mechanics and Engineering
33 International Journal for Numerical Methods in Engineering
17 Journal of the Mechanics and Physics of Solids
14 Computational Mechanics
13 European Journal of Mechanics. A. Solids
9 International Journal of Solids and Structures
8 International Journal of Plasticity
7 Acta Mechanica
4 International Journal of Computational Methods
3 International Journal of Mechanical Sciences
3 Engineering Analysis with Boundary Elements
3 Mathematical Problems in Engineering
3 International Journal for Computational Methods in Engineering Science and Mechanics
2 International Journal for Numerical and Analytical Methods in Geomechanics
2 Applied Mathematics and Computation
2 Meccanica
2 Finite Elements in Analysis and Design
2 Applied Mathematical Modelling
2 Continuum Mechanics and Thermodynamics
2 Mechanism and Machine Theory
2 Structural and Multidisciplinary Optimization
2 International Journal of Fracture
2 Acta Mechanica Sinica
2 International Journal of Structural Stability and Dynamics
1 Computers and Fluids
1 Computers & Mathematics with Applications
1 International Journal of Engineering Science
1 International Journal of Non-Linear Mechanics
1 Journal of Computational Physics
1 ZAMP. Zeitschrift für angewandte Mathematik und Physik
1 Journal of Computational and Applied Mathematics
1 Journal of Optimization Theory and Applications
1 Mechanics Research Communications
1 Numerische Mathematik
1 Computer Aided Geometric Design
1 Archive of Applied Mechanics
1 Communications in Numerical Methods in Engineering
1 Mathematics and Mechanics of Solids
1 Computational Geosciences
1 Optimization and Engineering
1 Mathematical Biosciences and Engineering
1 Inverse Problems in Science and Engineering
1 Journal of Zhejiang University. Science A
1 Proceedings of the Royal Society of London. A. Mathematical, Physical and Engineering Sciences

Citations by Year